Stainless steel fasteners are known to offer great durability and based on the grade selected, the alloys tend to be cost efficient in addition to having better corrosion resistance. The F593 Stainless Steel Threaded Rod belonging to this specification have a nominal diameter size that ranges between 0.25 inch to 1.50 inches. Essentially, the ASTM F593 Stainless Steel Bolts are used in applications where resistance to general corrosion is of prime importance.
Under this specification, there are Seven groups of stainless steel alloys included. In the austenitic class, there are fourteen grades of astm f593 anchor bolts included. Whereas there are four martensitic, two ferritic, as well as one precipitation-hardened alloys that could be used in the manufacture of ASTM F593 Threaded Rod. Austenitic stainless steel alloys such as 303, 304, 304L, 305, 384, 303Se, 347, 316, 316L, 321, and XM1, 18-9LW, 302HQ may be used to produce the astm f593 bolts. The ferritic class stainless steel F593 Stud Bolt consists of grades 430 and 430F. Whereas the martensitic class F593 Nuts consists of alloys like 410, 416, 416Se, and 431.
Finally, the precipitation Hardenemd ASTM F593 Screw is the alloy 630, or as also known as 17-4. Under this specification, the ASTM F593 Fasteners could be delivered either in an age hardened condition, hardened and tempered condition, or in a cold worked condition. Though the delivery conditions for the ASTM F593 Bolts need to correspond to the alloy being used in their production. In addition to the chemical requirements of the ASTM F593 Nuts, the specification also covers its mechanical requirements.
before buy from india see Comparision of ASTM F593 Bolts price with ASTM A453 Grade 660 Stud Bolts price list
Standards |
Designation |
|---|---|
| ASTM | F593 |
| Thread Requirements | UNC & UNF, ASME B1.1, Class 2A (Fastenal will inspect and accept parts with a 1A no-go gauge) |
| Manufacturing Process | Cold Heading, Wire Drawing, Heat Treatment, Insert tapping, Inspection, Surface Plating, Packing |
| Delivery time | custom product will according to special requirement, Regular product is about 7-15 days |
| Coatings | Cadmium, Black Oxide, Teflon, Galvanized, Zinc, Xylan, Others Upon Request |
| Head | Square, Hex, Hex flange, Round, T-head, Flat & Triangular etc |
| Neck type | Square, Hex, Oval, Triangular & Knurled etc |
Dimensions |
ASME B18.3, B18.2.1 |
Melt Origin |
South America/East Europe/Japan/Korea |
Product Origin |
Made in India |
Threads Configuration |
B1.13M 6h Metric Coarse Threads and ASME B1.1 2A/3A Inch Unified Threads |
Certification |
Dual Certified As per ASME & ASTM Codes |
Additional Certifications |
Merkblatt AD 2000 W2 Certified, PED 97/23/EC Certified |
Mandatory Requirements |
Free from Radioactive & Mercury Contamination |
Additional Requirements |
NACE MR0175 / MR0103 /ISO 15156 Compliance |
