Nonferrous materials, as the name suggests are devoid of ferrous, or what in lay terms is referred to as iron in their chemical composition. While ferrous is a very important element used in the alloying of several metal grades, it makes said metal grades very susceptible to atmospheric corrosion, especially if these alloys lack chromium or nickel to combat this issue. And so, the astm f468 bolts are made from alloys that either are completely free of iron, or they may have iron in very insignificant quantities. For instance, one of the more common ASTM F468 Material is Monel 400.
Apart from monel 400, the fasteners under this specification also include alloys like astm f468 uns n10276 and Inconel 625, all of which are alloys that contain nickel and chromium as their primary alloying material. Since all three alloys including the astm f468 uns n06625 contain insignificant content of iron in their alloy, the most important property they have to offer is resistance to corrosion. In particular, the rate of corrosion tends to see leaps if the temperature is elevated. However, it is not only the temperature and the environmental condition that accelerates the rate of corrosion, but also the chemical composition of the fastener.
Because the content of chromium and nickel in all three alloys including the astm f468 alloy400 is very high they have better mechanical properties. Not only can they withstand elevated temperatures, but the astm f468 standard bolts also resist atmospheric corrosion or oxidation corrosion, which is one of the most commonly occurring types of corrosion. Furthermore, the rate of corrosion in various alkali, caustic solutions, acid, and neutral solutions for the astm f468 steel bolts is relatively lower.
before buy from india see Comparision of ASTM F468 Bolts price with ASTM A453 Grade 660 Stud Bolts price list
Standards |
Designation |
|---|---|
| ASTM | F468 |
| Thread Requirements of Astm F468 Bolts | UNC & UNF, ASME B1.1, Class 2A (Fastenal will inspect and accept parts with a 1A no-go gauge) |
| Manufacturing Process | Cold Heading, Wire Drawing, Heat Treatment, Insert tapping, Inspection, Surface Plating, Packing |
| Delivery time | custom product will according to special requirement, Regular product is about 7-15 days |
| ASTM F468M Bolts Coatings | Cadmium, Black Oxide, Teflon, Galvanized, Zinc, Xylan, Others Upon Request |
| Head | Square, Hex, Hex flange, Round, T-head, Flat & Triangular etc |
| ASTM F468M Bolts Neck type | Square, Hex, Oval, Triangular & Knurled etc |
Dimensions |
ASME B18.3, B18.2.1 |
Melt Origin |
South America/East Europe/Japan/Korea |
Product Origin |
Made in India |
Threads Configuration |
B1.13M 6h Metric Coarse Threads and ASME B1.1 2A/3A Inch Unified Threads |
Certification |
Dual Certified As per ASME & ASTM Codes |
Additional Certifications |
Merkblatt AD 2000 W2 Certified, PED 97/23/EC Certified |
Mandatory Requirements |
Free from Radioactive & Mercury Contamination |
Additional Requirements |
NACE MR0175 / MR0103 /ISO 15156 Compliance |
| Samples | Yes |
| Payment Terms | Western Union, T/T, Paypal, Trade Assurance 30% deposit & balance before shipping or L/C |
ASTM F468 Bolts |
Price |
ASTM F468 Heavy Hex Bolts |
US$ 0.01-US$ 0.05 / Piece |
ASTM F468 Stud Bolts |
US$ 1.50-US$ 2.00 / Piece |
ASTM F468 All Size Material Hexagon Thin Nuts |
US$ 0.10-US$ 0.30 / Piece |
High Tensile Fastener ASTM F468 U Bolts |
US $0.01-$0.10 / Piece / Piece |
ASTM F468 Hex Head Bolt |
US$ 1.50-US$ 2.00 / Piece |
Supplier ASTM F468 Hexagonal bolt |
US$ 0.10-US$ 0.30 / Piece |
ASTM F468 hexagon nut |
US$ 0.15-US$ 0.50 / Pieces |
ASTM F468 Shoulder Bolt |
US$ 0.10-US$ 1.20 / Piece |
F568 Hanger Bolt |
US$ 0.05-US$ 0.10 / Piece |
| Alloy | Condition |
|---|---|
| All Alloys in Copper | As formed or stress relieved at manufacturer's option |
| Nickel Alloys: | |
| Monel 400 and Monel 405 | As formed or stress relieved at manufacturer's option |
| Monel K500 | Solution annealed and aged |
| Inconel 625 | Annealed |
| Aluminum Alloys: | |
| 2024-T4 | Solution treated and naturally aged |
| 6061-T6 | Solution treated and artificially aged |
| 6262-T73 | Solution treated and stablilized |
| Titanium | As Formed |
Stainless Steel :
AISI 302, 304, 304L,316, 316L, 310, 317, 317L, 321, 347, 410, 420,904L etc.
