Any modification performed on alloys is bound to change their chemistry along with their properties. Exemplifying this behaviour is Stainless Steel 316L Round Bar, which is a modified version of grade 316.
While most of the chemicals remain the same in the chemistry of ASME SA276 grade 316l rod, what makes it so unique is that the alloy has a very low content of carbon. To be precise, the maximum permitted content of carbon in the alloy of the ASTM A479 type 316l hex bar ranges about 0.030%. And this solely is the reason why welding the alloy is possible. Unlike the conventional grade 316, the a276 type 316l rod is not prone to sensitization, nor is it prone to intergranular corrosion. Thus one can expect high quality welds from grade 316L.
Essentially like grade 316, the ASTM a276 grade 316l round bar can be welded with ease using conventional welding techniques without the use of heat treatment prior to welding. In order to stabilize the austenitic microstructure of SS 316l rod, similar to grade 316, nickel and molybdenum are added to its alloy. However, it is important to note that the alloy tends to become weaker with the lowering of carbon content. Hence to increase its strength the 316l Stainless Steel flat bar has added nitrogen in its alloy. Although adding nitrogen to the alloy may not make it as strong as grade 316, the tensile properties are in a similar vicinity.
Compare Stainless Steel 316L Round Bar price with inconel 625 round bar price list
Stainless Steel 316L Round Bar
Outside Diameter : 4mm to 500mm
| Metric | US Bar | ASTM/ Canadian | Japanese | ||||
|---|---|---|---|---|---|---|---|
| Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
| 5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
| 5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
| 6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
| 7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
| 8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
| 9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
| 10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
| 11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
| 12 | 12 | #10 | 1.250 | 32 | 32 | ||
| 14 | 14 | #11 | 1.375 | 35 | 35 | ||
| 16 | 16 | #12 | 1.500 | 38 | 38 | ||
| 18 | 18 | #13 | 1.625 | 41 | 41 | ||
| 20 | 20 | #14 | 1.750 | 44 | 44 | ||
| 22 | 22 | #15 | 1.875 | 48 | 48 | ||
| 25 | 25 | #16 | 2.000 | 51 | 51 | ||
| 28 | 28 | #18 | 2.250 | 57 | 57 | ||
| 32 | 32 | ||||||
| 36 | 36 | ||||||
| 40 | 40 | ||||||
| 44 | 44 | ||||||
| 50 | 50 | ||||||
When you buy AISI 316L round bar in any shape of bar. so put your required diameter and length in weight calculator, so you can get it approx. weight, after that multiply with 316L price per kg in India from reliable website who update online price on daily basis and get the genuine price, also ask for free sample to test the material quality.
| Standard | ASTM A276 /ASME SA276, ASTM A479/ASME SA479 |
| Dimensions Schedule | EN, AISI, JIS, BS, DIN, ASTM, ASME |
| Sizes Available in Round Bars |
range of Outside Diameter : 4mm to 500mm |
| Flat Bars Size Range |
Size: 1/2” to 10” , thickness range: 2mm to 150mm, |
| Hex Bars Size Chart In Mm | 18mm – 57mm (11/16" to 2-3/4″) |
| Size of Bright Bars |
range of Outside Diameter : 4mm to 100mm |
| Sizes and Schedules of Square Bars |
18mm – 47mm (11/16" to 1-3/4″) |
| Stock Length | 1 to 6 Meters Long or Above than it |
| Finishes provided | Rough, BA Finish, Polished, NO.4 Finish, Black, Matt Finish, Bright, Turned |
| Basic Form | Hex (A/F), Square, Ingot, Rectangle,Forging, Billet, Round |
| Description | Per Unit (INR) | Price in USD | Price in EURO |
|---|---|---|---|
| S.s. Round Bar 316 Lvm Dia 6.0mm (C.excise No Vgn(30)26/g.b.adler/rtn/t/2016/887 Dtd 07.10.16 Item No 1) | 1,678 | 22.81 | 18.71 |