| Samples | Yes |
| Payment Terms | Western Union, T/T, Paypal, Trade Assurance 30% deposit & balance before shipping or L/C |
| ASTM F593 Bolts |
|
|
|
|
Price
|
|
|---|---|---|---|---|---|---|
| Plain | ||||||
| 1-1/4"-7 Dia./Thread (UNC), Hex Head, 18-8 (304) SS Cap Screws | 4 in | Partially Threaded | 2 3/4 in | ASTM F593 |
Regular Price $30.50 / each |
|
| 1-1/4"-7 Dia./Thread (UNC), Hex Head, 18-8 (304) SS Cap Screws | 5 in | Partially Threaded | 2 1/2 in | ASTM F593 | Regular Price$31.00 / each | |
| 1/4"-20 Dia./Thread (UNC), Hex Head, 18-8 (304) SS Cap Screws | 3/8 in | Fully Threaded | 3/8 in | ASTM F593 | $914.00 / pkg. of 5000 | |
| 3/4"-10 Dia./Thread (UNC), Hex Head, (316) SS Cap Screws | 1 1/4 in | Fully Threaded | 1 1/4 in | ASTM F593 | $1,396.00 / pkg. of 225 | |
|
1-1/8"-7 Dia./Thread (UNC), Hex Head, 18-8 (304) SS Cap Screws |
6 in | Partially Threaded | 2 3/4 in | ASTM F593 |
Regular Price $40.25 / each |
| Alloy Group | Alloy Designation | Alloy Type |
|---|---|---|
| 1 | 303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se | Austenitic |
| 2 | 316, 316L | Austenitic |
| 3 | 321, 347 | Austenitic |
| 4 | 430, 430F | Ferritic |
| 5 | 410, 416, 416Se | Martensitic |
| 6 | 431 | Martensitic |
| 7 | 630 (17-4) | Precipitation Hardening |
| *The selection of an alloy within each group is at the discretion of the manufacturer unless the purchaser requests a specific alloy. | ||
pallet
BOLT DIA |
Torque FT-LBS |
||
30% Initial Torque |
70% Torque |
100% Final Torque |
|
1/2 |
16 |
36 |
52 |
9/16 |
23 |
53 |
75 |
5/8 |
31 |
73 |
104 |
3/4 |
55 |
129 |
184 |
7/8 |
71 |
166 |
237 |
1 |
107 |
249 |
356 |
1.1/8 |
127 |
297 |
424 |
1.1/4 |
179 |
417 |
596 |
1.3/8 |
186 |
435 |
622 |
1.1/2 |
246 |
574 |
821 |
1.9/16 |
168 |
392 |
560 |
1.5/8 |
191 |
445 |
636 |
1.3/4 |
240 |
561 |
801 |
1.7/8 |
298 |
696 |
994 |
2 |
366 |
853 |
1219 |
2.1/4 |
529 |
1234 |
1762 |
2.1/2 |
733 |
1709 |
2442 |
2.3/4 |
986 |
2300 |
3285 |
3 |
1289 |
3008 |
4297 |
Diameter (D) |
Body Diameter (D) |
Across the Flats (F) |
Across the Corners © |
Head Height (H) |
Thread Lengths (T) |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
MAX |
MIN |
MAX |
MIN |
MAX |
MIN |
MAX |
MIN |
< 6” |
> 6” |
|
1/2 |
0.515 |
0.482 |
0.875 |
0.85 |
1.01 |
0.969 |
0.364 |
0.302 |
1.25 |
1.5 |
5/8 |
0.642 |
0.605 |
1.062 |
1.031 |
1.227 |
1.175 |
0.444 |
0.378 |
1.5 |
1.75 |
3/4 |
0.768 |
0.729 |
1.25 |
1.212 |
1.443 |
1.383 |
0.524 |
0.455 |
1.75 |
2 |
7/8 |
0.895 |
0.852 |
1.438 |
1.394 |
1.66 |
1.589 |
0.604 |
0.531 |
2 |
2.25 |
1 |
1.022 |
0.976 |
1.625 |
1.575 |
1.876 |
1.796 |
0.7 |
0.591 |
2.25 |
2.5 |
1 1/8 |
1.149 |
1.098 |
1.812 |
1.756 |
2.093 |
2.002 |
0.78 |
0.658 |
2.5 |
2.75 |
1 1/4 |
1.277 |
1.223 |
2 |
1.938 |
2.309 |
2.209 |
0.876 |
0.749 |
2.75 |
3 |
1 3/8 |
1.404 |
1.345 |
2.188 |
2.119 |
2.526 |
2.416 |
0.94 |
0.81 |
3 |
3.25 |