Duplex & Super Duplex Steel :
ASTM / ASME A815 UNS No. S31803, UNS No. S 32205, UNS No. S 31254, UNS No. S 31550, UNS No. S 32750, and UNS No. S 32760
Carbon Steel :
ASTM A307
Alloy Steel :
ASTM / ASME A/SA 193 / 194 B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M
Nickel Alloy :
ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472 UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
BOLT DIA |
Torque FT-LBS |
||
30% Initial Torque |
70% Torque |
100% Final Torque |
|
1/2 |
16 |
36 |
52 |
9/16 |
23 |
53 |
75 |
5/8 |
31 |
73 |
104 |
3/4 |
55 |
129 |
184 |
7/8 |
71 |
166 |
237 |
1 |
107 |
249 |
356 |
1.1/8 |
127 |
297 |
424 |
1.1/4 |
179 |
417 |
596 |
1.3/8 |
186 |
435 |
622 |
1.1/2 |
246 |
574 |
821 |
1.9/16 |
168 |
392 |
560 |
1.5/8 |
191 |
445 |
636 |
1.3/4 |
240 |
561 |
801 |
1.7/8 |
298 |
696 |
994 |
2 |
366 |
853 |
1219 |
2.1/4 |
529 |
1234 |
1762 |
2.1/2 |
733 |
1709 |
2442 |
2.3/4 |
986 |
2300 |
3285 |
3 |
1289 |
3008 |
4297 |
Diameter (D) |
Body Diameter (D) |
Across the Flats (F) |
Across the Corners © |
Head Height (H) |
Thread Lengths (T) |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
MAX |
MIN |
MAX |
MIN |
MAX |
MIN |
MAX |
MIN |
< 6” |
> 6” |
|
1/2 |
0.515 |
0.482 |
0.875 |
0.85 |
1.01 |
0.969 |
0.364 |
0.302 |
1.25 |
1.5 |
5/8 |
0.642 |
0.605 |
1.062 |
1.031 |
1.227 |
1.175 |
0.444 |
0.378 |
1.5 |
1.75 |
3/4 |
0.768 |
0.729 |
1.25 |
1.212 |
1.443 |
1.383 |
0.524 |
0.455 |
1.75 |
2 |
7/8 |
0.895 |
0.852 |
1.438 |
1.394 |
1.66 |
1.589 |
0.604 |
0.531 |
2 |
2.25 |
1 |
1.022 |
0.976 |
1.625 |
1.575 |
1.876 |
1.796 |
0.7 |
0.591 |
2.25 |
2.5 |
1 1/8 |
1.149 |
1.098 |
1.812 |
1.756 |
2.093 |
2.002 |
0.78 |
0.658 |
2.5 |
2.75 |
1 1/4 |
1.277 |
1.223 |
2 |
1.938 |
2.309 |
2.209 |
0.876 |
0.749 |
2.75 |
3 |
1 3/8 |
1.404 |
1.345 |
2.188 |
2.119 |
2.526 |
2.416 |
0.94 |
0.81 |
3 |
3.25 |
1 1/2 |
1.531 |
1.47 |
2.375 |
2.3 |
2.742 |
2.622 |
1.036 |
0.902 |
3.25 |
3.5 |
1 3/4 |
1.785 |
1.716 |
2.75 |
2.662 |
3.175 |
3.035 |
1.196 |
1.054 |
3.75 |
4 |
2 |
2.039 |
1.964 |
3.125 |
3.025 |
3.608 |
3.449 |
1.388 |
1.175 |
4.25 |
4.5 |
2 1/4 |
2.305 |
2.214 |
3.5 |
3.388 |
4.041 |
3.862 |
1.548 |
1.327 |
4.75 |
5 |
2 1/2 |
2.559 |
2.461 |
3.875 |
3.75 |
4.474 |
4.275 |
1.708 |
1.479 |
5.25 |
5.5 |
2 3/4 |
2.827 |
2.711 |
4.25 |
4.112 |
4.907 |
4.688 |
1.869 |
1.632 |
5.75 |
6 |
3 |
3.081 |
2.961 |
4.625 |
4.475 |
5.34 |
5.102 |
2.06 |
1.815 |
6.25 |
6. |
NOMINAL SIZE (D) |
BODY DIAMETER |
HEAD THICKNESS |
ACROSS THE FLATS |
ACROSS BOLTS CORNERS |
||||
|---|---|---|---|---|---|---|---|---|
D (MAX) |
D (MIN) |
H (MAX) |
H (MIN) |
F (MAX) |
F (MIN) |
C (MAX) |
C (MIN) |
|
m10 |
10.00 |
9.78 |