| S.s. Round Bar 316 Lvm Dia 2.00mm (C.excise No Vgn(30)26/g.b.adler/rtn/t/2016/887 Dtd 07.10.16 Item No 6) | 2,822 | 38.36 | 31.46 |
| S.s. Round Bar 316 Lvm Dia 8.0mm (C.excise No Vgn(30)26/g.b.adler/rtn/t/2016/887 Dtd 07.10.16 Item No 2) | 1,270 | 17.26 | 14.16 |
| Stainless Steel Rod/bar Round - 304/304l Cf S/s Rod.875 Dia - Assr3097(6pcs) | 498 | 6.77 | 5.55 |
| Mbr-sanmac316l-155 Fl-24-1308 Part No.8405-6541-023 Ss Round Bars (Parts For Decanter Centrifuge) | 271 | 3.68 | 3.02 |
| Mbr-sanmac316l-110 Fl-20-0822 Part No.6920-0128-400 Ss Round Bars (Parts For Decanter Centrifuge) | 285 | 3.87 | 3.18 |
| Mbr-sanmac316l-155 Fl-16-1130 Part No.8405-6541-003 Ss Round Bars (Parts For Decanter Centrifuge) | 271 | 3.68 | 3.02 |
| 293-002525-00 Ssrd01367 T-303 Stainless Steel Round (Ss303 Rd Bar D=38.10mm,l=915mm) | 283 | 3.85 | 3.16 |
| 293-002526-00 Ssrd00237 T-303 Maxx Stainless Steel Cold Finished Round (Ss303 Rd Bar D=42.862mm,l=915mm) | 283 | 3.85 | 3.16 |
| 293-002523-00 Ssrd01091 T-303 Stainless Steel Round (Ss303 Rd Bar D=28.575mm,l=915mm) | 283 | 3.85 | 3.16 |
flat bar sizes in mm |
Flat Bar Size (inch) |
Flat Bar Thickness (mm) |
Flat Bar Thickness (in Inches) |
|---|---|---|---|
22 |
7/8 |
17 & 18 |
2/3 - 5/7 |
25 |
1 |
5 to 20 |
3/16 - 4/5 |
30 |
1-3/16 |
5 to 20 |
3/16 - 4/5 |
32 |
1-1/4 |
6 to 20 |
1/4 - 4/5 |
35 |
1-3/8 |
5 to 20 |
3/16 - 3/16 |
40 |
1-4/7 |
5 to 25 |
3/16 - 1 |
45 |
1-7/9 |
5 to 25 |
3/16 - 1 |
47 |
1-6/7 |
17,25 & 32 |
2/3, 1 & 1-1/4 |
50 |
2 |
5 to 32 |
3/16 - 1-1/4 |
55 |
2-1/16 |
5 to 25 |
3/16 - 1 |
57 |
2-1/4 |
32 |
1-1/4 |
60 |
2-3/8 |
5 to 35 |
3/16 - 1-3/8 |
63 |
2-1/2 |
10 to 30 |
3/8 - 1-3/16 |
65 |
2-5/9 |
10 to 30 & 35 |
3/8 - 1-3/16, & 1-3/8 |
70 |
2-3/4 |
6 to 25 & 40 |
1/4 - 1, & 1-4/7 |
75 |
3 |
8 to 25 |
5/16 - 1 |
80 |
3-1/8 |
8 to 20 |
5/16 - 4/5 |
90 |
3-1/2 |
8 to 20 |
5/16- 4/5 |
100 |
4 |
8, 10, 12 |
5/16, 3/8, 1/2 |
| Delivery State Choice | Surface Condition |
|---|---|
| Forged | Black |
| Polished | |
| Hot Rolled | Black |
| Polished | |
| Bright | |
| Pickled | |
| Cold Drawn | Polished |
| Bright | |
| Note: 1. If you require different deliver state than the above listed, kindly confirm with us. 2. In case of any enquiry or order, please kindly let us know any extra requirement not indicated he |
|
Tolerances of Turned 316L Stainless Steel Round Bar (BS 970-3)
| Turned SS 316L round bar Tolerances | |
|---|---|
| 316L round bar Size, diameter | Permitted variation |
| mm | mm |
| ≧ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 120 > 120 ≦ 180 > 180 ≦ 250 > 250 ≦ 315 > 315 ≦ 400 > 400 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 + 0 to - 0.160 + 0 to - 0.185 + 0 to - 0.210 + 0 to - 0.230 + 0 to - 0.250 |
| Tolerances for Cold Drawn 316L Round Bar | ||
|---|---|---|
| Shape / Section | Size, diameter or width across flats | Permitted variation |
| mm | mm | |
| Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
| Flat (thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
| Flat (width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
| Square and hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |
The a276 316L round bars are produced through hot rolling, cold rolling, hot forging, rolling or machining methods. Each of these methods has different advantages for certain types of applications. There are also different finishes available for these round bars. They could either be black, bright polished, matt finish, BA finish, No 4 finish or rough turned. ASTM a276 type 316L is a chromium nickel molybdenum alloy with low carbon content. So the bars are used in oil and gas industries, paper industries, power plants, pipelines, mining, chemical industries, cement industries, shaft making and in machinery frames.