1 1/2 |
1.531 |
1.47 |
2.375 |
2.3 |
2.742 |
2.622 |
1.036 |
0.902 |
3.25 |
3.5 |
1 3/4 |
1.785 |
1.716 |
2.75 |
2.662 |
3.175 |
3.035 |
1.196 |
1.054 |
3.75 |
4 |
2 |
2.039 |
1.964 |
3.125 |
3.025 |
3.608 |
3.449 |
1.388 |
1.175 |
4.25 |
4.5 |
2 1/4 |
2.305 |
2.214 |
3.5 |
3.388 |
4.041 |
3.862 |
1.548 |
1.327 |
4.75 |
5 |
2 1/2 |
2.559 |
2.461 |
3.875 |
3.75 |
4.474 |
4.275 |
1.708 |
1.479 |
5.25 |
5.5 |
2 3/4 |
2.827 |
2.711 |
4.25 |
4.112 |
4.907 |
4.688 |
1.869 |
1.632 |
5.75 |
6 |
3 |
3.081 |
2.961 |
4.625 |
4.475 |
5.34 |
5.102 |
2.06 |
1.815 |
6.25 |
6. |
NOMINAL SIZE (D) |
BODY DIAMETER |
HEAD THICKNESS |
ACROSS THE FLATS |
ACROSS BOLTS CORNERS |
||||
|---|---|---|---|---|---|---|---|---|
D (MAX) |
D (MIN) |
H (MAX) |
H (MIN) |
F (MAX) |
F (MIN) |
C (MAX) |
C (MIN) |
|
m10 |
10.00 |
9.78 |
6.63 |
6.17 |
17.00 |
15.73 |
18.48 |
17.77 |
m12 |
12.00 |
11.73 |
7.76 |
4.24 |
19.00 |
17.73 |
20.78 |
20.03 |
m14 |
14.00 |
13.73 |
9.09 |
8.51 |
22.00 |
20.67 |
24.25 |
23.35 |
m16 |
16.00 |
15.73 |
10.32 |
9.68 |
24.00 |
23.67 |
27.71 |
26.75 |
m20 |
20.00 |
19.67 |
12.88 |
12.12 |
30.00 |
29.16 |
34.64 |
32.95 |
m24 |
24.00 |
23.67 |
15.44 |
14.56 |
36.00 |
35.00 |
41.57 |
39.55 |
m30 |
30.00 |
29.67 |
19.48 |
17.92 |
46.00 |
45.00 |
53.12 |
50.85 |
m36 |
36.00 |
35.61 |
23.38 |
21.63 |
55.00 |
53.80 |
63.51 |
60.79 |
m42 |
42.00 |
41.38 |
26.97 |
25.03 |
65.00 |
62.90 |
75.06 |
71.71 |
m48 |
48.00 |
47.38 |
31.07 |
28.93 |
75.00 |
72.60 |
86.60 |
82.76 |
m56 |
56.00 |
55.26 |
36.2 |
33.80 |
85.00 |
82.20 |
98.15 |
93.71 |
m64 |
64.00 |
63.26 |
41.32 |
38.68 |
95.00 |
91.80 |
109.70 |
104.65 |
m72 |
72.00 |
71.26 |
46.45 |
43.55 |
105.00 |
101.40 |
121.24 |
115.60 |
m80 |
80.00 |
79.26 |
51.58 |
48.42 |
115.00 |
111.00 |
132.72 |
126.54 |
m90 |
90.00 |
89.13 |
57.74 |
54.26 |
130.00 |
125.50 |
150.11 |
143.07 |
m100 |
90.00 |
99.13 |
63.9 |
60.10 |
145.00 |
140.00 |
167.43 |
159.60 |
| Alloy Group | Condition | Marking | Diameter Range | Tensile, ksi | Yield, ksi min | Rockwell Hardness |
|---|---|---|---|---|---|---|
| 1 | AF | F593A | 1/4 to 1-1/2 | 65 to 85 | 20 | B85 max |
| A | F593B | 1/4 to 1-1/2 | 75 to 100 | 30 | B65 to 95 | |
| CW1 | F593C | 1/4 to 5/8 | 100 to 150 | 65 | B95 to C32 | |
| CW2 | F593D | 3/4 to 1-1/2 | 85 to 140 | 45 | B80 to C32 | |
| 2 | AF | F593E | 1/4 to 1-1/2 | 65 to 85 | 20 | B85 max |
| A | F593F | 1/4 to 1-1/2 | 75 to 100 | 30 | B65 to 95 | |
| CW1 | F593G | 1/4 to 5/8 | 100 to 150 | 65 | B95 to C32 | |
| CW2 | F593H | 3/4 to 1-1/2 | 85 to 140 | 45 | B80 to C3 |
| Nuts | Washers |
|---|---|
| F594 | SS304 or SS316 |
One essential contrast somewhere in the range of A193 and F593 hot-forged bolts is that F593 requires an extra test for weakness to intergranular corrosion, which the A193 detail doesn't. This test adds to both the expense and lead time to create this evaluation of stainless headed bolt.