6.63 |
6.17 |
17.00 |
15.73 |
18.48 |
17.77 |
m12 |
12.00 |
11.73 |
7.76 |
4.24 |
19.00 |
17.73 |
20.78 |
20.03 |
m14 |
14.00 |
13.73 |
9.09 |
8.51 |
22.00 |
20.67 |
24.25 |
23.35 |
m16 |
16.00 |
15.73 |
10.32 |
9.68 |
24.00 |
23.67 |
27.71 |
26.75 |
m20 |
20.00 |
19.67 |
12.88 |
12.12 |
30.00 |
29.16 |
34.64 |
32.95 |
m24 |
24.00 |
23.67 |
15.44 |
14.56 |
36.00 |
35.00 |
41.57 |
39.55 |
m30 |
30.00 |
29.67 |
19.48 |
17.92 |
46.00 |
45.00 |
53.12 |
50.85 |
m36 |
36.00 |
35.61 |
23.38 |
21.63 |
55.00 |
53.80 |
63.51 |
60.79 |
m42 |
42.00 |
41.38 |
26.97 |
25.03 |
65.00 |
62.90 |
75.06 |
71.71 |
m48 |
48.00 |
47.38 |
31.07 |
28.93 |
75.00 |
72.60 |
86.60 |
82.76 |
m56 |
56.00 |
55.26 |
36.2 |
33.80 |
85.00 |
82.20 |
98.15 |
93.71 |
m64 |
64.00 |
63.26 |
41.32 |
38.68 |
95.00 |
91.80 |
109.70 |
104.65 |
m72 |
72.00 |
71.26 |
46.45 |
43.55 |
105.00 |
101.40 |
121.24 |
115.60 |
m80 |
80.00 |
79.26 |
51.58 |
48.42 |
115.00 |
111.00 |
132.72 |
126.54 |
m90 |
90.00 |
89.13 |
57.74 |
54.26 |
130.00 |
125.50 |
150.11 |
143.07 |
m100 |
90.00 |
99.13 |
63.9 |
60.10 |
145.00 |
140.00 |
167.43 |
159.60 |
| Nominal Size, inch. | Coarse Threads - UNC | Fine Threads - UNF | 8 Thread Series - 8UN | |||
|---|---|---|---|---|---|---|
| Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | |
| 1/4 | 20 | 0.0318 | 28 | 0.0364 | -- | -- |
| 5/16 | 18 | 0.0524 | 24 | 0.0580 | -- | -- |
| 3/18 | 16 | 0.0775 | 24 | 0.0878 | -- | -- |
| 7/16 | 14 | 0.1063 | 20 | 0.1187 | ||
| 1/2 | 13 | 0.1419 | 20 | 0.1599 | ||
| 9/16 | 12 | 0.1820 | 18 | 0.2030 | ||
| 5/8 | 11 | 0.2260 | 18 | 0.2560 | ||
| 3/4 | 10 | 0.3340 | 16 | 0.3730 | ||
| 7/8 | 9 | 0.4620 | 14 | 0.5090 | ||
| 1 | 8 | 0.6060 | 12 | 0.6630 | ||
| 1 1/8 | 7 | 0.7630 | 12 | 0.8560 | 8 | 0.790 |
| 1 1/4 | 7 | 0.9690 | 12 | 1.0730 | 8 | 1.000 |
| 1 3/8 | 6 | 1.1550 | 12 | 1.3150 | 8 | 1.233 |
| 1 1/2 | 6 | 1.4050 | 12 | 1.5810 | 8 | 1.492 |
| Bolt Length, inch | Thread Length |
|---|---|
| 2.00 and less | within 2 threads of the head |
| Over 2.00 to 6.00, incl. | 2.00 inch min + 2 threads |
| Over 6.00 | 3.00 inc min + 2 threads |
| Alloy | Test Method |
|---|---|
| Copper | E52, E54, E62, E75, E478 |
| Aluminum | E34, E101, E227 |
| Nickel | E38, E76, E354 |
| Titanium | E120, E1409 |
No. |
Description |
|---|---|
DIN 84 |
Slotted Cheese Head Machine Screws |
DIN 85 |
Slotted Pan Head Machine Screws |
DIN 94 |
Cotter Pin |
DIN 125A |
Flat Washer (without Chamfer) |
DIN 125B |
Flat Washer (with Chamfer) |
DIN 127B |
Split Lock Washer |
DIN 137B |
Spring Wave Washer |
DIN 315 |
Wing Nut |
DIN 439B |
Machine Screws Hex Nut, Finished Hex Jam Nut |
DIN 911 |
Long Arm Hex Key |