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 316L | 0.035 max | 2 max | 1.0 max | 0.045 max | 0.030 max | 16.0-18.0 | 2.0-3.0 | 10.0-14.0 | 68.89 min |
| GRADE | JIS | WERKSTOFF NR. | GOST | UNS | EN | BS | AFNOR |
| SS 316L | SUS 316L | 1.4404 / 1.4435 | 03Ch17N14M3 / 03Ch17N14M2 | S31603 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 | 316S11 / 316S13 | Z3CND17‐11‐02 / Z3CND18‐14‐03 |
| Size | Chucked true to OD | Chucked true to ID | |||||||
|---|---|---|---|---|---|---|---|---|---|
| OD, mm |
ID, mm |
Max. OD, mm |
Min. ID, mm |
Max. OD, in. |
Min. ID, in. |
Max. OD, mm |
Min. ID, mm |
Max. OD, in. |
Min. ID, in. |
32 |
20 |
31 |
21.9 |
1.220 | 0.862 | 30 |
21 |
1.185 | 0.827 |
32 |
16 |
31 |
18 |
1.220 | 0.709 | 30 |
17 |
1.181 | 0.669 |
36 |
25 |
35 |
26.9 |
1.378 | 1.059 | 34.1 |
26 |
1.343 | 1.024 |
36 |
20 |
35 |
22 |
1.378 | 0.866 | 34 |
21 |
1.339 | 0.827 |
36 |
16 |
35 |
18.1 |
1.378 | 0.713 | 33.9 |
17 |
1.335 | 0.669 |
40 |
28 |
39 |
29.9 |
1.535 | 1.177 | 38.1 |
29 |
1.500 | 1.142 |
40 |
25 |
39 |
27 |
1.535 | 1.063 | 38 |
26 |
1.496 | 1.024 |
40 |
20 |
39 |
22.1 |
1.535 | 0.870 | 37.9 |
21 |
1.492 | 0.827 |
45 |
32 |
44 |
33.9 |
1.732 | 1.335 | 43.1 |
33 |
1.697 | 1.299 |
45 |
28 |
44 |
30 |
1.732 | 1.181 | 43 |
29 |
1.693 | 1.142 |
45 |
20 |
44 |
22.2 |
1.732 | 0.874 | 42.8 |
21 |
1.685 | 0.827 |
50 |
36 |
49 |
38 |
1.929 | 1.496 | 48 |
37 |
1.890 | 1.457 |
50 |
32 |
49 |
34.1 |
1.929 | 1.343 | 47.9 |
33 |
1.886 | 1.299 |
50 |
25 |
49 |
27.2 |
1.929 | 1.071 | 47.8 |
26 |
1.882 | 1.024 |
56 |
40 |
55 |
42 |
2.165 | 1.654 | 54 |
41 |
2.126 | 1.614 |
56 |
36 |
55 |
38.1 |
2.165 | 1.500 | 53.9 |
37 |
2.122 | 1.457 |
56 |
28 |
55 |
30.3 |
2.165 | 1.193 | 53.7 |
29 |
2.114 | 1.142 |
63 |
50 |
62 |
51.9 |
2.441 | 2.043 | 61.1 |
51 |
2.406 | 2.008 |
63 |
45 |
62 |
47 |
2.441 | 1.850 | 61 |
46 |
2.402 | 1.811 |
63 |
40 |
62 |
42.2 |
2.441 | 1.661 | 60.8 |
41 |
2.394 | 1.614 |
63 |
36 |
62 |
38.3 |
2.441 | 1.508 | 60.7 |
37 |
2.390 | 1.457 |
63 |
32 |
62 |
34.4 |
2.441 | 1.354 | 60.6 |
33 |
2.386 | 1.299 |
71 |
56 |
69.9 |
58 |
2.752 | 2.283 | 68.9 |
57 |
2.713 | 2.244 |
71 |
45 |
69.9 |
47.3 |
2.752 | 1.862 | 68.6 |
46 |
2.701 | 1.811 |
71 |
40 |
69.9 |
42.4 |
2.752 | 1.669 | 68.5 |
41 |
2.697 | 1.614 |
71 |
36 |
69.9 |
38.5 |
2.752 | 1.516 | 68.4 |
37 |
2.693 | 1.457 |
75 |
60 |
73.8 |
62 |
2.906 | 2.441 | 72.8 |
61 |
2.866 | 2.402 |
75 |
50 |
73.8 |
52.2 |
2.906 | 2.055 | 72.6 |
51 |
2.858 | 2.008 |
75 |
40 |
73.8 |
42.5 |
2.906 | 1.673 | 72.3 |
41 |
2.846 | 1.614 |
80 |
63 |
78.8 |
65 |
3.102 | 2.559 | 77.8 |
64 |
3.063 | 2.520 |