| Alloy Group | Condition Furnished Unless Otherwise Specified | Optional Conditions (must be specified) |
|---|---|---|
| 1, 2, 3 | CW | AF, A, SH |
| 4 | CW | A |
| 5 | H | HT |
| 6 | H | HT |
| 7 | AH | none |
| Item | Nominal Length | Tensile Load, lbf | Full Size Tests | Machined Specimen Tests | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Diameters 3/4 inch and Less | Diameters Over 3/4 inch. | Wedge Tensile Strength | Axial Tensile Strength | Yield Strength | Rockwell Hardness | Tensile Strength | Yield Strength | Elongation | ||
| Hex head, square head and hex socket cap screws | Less than 2-1/4 D | Less than 3D | all | Option A | Option B | B | Option C | B | B | B |
| 2-1/4 D and longer | 3D and longer | 120 000 max | Mandatory | B | Mandatory | B | B | B | B | |
| 2-1/4 D and longer | 3D and longer | over 120 000 | Option A | B | Option A | B | Option B | Option B | Option B | |
| Stud bolts and other bolts | Less than 2-1/4 D | Less than 3D | all | B | Option A | B | Option B | B | B | B |
| 2-1/4 D and longer | 3D and longer | 120 000 max | B | Mandatory | Mandatory | B | B | B | B | |
| 2-1/4 D and longer | 3D and longer | over 120 000 | B | Option A | Option A | B | Option B | Option B | Option B | |
| SpecialsC | all | all | all | B | B | Mandatory | B | B | B | B |
| Nominal Size, inch. | Coarse Threads - UNC | Fine Threads - UNF | Thread Series - 8UN | |||
|---|---|---|---|---|---|---|
| Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | |
| 1/4 | 20 | 0.0318 | 28 | 0.0364 | -- | -- |
| 5/16 | 18 | 0.0524 | 24 | 0.0580 | -- | -- |
| 3/18 | 16 | 0.0775 | 24 | 0.0878 | -- | -- |
| 7/16 | 14 | 0.1063 | 20 | 0.1187 | ||
| 1/2 | 13 | 0.1419 | 20 | 0.1599 | ||
| 9/16 | 12 | 0.1820 | 18 | 0.2030 | ||
| 5/8 | 11 | 0.2260 | 18 | 0.2560 | ||
| 3/4 | 10 | 0.3340 | 16 | 0.3730 | ||
| 7/8 | 9 | 0.4620 | 14 | 0.5090 | ||
| 1 | 8 | 0.6060 | 12 | 0.6630 | ||
| 1 1/8 | 7 | 0.7630 | 12 | 0.8560 | 8 | 0.790 |
| 1 1/4 | 7 | 0.9690 | 12 | 1.0730 | 8 | 1.000 |
| 1 3/8 | 6 | 1.1550 | 12 | 1.3150 | 8 | 1.233 |
| 1 1/2 | 6 | 1.4050 | 12 | 1.5810 | 8 | 1.492 |
A Tensile stress areas are computed using the following formula: AB = 0.7854 [D- (0.9743/n)]2
Where:
AB = Tensile stress area, inch2,
D = Nominal size (basic major diameter), in., and,
n = number of threads per inch.