DIN 912 |
Hex Socket Head Cap Screws |
DIN 916 |
Hex Socket Set Screws |
DIN 931 |
Hex Head Cap Screws Partially Threaded |
DIN 933 |
Hex Head Cap Screws Fully Threaded |
DIN 934 |
Finished Hex Nut |
DIN 939 |
Double End Stud |
DIN 960 |
Hex Head Cap Screws Partially Threaded |
DIN 961 |
Hex Head Cap Screws Fully Threaded |
DIN 963 |
Slotted Flat Head Machine Screws |
DIN 964 |
Slotted Oval Head Machine Screws |
DIN 965 |
Phillips Flat Head Machine Screws |
DIN 966 |
Phillips Oval Head Machine Screws |
DIN 975 |
Threaded Rod |
DIN 980V |
Hex Steel Prevailing Torque Lock Nut |
DIN 985 |
Hex Nylon Insert Lock Nut |
DIN 6334 |
Rod Coupling Nut |
DIN 6797A |
External Tooth Lock Washer |
DIN 6797J |
Internal Tooth Lock Washer |
DIN 6912 |
Hex Low Socket Head Cap Screws |
DIN 6921 |
Hex Flange Head Screws |
DIN 6923 |
Hex Flange Nut |
ISO 7379 |
Hex Socket Head Shoulder Screws |
ISO 7380 |
Hex Button Socket Head Cap Screws |
DIN 7985 |
Phillips Pan Head Machine Screws |
DIN 7991 |
Hex Flat Socket Head Cap Screws |
Metric |
Closest Inch |
|---|---|
M1.4-0.3 |
0-80 (Larger) |
M2-0.4 |
1-64 (Smaller) |
M2.5-0.45 |
3-56 (Larger) |
M3-0.5 |
4-48 (Smaller) |
M3.5-0.6 |
6-40 (Same) |
M4-0.7 |
8-36 (Larger) |
M5-0.8 |
10-32 (Smaller) |
M6-1.0 |
1/4-28 (Larger) |
M7-1.0 |
1/4-28 (Smaller) |
M8-1.25 |
5/16-18 (Smaller) |
M10-1.5 |
3/8-16 (Smaller) |
M12-1.75 |
1/2-13 (Larger) |
M14-2.0 |
9/16-12 (Larger) |
M16-2.0 |
5/8-11 (Smaller) |
M18-2.5 |
3/4-10 (Larger) |
M20-2.5 |
3/4-10 (Smaller) |
M22-2.5 |
7/8-9 (Larger) |
M24-3.0 |
1-8 (Larger) |
M30-3.5 |
1 1/8-7 (Smaller) |
M36-4.0 |
1 3/8-6 (Smaller) |
| ASME B18.1.1 | Small Solid Rivets | ASME B18.8.1 | Clevis Pins and Cotter Pins |
|---|---|---|---|
| ASME B18.1.2 | Large Rivets | ASME B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
| ASME B18.2.1 | Square and Hex Bolts and Screws | ASME B18.9 | Plow Bolts |
| ASME B18.2.2 | Square and Hex Nuts | ASME B18.10 | Track Bolts and Nuts |
| ASME B18.2.6 | Fasteners for use in Structural Applications | ASME B18.11 | Miniature Screws |
| ASME B18.3 | Socket Cap, Shoulder and Set Screws | ASME B18.13 | Screws and Washer Assemblies (Sems) |
| ASME B18.5 | Round Head Bolts | ASME B18.15 | Forged Eyebolts |
| ASME B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | ASME B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
| ASME B18.6.3 | Machine Screws and Machine Screws Nuts | ASME B18.21.1 | Lock Washers |
| ASME B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | ASME B18.22.1 | Plain Washers |
| ASME B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | ASME B18.23.1 | Beveled Washers |
Copper and Copper Base Alloys