80 |
50 |
78.8 |
52.4 |
3.102 | 2.053 | 77.4 |
51 |
3.047 | 2.008 |
80 |
45 |
78.8 |
47.5 |
3.102 | 1.870 | 77.3 |
46 |
3.043 | 1.811 |
80 |
40 |
78.8 |
42.6 |
3.102 | 1.677 | 77.2 |
41 |
3.039 | 1.614 |
85 |
67 |
83.7 |
69.1 |
3.295 | 2.720 | 82.6 |
68 |
3.252 | 2.677 |
85 |
55 |
83.7 |
57.4 |
3.295 | 2.260 | 82.3 |
56.0 |
3.240 | 2.205 |
85 |
45 |
83.7 |
47.6 |
3.295 | 1.874 | 82.1 |
46.0 |
3.232 | 1.811 |
90 |
71 |
88.6 |
73.1 |
3.488 | 2.878 | 87.6 |
72.1 |
3.449 | 2.839 |
90 |
63 |
88.6 |
65.3 |
3.488 | 2.571 | 87.3 |
64.0 |
3.437 | 2.520 |
90 |
56 |
88.6 |
58.5 |
3.488 | 2.303 | 87.1 |
57.0 |
3.429 | 2.244 |
90 |
50 |
88.6 |
52.6 |
3.488 | 2.071 | 87.0 |
51.0 |
3.425 | 2.008 |
95 |
75 |
93.5 |
77.3 |
3.681 | 3.041 | 92.4 |
76.2 |
3.641 | 2.997 |
95 |
67 |
93.5 |
69.3 |
3.681 | 2.728 | 92.2 |
68.0 |
3.630 | 2.677 |
95 |
50 |
93.5 |
52.7 |
3.681 | 2.075 | 91.8 |
51.0 |
3.614 | 2.008 |
100 |
80 |
98.5 |
82.3 |
3.878 | 3.240 | 97.4 |
81.2 |
3.835 | 3.197 |
100 |
71 |
98.5 |
73.4 |
3.878 | 2.890 | 97.2 |
72.1 |
3.827 | 2.839 |
100 |
63 |
98.5 |
65.5 |
3.878 | 2.579 | 97.0 |
64.0 |
3.819 | 2.520 |
100 |
56 |
98.5 |
58.7 |
3.878 | 2.311 | 96.8 |
57.0 |
3.811 | 2.244 |
106 |
80 |
104.4 |
82.5 |
4.110 | 3.248 | 103.1 |
81.2 |
4.059 | 3.197 |
106 |
71 |
104.4 |
73.5 |
4.110 | 2.894 | 103.0 |
72.1 |
4.055 | 2.839 |
106 |
63 |
104.4 |
65.7 |
4.110 | 2.587 | 102.7 |
64.0 |
4.043 | 2.520 |
106 |
56 |
104.4 |
58.9 |
4.110 | 2.319 | 102.5 |
57.0 |
4.035 | 2.244 |
112 |
90 |
110.3 |
92.5 |
4.343 | 3.642 | 109.2 |
91.4 |
4.299 | 3.598 |
112 |
80 |
110.3 |
82.6 |
4.343 | 3.252 | 108.9 |
81.2 |
4.287 | 3.197 |
112 |
71 |
110.3 |
73.7 |
4.343 | 2.902 | 108.7 |
72.1 |
4.280 | 2.839 |
112 |
63 |
110.3 |
65.8 |
4.343 | 2.591 | 108.5 |
64.0 |
4.272 | 2.520 |
118 |
90 |
116.2 |
92.7 |
4.575 | 3.650 | 114.9 |
91.4 |
4.524 | 3.598 |
118 |
80 |
116.2 |
82.8 |
4.575 | 3.260 | 114.6 |
81.2 |
4.512 | 3.197 |
118 |
71 |
116.2 |
73.8 |
4.575 | 2.906 | 114.5 |
72.1 |
4.508 | 2.839 |
118 |
63 |
116.2 |
66.0 |
4.575 | 2.598 | 114.2 |
64.0 |
4.496 | 2.520 |
125 |
100 |
123.1 |
102.7 |
4.846 | 4.043 | 121.9 |
101.5 |
4.799 | 3.996 |
125 |
90 |
123.1 |
92.8 |
4.846 | 3.654 | 121.7 |
91.4 |
4.791 | 3.598 |
125 |
80 |
123.1 |
82.9 |
4.846 | 3.264 | 121.4 |
81.2 |
4.780 | 3.197 |
125 |
71 |
123.1 |
74.0 |
4.846 | 2.913 | 121.3 |
72.1 |
4.772 | 2.839 |
132 |
106 |
130.0 |
108.8 |
5.118 | 4.283 | 128.8 |
107.6 |
5.071 | 4.236 |
132 |
90 |
130.0 |
93.0 |
5.118 | 3.661 | 128.4 |
91.4 |
5.055 | 3.598 |
132 |
80 |
130.0 |
83.1 |
5.118 | 3.272 | 128.1 |
81.2 |
5.043 | 3.197 |
132 |
71 |
130.0 |