No. |
Description |
|---|---|
DIN 84 |
Slotted Cheese Head Machine Screws |
DIN 85 |
Slotted Pan Head Machine Screws |
DIN 94 |
Cotter Pin |
DIN 125A |
Flat Washer (without Chamfer) |
DIN 125B |
Flat Washer (with Chamfer) |
DIN 127B |
Split Lock Washer |
DIN 137B |
Spring Wave Washer |
DIN 315 |
Wing Nut |
DIN 439B |
Machine Screws Hex Nut, Finished Hex Jam Nut |
DIN 911 |
Long Arm Hex Key |
DIN 912 |
Hex Socket Head Cap Screws |
DIN 916 |
Hex Socket Set Screws |
DIN 931 |
Hex Head Cap Screws Partially Threaded |
DIN 933 |
Hex Head Cap Screws Fully Threaded |
DIN 934 |
Finished Hex Nut |
DIN 939 |
Double End Stud |
DIN 960 |
Hex Head Cap Screws Partially Threaded |
DIN 961 |
Hex Head Cap Screws Fully Threaded |
DIN 963 |
Slotted Flat Head Machine Screws |
DIN 964 |
Slotted Oval Head Machine Screws |
DIN 965 |
Phillips Flat Head Machine Screws |
DIN 966 |
Phillips Oval Head Machine Screws |
DIN 975 |
Threaded Rod |
DIN 980V |
Hex Steel Prevailing Torque Lock Nut |
DIN 985 |
Hex Nylon Insert Lock Nut |
DIN 6334 |
Rod Coupling Nut |
DIN 6797A |
External Tooth Lock Washer |
DIN 6797J |
Internal Tooth Lock Washer |
DIN 6912 |
Hex Low Socket Head Cap Screws |
DIN 6921 |
Hex Flange Head Screws |
DIN 6923 |
Hex Flange Nut |
ISO 7379 |
Hex Socket Head Shoulder Screws |
ISO 7380 |
Hex Button Socket Head Cap Screws |
DIN 7985 |
Phillips Pan Head Machine Screws |
DIN 7991 |
Hex Flat Socket Head Cap Screws |
| Composition, %, maximum except as shown | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS Designation | Alloy Group | Alloy | Carbon | Manganese | Phosphorus | Sulfur | Silicon | Chromium | Nickel | Copper | Molybdenum | Others |
| Austenitic Alloys | ||||||||||||
| S30200 | 1 | 303 | 0.15 | 2.00 | 0.200 | 0.150 min | 1 | 17.0 - 19.0 | 8.0 - 10.0 | -- | 0.60 maxA | -- |
| S30323 | 1 | 303 Se | 0.15 | 2.00 | 0.200 | 0.060 | 1 | 17.0 - 19.0 | 8.0 - 10.0 | -- | -- | Se 0.15 min |
| A30400 | 1 | 304 | 0.08 | 2.00 | 0.045 | 0.030 | 1 | 18.0 - 20.0 | 8.0 - 10.5 | 1.00 | -- | -- |
| S30403 | 1 | 304 L | 0.03 | 2.00 | 0.045 | 0.030 | 1 | 18.0 - 20.0 | 8.0 - 12.0 | 1.00 | -- | -- |
| S30500 | 1 | 305 | 0.12 | 2.00 | 0.045 | 0.030 | 1 | 17.0 - 19.0 | 10.5 - 13.0 | 1.00 | -- | -- |
| S38400 | 1 | 384 | 0.08 | 2.00 | 0.045 | 0.030 | 1 | 15.0 - 17.0 | 17.0 - 19.0 | -- | 0.50 maxA | -- |
| S20300 | 1 | XM1 | 0.08 | 5.00 - 6.50 | 0.040 | 0.18 - 0.35 | 1 | 16.0 - 18.0 | 5.0 - 6.5 | 1.75 - 2.25 | -- | -- |
| S30430 | 1 | 18-9LW | 0.10 | 2.00 | 0.045 | 0.030 | 1 | 17.0 - 19.0 | 8.0 - 10.0 | 3.0 - 4.0 | -- | -- |
| S30433 | 1 | 302HQ | 0.03 | 2.00 | 0.045 | 0.030 | 1 | 17.0 - 19.0 | 8.0 - 10.0 | 3.0 - 4.0 | -- | -- |
| S31600 | 2 | 316 | 0.08 | 2.00 | 0.045 | 0.030 | 1 | 16.0 - 18.0 | 10.0 - 14.0 | -- | 2.0 - 3.0 | -- |
| S31603 | 2 | 316 L | 0.03 | 2.00 | 0.045 | 0.030 | 1 | 16.0 - 18.0 | 10.0 - 14.0 | -- | 2.0 - 3.0 | -- |