| Composition, % Copper and Copper Base Alloys |
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS Designation | Alloy | General Name | Aluminum | Copper, min | Iron, max | Manganese, max | Nickel, max | Phosphorus | Silicon | Zinc, maxA | Lead, max | Tin | Arsenic, max |
| C11000 | 110 | ETP Copper | -- | 99.9 | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| C26000 | 260 | Brass | -- | 68.5 - 71.5 | 0.05 | -- | -- | -- | -- | balance | 0.07 | -- | -- |
| C27000 | 270 | Brass | -- | 63.0 - 68.5 | 0.07 | -- | -- | -- | -- | balance | 0.10 | -- | -- |
| C46200 | 462 | Naval Brass | -- | 62.0 - 65.0 | 0.10 | -- | -- | -- | -- | balance | 0.20 | 0.50 - 1.00 | -- |
| C46400 | 464 | Naval Brass | -- | 59.0 - 62.0 | 0.10 | -- | -- | -- | -- | balance | 0.20 | 0.50 - 1.00 | -- |
| C51000 | 510 | Phosphor Bronze | -- | balanceA | 0.10 | -- | -- | 0.03 - 0.35 | -- | 0.30 | 0.05 | 4.20 - 5.80 | -- |
| C61300 | 613 | Aluminum Bronze | 6.0 - 7.5 | B | 2.0 - 3.0 | 0.10 | 0.15C | 0.015 | 0.10 | 0.05 | 0.01 | 0.20 - 0.50 | -- |
| C61400 | 614 | Aluminum Bronze | 6.0 - 8.0 | 88.0D | 1.5 - 3.5 | 1.00 | -- | -- | -- | -- | -- | -- | -- |
| C63000 | 630 | Aluminum Bronze | 9.0 - 11.0 | 78.0D | 2.0 - 4.0 | 1.50 | 4.0 - 5.5 | -- | 0.25 max | -- | -- | 0.20 max | -- |
| C64200 | 642 | Aluminum Silicon Bronze | 6.3 - 7.6 | 88.65D | 0.30 | 0.10 | 0.25 | -- | 1.50 - 2.20E | 0.50 | 0.05 | 0.20 max | 0.15 |
| C65100 | 651 | Silicon Bronze | -- | 96.0D | 0.80 | 0.70 | -- | -- | 0.8 - 2.0 | 1.50 | 0.05 | -- | -- |
| C65500 | 655 | Silicon Bronze | -- | 94.8D | 0.80 | 1.50 | 0.60 | -- | 2.8 - 3.8 | 1.50 | 0.05 | -- | -- |
| C66100 | 661 | Silicon Bronze | 0.25 max | 94.0D | 0.25 | 1.50 | -- | -- | 2.8 - 3.5 | 1.50 | 0.20 - 0.80 | -- | -- |
| C67500 | 675 | Manganese Bronze | -- | 57.0 - 60.0 | 0.8 - 2.0 | 0.05 - 0.50 | -- | -- | -- | balance | 0.20 | 0.50 - 1.50 | -- |
| C71000 | 710 | Cupro Nickel | -- | 74.0D | 0.60 | 1.00 | 19.0 - 23.0C | -- | 1.00 | 0.05 | -- | -- | |
| C71500 | 715 | Cupro Nickel | -- | 65.0D | 0.40 - 0.70 | 1.00 | 29.0 - 33.0C | -- | -- | 1.00 | 0.05 | -- | -- |
Nickel and Nickel base Alloys
| Composition, % Nickel and Nickel Base Alloys |
|||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS Designation | Alloy | General Name | Aluminum | Carbon, max | Chromium | CopperA | Iron, max | Manganese, max | NickelA | Phosphorus, max | Silicon, max | Titanium | Cobalt, max | Molybdenum | Sulfur, max | Vanadium | Tungsten |
| N10001 | 335 | Ni-Mo | -- | 0.05 | 1.00 max | -- | 4.00 - 6.00 | 1.00 | balance | 0.025 | 1.00 | -- | 2.50 | 26.0 - 30.0 | 0.030 | 0.20 - 0.40 | -- |