74.2 |
5.118 | 2.921 | 121.2 |
72.1 |
5.035 | 2.839 |
140 |
112 |
137.9 |
115 |
5.429 | 4.528 | 136.6 |
113.7 |
5.378 | 4.476 |
140 |
100 |
137.9 |
103.1 |
5.429 | 4.059 | 136.3 |
101.5 |
5.366 | 3.996 |
140 |
90 |
137.9 |
93.2 |
5.429 | 3.669 | 136.1 |
91.4 |
5.358 | 3.598 |
140 |
80 |
137.9 |
83.3 |
5.429 | 3.280 | 135.8 |
81.2 |
5.346 | 3.197 |
150 |
125 |
147.7 |
128.1 |
5.815 | 5.043 | 146.5 |
126.9 |
5.768 | 4.996 |
150 |
106 |
147.7 |
109.3 |
5.815 | 4.303 | 146 |
107.6 |
5.748 | 4.236 |
150 |
95 |
147.7 |
98.4 |
5.815 | 3.874 | 145.7 |
96.4 |
5.736 | 3.795 |
150 |
80 |
147.7 |
83.6 |
5.815 | 3.291 | 145.3 |
81.2 |
5.720 | 3.197 |
160 |
132 |
157.6 |
135.3 |
6.205 | 5.327 | 156.3 |
134 |
6.154 | 5.276 |
160 |
122 |
157.6 |
125.4 |
6.205 | 4.937 | 156 |
123.8 |
6.142 | 4.874 |
160 |
112 |
157.6 |
115.5 |
6.205 | 4.547 | 155.8 |
113.7 |
6.134 | 4.476 |
160 |
90 |
157.6 |
94.0 |
6.205 | 3.701 | 155.2 |
91.4 |
6.110 | 3.598 |
170 |
140 |
167.4 |
143.5 |
6.591 | 5.650 | 166 |
142.1 |
6.535 | 5.594 |
170 |
130 |
167.4 |
133.6 |
6.591 | 5.260 | 165.8 |
132 |
6.528 | 5.197 |
170 |
128 |
167.4 |
131.6 |
6.591 | 5.181 | 165.7 |
130 |
6.524 | 5.118 |
170 |
118 |
167.4 |
121.7 |
6.591 | 4.791 | 165.5 |
119.8 |
6.516 | 4.717 |
170 |
106 |
167.4 |
109.8 |
6.591 | 4.323 | 165.2 |
107.6 |
6.504 | 4.236 |
170 |
100 |
167.4 |
103.9 |
6.591 | 4.091 | 165 |
101.5 |
6.496 | 3.996 |
180 |
150 |
177.3 |
153.6 |
6.980 | 6.047 | 176 |
152.3 |
6.929 | 5.996 |
180 |
140 |
177.3 |
143.7 |
6.980 | 5.657 | 175.7 |
142.1 |
6.917 | 5.594 |
180 |
125 |
177.3 |
128.9 |
6.980 | 5.075 | 175.3 |
126.9 |
6.902 | 4.996 |
180 |
100 |
177.3 |
104.1 |
6.980 | 4.098 | 174.7 |
101.5 |
6.878 | 3.996 |
190 |
160 |
187.1 |
163.8 |
7.366 | 6.449 | 185.7 |
162.4 |
7.311 | 6.394 |
190 |
150 |
187.1 |
153.9 |
7.366 | 6.059 | 185.5 |
152.3 |
7.303 | 5.996 |
190 |
132 |
187.1 |
136 |
7.366 | 5.354 | 185.1 |
134 |
7.287 | 5.276 |
200 |
170 |
197.0 |
173.9 |
7.756 | 6.846 | 195.6 |
172.6 |
7.701 | 6.795 |
200 |
160 |
197.0 |
164 |
7.756 | 6.457 | 195.4 |
162.4 |
7.693 | 6.394 |
200 |
150 |
197.0 |
154.1 |
7.756 | 6.067 | 195.2 |
152.3 |
7.685 | 5.996 |
200 |
140 |
197.0 |
144.2 |
7.756 | 5.677 | 194.9 |
142.1 |
7.673 | 5.594 |
212 |
170 |
208.8 |
174.2 |
8.220 | 6.858 | 207.2 |
172.6 |
8.157 | 6.795 |
212 |
150 |
208.8 |
154.4 |
8.220 | 6.079 | 206.6 |
152.3 |
8.133 | 5.997 |
212 |
130 |
208.8 |
134.6 |
8.220 | 5.299 | 206.2 |
132 |
8.118 | 5.197 |
224 |
180 |
220.6 |
184.4 |
8.685 | 7.260 | 218.9 |
182.7 |
8.618 | 7.193 |
224 |
140 |
220.6 |
144.8 |
8.685 | 5.701 | 217.9 |
142.1 |
8.579 | 5.594 |