| S32100 | 3 | 321 | 0.08 | 2.00 | 0.045 | 0.030 | 1 | 17.0 - 19.0 | 9.0 - 12.0 | -- | -- | Ti 5 x C min |
| S34700 | 3 | 347 | 0.08 | 2.00 | 0.045 | 0.030 | 1 | 17.0 - 19.0 | 9.0 - 13.0 | -- | -- | Cb+Ta 10 x C min |
| Ferritic Alloys | ||||||||||||
| S43000 | 4 | 430 | 0.12 | 1.00 | 0.040 | 0.030 | 1 | 16.0 - 18.0 | -- | -- | -- | -- |
| S43020 | 4 | 430F | 0.12 | 1.25 | 0.060 | 0.150 min | 1 | 16.0 - 18.0 | -- | -- | 0.60 maxA | -- |
| Martensitic Alloys | ||||||||||||
| S41000 | 5 | 410 | 0.15 | 1.00 | 0.040 | 0.030 | 1 | 11.5 - 13.5 | -- | -- | -- | -- |
| S41600 | 5 | 416 | 0.15 | 1.25 | 0.060 | 0.150 min | 1 | 12.0 - 14.0 | -- | -- | 0.60 maxA | -- |
| S41623 | 5 | 416 Se | 0.15 | 1.25 | 0.060 | 0.060 | 1 | 12.0 - 14.0 | -- | -- | Se 0.15 min | -- |
| S43100 | 6 | 431 | 0.20 | 1.00 | 0.040 | 0.030 | 1 | 15.0 - 17.0 | 1.25 - 2.50 | -- | -- | -- |
| Precipitation Hardening Alloy | ||||||||||||
| S17400 | 7 | 630 | 0.07 | 1.00 | 0.040 | 0.030 | 1 | 15.0 - 17.5 | 3.0-5.0 | -- | -- | Cb+Ta 0.15 - 0.45 |
| Stainless Steel Alloys | ConditionB | Alloy Mechanical Property Marking | Nominal Diameter, inch | Full Size Tests | Machined Specimen Tests | ||||
|---|---|---|---|---|---|---|---|---|---|
| Tensile Strength, ksiC | Yield Strength, ksiDC | Rockwell Hardness | Tensile Strength, ksiC | Yield Strength, ksiDC | Elongation in 4D, % | ||||
| Austenitic Alloys | |||||||||
| 1 (303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se) | AF | F593A | 1/4 to 1-1/2, incl. | 65 - 85 | 20 | B85 max | 60 | 20 | 40 |
| 1 (303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se) | A | F593B | 1/4 to 1-1/2, incl. | 75 - 100 | 30 | B65 to 95 | 70 | 30 | 30 |
| 1 (303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se) | CW1 | F593C | 1/4 to 5/8, incl. | 100 - 150 | 65 | B95 to C322 | 95 | 60 | 20 |
| 1 (303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se) | CW1 | F593C | 1/4 to 5/8, incl. | 100 - 150 | 65 | B95 to C322 | 95 | 60 | 20 |
| 1 (303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se) | CW2 | F593D | 3/4 to 1-1/2, incl. | 85 - 140 | 45 | B80 to C32 | 80 | 40 | 25 |
| 1 (303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se) | SH1 | F593A | 1/4 to 5/8, incl. | 120 - 160 | 95 | C24 to C36 | 115 | 90 | 12 |
| 1 (303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se) | SH2 | F593B | 3/4 to 1, incl. | 110 - 150 | 75 | C20 to C32 | 105 | 70 | 15 |
| 1 (303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se) | SH3 | F593C | 1-1/8 to 1-1/4, incl. | 100 - 140 | 60 | B95 to C30 | 95 | 55 | 20 |
| 1 (303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se) | SH4 | F593D | 1-3/8 to 1-1/2, incl. | 95 - 130 | 45 | B90 to C28 | 90 | 40 | 28 |
| 2 (316, 316L) | AF | F593E | 1/4 to 1-1/2", incl. | 65 - 85 | 20 | B85 max | 60 | 20 | 40 |