| N10276 | 276 | Ni-Mo-Cr | -- | 0.02 | 14.5 - 16.5 | -- | 4.00 - 7.00 | 1.00 | balance | 0.040 | 0.08 | -- | 2.50 | 15.0 - 17.0 | 0.030 | 0.35 max | 3.0 - 4.5 |
| N04400 | 400 | Ni-Cu Class A | -- | 0.30 | -- | balance | 2.50 | 2.00 | 63.0 - 70.0 | -- | 0.50 | -- | B | -- | 0.024 | -- | -- |
| N04405 | 405 | Ni-Cu Class B | -- | 0.30 | -- | balance | 2.50 | 2.00 | 63.0 - 70.0 | -- | 0.50 | -- | B | -- | 0.025 - 0.060 | -- | -- |
| N05500 | 500 | Ni-Cu-Al | 2.30 - 3.15 | 0.25 | -- | balance | 2.00 | 1.50 | 63.0 - 70.0 | 0.015 | 0.50 | 0.35 - 0.85 | B | -- | 0.010 | -- | -- |
| N06059 | 59 | Ni-Cu-Mo | 0.10 - 0.40 | 0.010 max | 22.0 - 24.0 | 0.50 max | 1.50 | 0.50 | balance | 0.015 | 0.10 | -- | 0.30 | 15.0 - 16.5 | 0.010 | -- | -- |
| N06625 | 625C | Ni-Cr-No-Cb | 0.40 max | 0.010 max | 20.0 - 23.0 | -- | 5.00 | 0.50 | 58.0 min | 0.040 | 0.50 | 0.40 max | 1.00 | 8.0 - 10.0 | 0.015 | -- | 3.2 - 4.2 |
| N06686 | 686 | Ni-Cr-Mo-W | -- | 0.010 max | 19.0 - 23.0 | -- | 5.00 | 0.50 | balance | -- | 0.08 | 0.02 - 0.25 | -- | 15.0 - 17.0 | 0.02 | -- | 3.0 - 4.4 |
Aluminum Base Alloys
| Composition, % Aluminum Base Alloys |
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS Designation | Alloy | General Name | AluminumB | Chromium | Copper | Iron, max | Manganese, max | Silicon, max | Titanium, max | Zinc, max | Magnesium | Other Elements, max | |
| Each | Total | ||||||||||||
| A92024 | 2024 | Aluminum 2024 | balance | 0.10 max | 3.80 - 4.90 | 0.50 | 0.30 - 0.90 | 0.50 | 0.15C | 0.25 | 1.20 - 1.80 | 0.05 | 0.15 |
| A96061 | 6061 | Aluminum 6061 | balance | 0.04 - 0.35 | 0.15- 0.40 | 0.70 | 0.15 | 0.40 - 0.80 | 0.15 | 0.25 | 0.80 - 1.20 | 0.05 | 0.15 |
| A97075 | 7075 | Aluminum 7075 | balance | 0.18 - 0.35 | 1.20 - 2.00 | 0.50 | 0.30 | 0.40 | 0.20D | 5.10 - 6.10 | 2.10 - 2.90 | 0.05 | 0.15 |
Titanium and Titanium Base Alloys
| Composition, % Titanium and Titanium Base Alloys |
|||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS Designation | Alloy | General Name | Aluminum | Carbon | Iron | Titanium | Hydrogen | Nitrogen | Oxygen | Palladium | Vanadium | Chromium | Molybdenum | Zirconium | Tin | Silicon | ResidualsB | ||
| Each | Total | ||||||||||||||||||
| R50250 | 1 | Titanium Grade 1 | -- | 0.10 | 0.20 | balance | 0.0125 | 0.05 | 0.18 | -- | -- | -- | -- | -- | -- | -- | -- | 0.10 | 0.40 |
| R50400 | 2 | Titanium Grade 2 | -- | 0.10 | 0.30 | balance | 0.0125 | 0.05 | 0.25 | -- | -- | -- | -- | -- | -- | -- | -- | 0.10 | 0.40 |
| R50700 | 4 | Titanium Grade 4 | -- | 0.10 | 0.50 | balance | 0.0125 | 0.07 | 0.40 | -- | -- | -- | -- | -- | -- | -- | -- | 0.10 | 0.40 |
