ASME SB 705 N08825 class 1 Nickel Alloy Welded Tubing, Astm B705 Welded Pipe manufacturer in india guaranteed best price

ASTM B705 Welded Pipe

ASTM B705 Welded Pipe

ASTM B705 UNS N06625 Welded Pipe

ASTM B705 UNS N06625 Welded Pipe

SB 705 N08825 Pipes

SB 705 N08825 Pipes

 

Renowned Astm B705 Welded Pipe Suppliers in Mumbai in various shapes, See size chart here

Though seamless pipes tend to have an operational working pressure 20% higher than that of welded pipes, the preference for an ASTM B705 UNS N06625 Welded Pipe remains, largely due to the fact that they are a cost-effective solution. The manufacturing process for an ASTM B705 Inconel Incoloy Alloy Welded Pipe begins with the welding of a large sheet, with a longitudinal weld seam. The sheet is essentially a flat-rolled alloy and the process used to weld them is an automatic one.

The delivery of the cold worked, ASME SB705 Nickel Alloy Welded Pipe is in an annealed condition. Performing an annealing treatment on ASME SB 705 N08825 Pipes reestablishes the ductility of the material after the use of the cold working practice. Hence, annealing is known to permit the metal to be additionally processed without the ASTM B705 Welded Pipe (625/ 825) cracking. This is because when the material is annealed, additional mechanical stresses are released. Mechanical stresses on the ASTM B705 Tubing material are induced by processes like grinding and machining.

So the use of annealing treatment on the astm b705 class 1 Welded Pipe, simply is aids in the prevention of distortion, which may be caused due to the subsequent use of elevated temperatures for the heat treatment operations. Along with cold working and annealing, many manufacturers perform a non-destructive test on the welded ASTM B705 Inconel Pipe. The list of nondestructive tests that could be performed on the ASTM B705 Welded Pipe includes hydrostatic test, pneumatic test, eddy current test, ultrasonic test, leak test, and electric test

 

Specification List of ASTM B705 Welded Pipe
Standard ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB
Size 4 to 219mm W. T.: 0.5 to 20mm
Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Schedule SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Length Single Random, Double Random, Standard & Cut length Pipe
Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc
Form Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc.
Type Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW
End Plain End, Beveled End, Treaded Pipe, Screwed ends

 

Our recent supplied material
Product
Country
3 mm ASTM B705 UNS N06625 Pipe Cladded Singapore, South Africa, Bahrain
2" ASME SB 705 N08825 pipe, SCH 80 Russia, Dubai, Malaysia, Netherlands
26.7mm x 5.56mm Sch 160 UNS N06625 Canada, Singapore, Malaysia, Philippines

 

ASTM B705 UNS N06625 Welded Pipe Chemical Properties
Grade C Mn Si Fe S Cr2 Al-Ti Ni
625 min. 20.0 58.0
max. 0.10 0.50 0.50 5.0 0.015 23.0 0.40
Mechanical Properties of B705 UNS N06625 Pipe
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
625 Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5
Testing of SB 705 N08825 Pipes
  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test