ASTM B444 is a specification that is intended for Inconel alloys, and in particular, the specification also covers Inconel 625. Most Inconel alloys, including the astm b444 Inconel 625 Tube tend to be resistant to corrosion, and are labeled as high performing alloys, because of their amazing properties. The chemistry of Inconel 625 ASTM B444 Seamless Pipe and Tube includes nickel, chromium, molybdenum as well as columbium in its alloy.
Under said specification, the materials are classified into two grades, grade 1 and grade 2, depending on their method of furnishing. This means that the astm b444 grade 1 Seamless Nickel Pipe is to be furnished in an annealed condition. On the other hand, if the method of furnishing is solution annealing, the material is classified as astm b444 grade 2 Nickel Alloy Seamless tube. As with several other ASTM specifications, these pipes and tubes are chemically analyzed and they are tested. The testing carried out on all Ni Alloy SB 444 Tubes are required that their properties match or conform to a specific set of properties at ambient temperatures.
Usually, the properties that are tested for include elongation as well as tensile and yield strength for the astm b444-16 tubing at room temperature. Other tests covered by the specification include a hydrostatic test, allowable fiber stress in addition to each ASTM B444 UNS N06625 Seamless Pipe being subjected to a specific type of nondestructive electric test.
| Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
|---|---|
| Size | 4 to 219mm W. T.: 0.5 to 20mm |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Length | Single Random, Double Random, Standard & Cut length Pipe |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
| Form | Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| Type | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW |
| End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
| Products | Country |
|---|---|
| ASTM B444 UNS NO6625 GRADE 1, AMS 5581 | United Arab Emirates (UAE), South Korea |
| Schedule 5 alloy 625 seamless pipe | Philippines, Canada, Romania |
| 1" Sch. 80S Seamless ASTM B444 UNS N06625 Grade 2 | Taiwan, Philippines, Los Alamos -Mexico, Russia |
| 26.7mm x 5.56mm Sch 160 UNS N06625 | Singapore, South Africa, Bahrain |
| 25NB Alloy 625 pipe SCH.40 | France, Qatar, Europe, Thailand |
| SCH 80 GRADE 1 UNS N06625 hydrostatic pipe | Indonesia, Philippines, Dammam -KSA, Belgium |
| Elements | Composition Limits, % |
|---|---|
| Inconel 625 | |
| Nickel | 58.0 min |
| Chromium |
|
| Columbium + Titanium |
|
| Carbon | 0.10 max |
| Manganese | 0.50 max |
| Silicon | 0.50 max |
| Phosphorous | 0.015 max |
| Sulfur | 0.015 max |
| Cobalt (if determined) | 1.0 max |
| Iron | 5.0 max |
| Aluminum | 0.40 max |
| Titanium | 0.40 max |
| Condition | Tensile Strength min, ksi (MPa) | Yield Strength (0.2 % offset), min, ksi (MPa) | Elongation in 2 inches or 50.8mm (or 4D)), min % |
|---|---|---|---|
Inconel 625 :
|
|
|
|
| Specified Outside Diameter, inches (mm) | Permissible Variation | |||||
|---|---|---|---|---|---|---|
| Outside Diameter inches (mm) | Inside Diameter | Wall Thickness | ||||
| + | - | + | - | + | - | |
| Under 3/32 (2.4) | 0.002(0.05) | 0 | 0 | 0.002(0.05) | 10 | 10 |
| 3/32 (2.4) to 3/16 (4.8), excl | 0.003(0.08) | 0 | 0 | 0.003(0.08) | 10 | 10 |
| 3/16 (4.8) to 1/2 (12.7), excl | 0.004(0.10) | 0 | 0 | 0.004(0.10) | 10 | 10 |
| 1/2 (12.7) to 1 1/4(31.8), incl | 0.005(0.13) | 0 | 0 | 0.005(0.13) | 10 | 10 |
| Length , ft (m) | Tube Size , inches (mm) | PermissibleVariation, inches (mm) | |
|---|---|---|---|
| Over | Under | ||
| Under 1 (0.30) | up to 1.250(31.8), incl | 1/32 (0.8) | 0 (0) |
| 1 (0.30) to 4 (1.22), incl | up to 1.250(31.8), incl | 1/16 (1.6) | 0 (0) |
| Over 4 (1.22) to 10 (3.0), incl | up to 1.250(31.8), incl | 3/32 (2.4) | 0 (0) |
| Over 10 (3.0) | up to 1.250(31.8), incl | 3/16 (4.8) | 0 (0) |
Tell us what you need — we'll get back within a few hours.