236 |
190 |
232.4 |
194.6 |
9.150 | 7.661 | 230.7 |
192.9 |
9.083 | 7.594 |
236 |
150 |
232.4 |
155.0 |
9.150 | 6.102 | 229.7 |
152.3 |
9.043 | 5.996 |
250 |
200 |
246.2 |
204.9 |
9.693 | 8.067 | 244.3 |
203.0 |
9.618 | 7.992 |
| 275 | 200 | 268.9 | 205.4 | 10.587 | 8.087 | 266.5 | 203.0 | 10.492 | 7.992 |
| Round Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
| 3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
| 1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
| 5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
| 4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
| 3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
| 5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
| 7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
| 6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
| 1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
| 7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
| 5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
| 8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
| 9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
| 3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
| 10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
| 11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
| 7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
| 12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
| 1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
| 13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
| 14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
| 9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
| 15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
| 5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
| 16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
| 17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
| 11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
| 18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
| 3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
| 2-1/2" | 7.576 | 24.856 | ||||||
| 2-5/8" | 8.354 | 27.409 | ||||||
| 2-3/4" | 9.169 | 30.083 | ||||||
H&T |
Hardened and tempered. |
ANN |
Annealed |
PH |
Precipitation hardened. |
|
|
hex bar Size in Inches |
hex bar Wt per Ft |
hex bar Wt per 12′ |
|---|---|---|
3/16″ |
0.104 |
1.248 |
1/4″ |
0.180 |
2.160 |
5/16″ |
0.290 |
3.480 |
3/8″ |
0.625 |
4.920 |
7/16″ |
0.560 |
6.72 |
1/2″ |
0.740 |
8.880 |
9/16″ |
0.930 |
11.16 |
5/8″ |
1.150 |
13.80 |
11/16″ |
1.390 |
16.68 |
3/4″ |
1.660 |
19.92 |
13/16″ |
1.950 |
23.40 |
7/8″ |
2.300 |
27.60 |
15/16″ |
2.625 |