| 2 (316, 316L) | A | F593F | 1/4 to 1-1/2", incl. | 75 - 100 | 30 | B65 to 95 | 70 | 30 | 30 |
| 2 (316, 316L) | CW1 | F593G | 1/4 to 5/8, incl. | 100 - 150 | 65 | B95 to C322 | 95 | 60 | 20 |
| 2 (316, 316L) | CW2 | F593H | 3/4 to 1-1/2, incl. | 85 - 140 | 45 | B80 to C32 | 80 | 40 | 25 |
| 2 (316, 316L) | SH1 | F593E | 1/4 to 5/8, incl. | 120 - 160 | 95 | C24 to C36 | 115 | 90 | 12 |
| 2 (316, 316L) | SH2 | F593F | 3/4 to 1, incl. | 110 - 150 | 75 | C20 to C32 | 105 | 70 | 15 |
| 2 (316, 316L) | SH3 | F593G | 1-1/8 to 1-1/4, incl. | 100 - 140 | 60 | B95 to C30 | 95 | 55 | 20 |
| 2 (316, 316L) | SH4 | F593H | 1-3/8 to 1-1/2, incl. | 95 - 130 | 45 | B90 to C28 | 90 | 40 | 28 |
| 3 (321, 347) | AF | F593J | 1/4 to 1-1/2, incl. | 65 - 85 | 20 | B85 max | 60 | 20 | 40 |
| 3 (321, 347) | A | F593K | 1/4 to 1-1/2, incl. | 75 - 100 | 30 | B65 to 95 | 70 | 30 | 30 |
| 3 (321, 347) | CW1 | F593L | 1/4 to 5/8, incl. | 100 - 150 | 65 | B95 to C322 | 95 | 60 | 20 |
| 3 (321, 347) | CW2 | F593M | 3/4 to 1-1/2, incl. | 85 - 140 | 45 | B80 to C32 | 80 | 40 | 25 |
| 3 (321, 347) | SH1 | F593J | 1/4 to 5/8, incl. | 120 - 160 | 95 | C24 to C36 | 115 | 90 | 12 |
| 3 (321, 347) | SH2 | F593K | 3/4 to 1, incl. | 110 - 150 | 75 | C20 to C32 | 105 | 70 | 15 |
| 3 (321, 347) | SH3 | F593L | 1-1/8 to 1-1/4, incl. | 100 - 140 | 60 | B95 to C30 | 95 | 55 | 20 |
| 3 (321, 347) | SH4 | F593M | 1-3/8 to 1-1/2, incl. | 95 - 130 | 45 | B90 to C28 | 90 | 40 | 28 |
| Ferritic Alloys | |||||||||
| 4 (430, 430F) | AF | F593X | 1/4 to 1-1/2, incl. | 55 - 75 | 30 | B85 max | 50 | 25 | -- |
| 4 (430, 430F) | A | F593N | 1/4 to 1-1/2, incl. | 55 - 75 | 30 | B85 max | 50 | 25 | -- |
| 4 (430, 430F) | CW1 | F593V | 1/4 to 5/8, incl. | 60 - 105 | 40 | B75 to 98 | 55 | 35 | -- |
| 4 (430, 430F) | CW2 | F593W | 3/4 to 1-1/2, incl. | 55 - 100 | 30 | B65 to 95 | 50 | 25 | -- |
| Martensitic Alloys | |||||||||
| 5 (410, 416, 416Se) | H | F593P | 1/4 to 1-1/2, incl. | 110 - 140 | 90 | C20 to 30 | 110 | 90 | 18 |
| 5 (410, 416, 416Se) | H | F593P | 1/4 to 1-1/2, incl. | 110 - 140 | 90 | C20 to 30 | 110 | 90 | 18 |
| 5 (410, 416, 416Se) | HT | F593R | 1/4 to 1-1/2, incl. | 160 - 190 | 120 | C34 to 45 | 160 | 120 | 12 |
| 6 (431) | H | F593S | 1/4 to 1-1/2, incl. | 125 - 150 | 100 | C25 to 32 | 125 | 100 | 15 |
| 6 (431) | HT | F593T | 1/4 to 1-1/2, incl. | 180 - 220 | 140 | C40 to 48 | 180 | 140 | 10 |
| Precipitation Hardening Alloy | |||||||||
| 7 (630) | AH | F593U | 1/4 to 1-1/2, incl. | 135 - 170 | 105 | C28 to 38 | 135 | 105 | 16 |
ASTM F593 Heavy Hex Bolts |
ASTM F593 Stud Bolts |
ASTM F593 Stud Bolt |
ASME SF593 Grub Screw |
ASTM F593 Anchor Bolt |
ASTM F593 Stud Bolts |
F593 Stainless Steel bolts |
ASTM F593 Stud Bolt |
Stainless Steel Threaded Rod |
ASTM F593 J Bolt |
SF593 Nuts Exporter |
F593 Nuts |
ASTM F593 Tie Rod |
ASTM F593 Studs |