| R56400 | 5C | Titanium grade 5C | 5.50 - 6.75 | 0.10 | 0.40 | balance | 0.0125 | 0.05 | 0.20 | 3.50 - 4.50 | 0.10 | 0.40 | |||||||
| R54601 | 23 | Titanium Ti-5Al-4V ELI | 5.50 - 6.50 | 0.08 | 0.25 | balance | 0.0125 | 0.05 | 0.13 | -- | 3.50 - 4.50 | -- | -- | -- | -- | -- | -- | 0.10 | 0.40 |
| R52400 | 7 | Titanium Grade 7 | -- | 0.10 | 0.30 | balance | 0.0125 | 0.05 | 0.25 | 0.12 - 0.25 | -- | -- | -- | -- | -- | -- | -- | 0.10 | 0.40 |
| R58640 | 19 | Titanium Ti-28-6-44 | 3.00 - 4.00 | 0.05 | 0.30 | balance | 0.0200 | 0.03 | 0.12 | 0.10D | 7.50 - 8.50 | 5.50 - 6.50 | 3.50 - 4.50 | 3.50 - 4.50 | -- | -- | 0.10D | 0.15 | 0.40 |
| R55111 | 32 | Titanium Ti-5-1-1-1 | 4.50 - 5.50 | 0.08 | 0.25 | balance | 0.0125 | 0.03 | 0.11 | -- | 0.60 - 1.40 | -- | 0.60 - 1.20 | 0.60 - 1.40 | 0.60 - 1.40 | 0.60 - 1.40 | -- | 0.10 | 0.40 |
| Alloy | Mechanical Property Marking | Nominal Thread Diameter, inch | HardnessA | Full Size Tests B | Machined Specimen Tests | |||
|---|---|---|---|---|---|---|---|---|
| Tensile Strength, min, ksi | Yield Strength, min, ksiC | Tensile Strength, min, ksi | Yield Strength, min, ksiC | Elongation in 4D, min %D | ||||
| Copper | ||||||||
| Cu 110 | F 468A | all | 65 - 90 HRF | 30 - 50 | 10 | 30 | 10 | 15 |
| Cu 260 | F 468AB | all | 55 - 80 HRF | 60 - 90 | 50 | 55 | 50 | 35 |
| Cu 270 | F 468B | all | 55 - 80 HRF | 60 - 90 | 50 | 55 | 50 | 35 |
| Cu 462 | F 468C | all | 65 - 90 HRF | 50 - 80 | 25 | 50 | 25 | 20 |
| Cu 464 | F 468D | all | 55 - 75 HRF | 50 - 80 | 15 | 50 | 15 | 25 |
| Cu 510 | F 468E | all | 60 - 95 HRF | 60 - 90 | 35 | 55 | 30 | 15 |
| Cu 613 | F 468F | 0.250 - 0.500 0.625 - 1.500 |
70 - 95 HRF 70 - 95 HRF |
80 - 110 75 - 105 |
50 45 |
80 75 |
50 45 |
30 30 |
| Cu 614 | F 468G | all | 70 - 95 HRF | 75 - 110 | 35 | 75 | 35 | 30 |
| Cu 630 | F 468H | all | 85 - 100 HRF | 100 - 130 | 50 | 100 | 50 | 5 |
| Cu 642 | F 468J | all | 75 - 95 HRF | 75 - 110 | 35 | 75 | 35 | 10 |
| Cu 651 | F 468K | 0.250 - 0.750 0.875 - 1.500 |
75 - 95 HRF 70 - 95 HRF |
70 - 100 55 - 90 |
55 40 |
70 54 |
53 38 |
8 8 |
| Cu 655 | F 468L | all | 60 - 80 HRF | 50 - 80 | 20 | 50 | 15 | 20 |
| Cu 661 | F 468M | all | 75 - 95 HRF | 70 - 100 | 35 | 70 | 35 | 15 |
| Cu 675 | F 468N | all | 60 - 90 HRF | 55-85 | 25 | 55 | 25 | 20 |
| Cu 710 | F 468P | all | 50 - 85 HRF | 45-75 | 15 | 45 | 15 | 40 |
| Cu 715 | F 468R | all | 60 - 95 HRF | 55 - 85 | 20 | 55 | 20 | 45 |
| Nickel Alloys | ||||||||
| Ni 59 Grade 1 | F468FN | all | 21 - 45 HRC | 120 165 | 85 | 120 | 85 | 20 |
| Ni 59 Grade 2 | F468GN | all | 23 - 47 HRC | 135 - 185 | 125 | 135 | 125 | 20 |
| Ni 59 Grade 3 | F468HN | all | 25 - 49 HRC | 160 - 200 | 150 | 160 | 150 | 20 |