31.20 |
1″ |
2.90 |
34.80 |
1-1/16″ |
3.30 |
39.60 |
1-1/8″ |
3.700 |
44.40 |
1-1/4″ |
4.625 |
55.20 |
1-5/16″ |
5.100 |
61.20 |
1-3/8″ |
5.625 |
67.20 |
1-7/16″ |
6.100 |
73.20 |
1-1/2″ |
6.625 |
79.20 |
1-5/8″ |
7.800 |
93.60 |
1-3/4″ |
9.030 |
108.36 |
1-7/8″ |
10.400 |
124.80 |
2″ |
11.80 |
141.60 |
2-1/4″ |
14.920 |
179.04 |
2-3/8″ |
16.920 |
203.04 |
2-1/2″ |
18.42 |
221.04 |
3″ |
26.53 |
318.36 |
CD |
Cold drawn |
P |
Polished |
BD |
Bright drawn |
SRE |
Slit rolled edge |
CG |
Centreless ground |
HF |
Hot finished |
CF |
Cold finished |
HRAP |
Hot rolled annealed and pickled |
P&T |
Peeled and turned |
RT |
Rough turned/peeled |
ST |
Smooth turned |
PR |
Peeled and reeled |
| Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
| Cold Drawn and Polish | 3.00 – 75.00 | 1/8” – 3.00” | h8-h9-h10-h11, ASTM B408 |
| Cold Drawn and Ground | 10.00 – 75.00 | 5/6” – 2.50” | h8-h9-h10-h11 |
| Peeled and Polished | 40.00 – 150.00 | 1.50” – 6.00” | h11, ASTMA-484 h11-DIN 1013 |
| Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00” | h9-h10-h11, ASTM B408 |
Square bar – metric sizes and weights |
|||
|---|---|---|---|
Square bar Size |
KG’s per Metre |
Standard Length (metres) |
Colour Code |
10 x 10 |
0.81 |
6.0 |
Yellow |
12 x 12 |
1.16 |
6.0 |
Pink |
16 x 16 |
2.06 |
6.0 |
Grey |
20 x 20 |
3.22 |
6.0 |
Green |
25 x 25 |
5.03 |
6.0 |
Purple |
32 x 32 |
8.24 |
6.0 |
Orange |
40 x 40 |
12.8 |
6.0 |
Yellow |
50 x 50 |
20.12 |
6.0 |
Green |
Hot Rolled Stainless Steel Round Bar |
Cold Drawn Stainless Steel Round Bar |
Hot Forging Stainless Steel Round Bar |
|||||
OD(MM) |
OD(MM) |
OD(MM) |
OD(MM) |
OD(MM) |
OD(MM) |
OD(MM) |
OD(MM) |
φ8 |
φ45 |
φ140 |
φ2 |
φ27 |
φ85 |
φ50 |
φ150 |
φ10 |
φ48 |
φ145 |
φ3 |
φ28 |
φ90 |
φ55 |
φ155 |
φ12 |
φ50 |
φ150 |
φ4 |
φ30 |
φ95 |
φ60 |
φ160 |
φ14 |
φ55 |
φ155 |
φ5 |
φ32 |
φ100 |
φ65 |
φ165 |
φ15 |
φ60 |
φ160 |
φ6 |
φ34 |
φ70 |
φ170 |
|
φ16 |
φ65 |
φ165 |
φ7 |
φ35 |
φ75 |
φ180 |
|
φ18 |
φ70 |
φ170 |
φ8 |
φ36 |
φ80 |
φ185 |
|
φ20 |
φ75 |
φ180 |
φ9 |
φ38 |
φ85 |
φ190 |
|
φ22 |
φ80 |
φ185 |
φ10 |
φ40 |
φ90 |
φ195 |
|
φ24 |
φ85 |
φ190 |
φ11 |
φ42 |
φ95 |
φ200 |
|
φ25 |
φ90 |
φ195 |
φ12 |
φ45 |
φ100 |
φ210 |
|
φ27 |
φ95 |
φ200 |
φ14 |
φ46 |
φ105 |
φ220 |
|
φ28 |
φ100 |
φ210 |
φ15 |
φ48 |
φ110 |
φ230 |
|
φ30 |
φ105 |
φ220 |
φ16 |
φ50 |
φ115 |
φ240 |
|
φ32 |
φ110 |
φ230 |
φ18 |
φ55 |
φ120 |
φ250 |
|
φ35 |
φ115 |
φ240 |
φ19 |
φ60 |
φ125 |
φ260 |
|
φ36 |
φ120 |
φ250 |
φ20 |
φ65 |
φ130 |
φ270 |
|
φ38 |
φ125 |
φ260 |
φ22 |
φ70 |
φ135 |
φ280 |
|
φ40 |
φ130 |
φ270 |
φ24 |
φ75 |
φ140 |
φ300 |
|
φ42 |
φ135 |
φ280 |
φ25 |
φ80 |
φ145 |
||
|
|