| Ni 59 Grade 4 | F468JN | all | 80 HRC - 25 HRC | 100 - 145 | 45 | 100 | 45 | 25 |
| NI 335 | F 468S | all | 20 - 32 HRC | 115 - 145 | 45 | 115 | 45 | 35 |
| Ni 276 | F 468T | all | 20 - 32 HRC | 110 - 140 | 45 | 110 | 45 | 25 |
| Ni 400 | F 468U | 0.250 - 0.750 0.875 - 1.500 |
75 HRC - 25 HRC 60 HRC - 25 HRC |
80 - 130 70 - 130 |
40 30 |
80 70 |
40 30 |
20 20 |
| Ni 400 HFE | F 468HF | all | 60 - 95 HRB | 70 - 120 | 30 | 70 | 30 | 20 |
| Ni 405 | F 468V | all | 60 HRB - 20 HRC | 70 - 125 | 30 | 70 | 30 | 20 |
| Ni 500 | F 468W | 0.250 - 0.875 | 24 - 37 HRC | 130 - 180 | 90 | 130 | 90 | 20 |
| Ni 500 | F 468W | 1.000 - 1.500 | 24 - 37 HRC | 130 - 180 | 85 | 130 | 85 | 20 |
| Ni 625 | F 468AC | all | 85 HRB - 35 HRC | 120 | 60 | 120 | 60 | 30 |
| Ni 686 Grade 1 | F 468BN | all | 21 - 45 HRC | 120 - 165 | 85 | 120 | 85 | 20 |
| Ni 686 Grade 2 | F 467CN | all | 23 - 47 HRC | 135 - 185 | 125 | 135 | 125 | 20 |
| Ni 686 Grade 3 | F 468DN | all | 25 - 49 HRC | 160 - 200 | 150 | 160 | 150 | 20 |
| Ni 686 Grade 4 | F 468EN | all | 65 HRB - 25 HRC | 100 - 145 | 45 | 100 | 45 | 25 |
| Aluminum | ||||||||
| Al 2024 - T4B | F 468X | all | 70 HRB | 100 - 145 | 45 | 100 | 45 | 25 |
| Al 6061 - T6 | F 468Y | all | 40 HRB | 100 - 145 | 45 | 100 | 45 | 25 |
| Al 6262 - T9 | F 468Z | all | 60 HRB | 100 - 145 | 45 | 100 | 45 | 25 |
| Titanium Alloys | ||||||||
| Ti 1 | F 468AT | all | 140 - 160 HV | 35 - 70 | 30 | 35 | 25 | 24 |
| Ti 2 | F 468BT | all | 160 - 180 HV | 50 - 85 | 45 | 50 | 40 | 20 |
| Ti 4 | F 468CT | all | 200 - 220 HV | 80 - 115 | 75 | 80 | 70 | 15 |
| Ti 5 Class AH | F 468DT | all | 30 - 39 HRC | 130 - 165 | 125 | 130 | 120 | 10 |
| Ti 5 Class BH | F 468HT | all | 30 - 39 HRC | 130 - 165 | 125 | 130 | 120 | 10 |
| Ti 7 | F 468ET | all | 160 - 180 HV | 50 - 85 | 45 | 50 | 40 | 20 |
| Ti 19 | F 468FT | all | 24 - 38 HRC | 115 - 150 | 115 | 120 | 115 | 15 |
| Ti 23 | F 468GT | all | 25 - 38 HRC | 120 - 165 | 110 | 120 | 110 | 10 |
| Ti-5-1-1-1 | F 468AHT | all | 24 - 38 HRC | 105 - 150 | 90 | 100 | 85 | 10 |
Alloy Group |
Alloy Designation |
Alloy Type |
|---|---|---|
1 |
303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se |
Austenitic |
2 |
316, 316L |
Austenitic |
3 |
321, 347 |
Austenitic |
4 |
430, 430F |
Ferritic |
5 |
410, 416, 416Se |
Martensitic |
6 |
431 |
Martensitic |
7 |
630 (17-4) |
Precipitation Hardening |
ASTM F468 Heavy Hex Bolts |
ASTM F468 Stud Bolts |
ASTM F468 Stud Bolt |
ASME SF468 Grub Screw |
ASTM F468 Anchor Bolt |
ASTM F468 Stud Bolts |
F468 Stainless Steel bolts |
ASTM F468 Stud Bolt |
Stainless Steel Threaded Rod |
ASTM F468 J Bolt |
SF468 Nuts |
F468 Nuts |
ASTM F468 Tie Rod |
ASTM F468 Studs |
