ASTM B408 Inconel Alloy 800H/HT Rod Suppliers in India in specific size, surface finish

Incoloy 800 Round Bar

 

1/16” up to 20”dia UNS N08800/N08811/N08810 Hex, Flat and Square bar material in Stock, check latest price Ex Mumbai

Iron, Nickel, and chromium, together form the basic chemical makeup of Incoloy 800. The microstructure of most Inconel alloys is austenitic, which means they have an FCC crystalline structure. Because the alloy has an austenitic microstructure, the weldability of the ASTM B408 UNS N08800 rod is considered to be good. Moreover, the workability of the alloy is good, which means using cold working or hot working practices is possible to create various forms including round, rectangular, or even an N08810 Square bar.

Although the material has a good tensile strength at moderately high temperatures, using the Incoloy 800 Round Bar at elevated temperatures will cause a reduction in its tensile strength. However, like most austenitic stainless steel alloys, the UNS N08811 Bright Bar proves to be a useful asset, particularly in environments that contain higher levels of corrosive media. Aside from being resistant to oxidation, the metal is resilient to the effects of carburization. Although there are some temperature limitations of using this alloy, being an austenitic stainless steel type, it has the advantage of modification in the content of carbon.

Therefore, the Inconel 800H Flat Bar is an alloy that could be used at elevated temperature settings, especially if the component is required to withstand prolonged exposure to heat. The properties shared by alloy 800H and the Alloy 800ht Rod are similar, yet, the resistance to creep and rupture properties are greater than the former. And in comparison to the other two alloys, the HT version of DIN 1.4876 Hex Bar exhibits essential characteristics such as excellent resistance to oxidation, sulfidation, as well as carburization.

compare Incoloy 800 Round bar price with inconel 625 round bar price list

 

 

Specification Table of Incoloy 800 Round Bar
Dimensions BS, DIN, EN, AISI, JIS, ASME, ASTM
size of Round bar Thickness: 2 milimeter-100 milimeter
size of Flat bar Width: 10 milimeter - 500 milimeter
Dia: 3 milimeter-~800 milimeter
Channel Bars 80 x 40 milimeter- 150 x 75 milimeter section; 5.0 - 6.0 milimeter thickness
size of Angle bar 3* 20* 20 milimeter~12* 100* 100 milimeter
Size of Billet 1/2 - 495 milimeter Diameter
Rectangular Bars Section 3 to 12 milimeter thickness
Form Round, Rod, T-Bars, Channel Bars, Precision Ground Bars, Flat Bars, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Threaded, Hex (A/F), Rectangle, Half Round Bars, Profiles, Billet, Ingot, Forging, I/H Bars etc.
Size of Rectangles 33 x 30 milimeter - 295 x 1066 milimeter
Surface Bright, Hot Rolled Pickled, Hairline, Cold Drawn, Sand Blasting Finished, Polished
Processing cutting to 650 milimeter
Hollow Bars sizes 32mm Outside diameter x 16 milimeter Inside diameter to 250 milimeter Outside diameter x 200 milimeter Inside diameter)
Tolerance H9, K9, H8, H12, K12, H11, H13, K10, K11, H10, or as per need
Finish centreless ground, smooth turned, peeled, hot rolled, Rough Turned, Polish, Bright, Cold (bright) drawn, Centreless Ground, Grinding & Black, hot rolled annealed
Method Cold Drawn, Hot Rolled, Cold Rolled Rod, Forged Round Bars
Condition annealed, tempered and Hardened

 

Incoloy 800 Round Bar Price Per Kg
Description Per Unit (INR) Price in USD Price in EURO
Incoloy 800ht Nickel Alloy Round Bars 12.7 Mm Dia X 1991milimeter 7,304 98.77 82.56
Hot Rolled 65 Mm Od,. 1mtr Long Incoloy 800 Ht Bars Round Solid 123,118 1664.88 1391.61
Size : 30 Mm Dia Asme Sb 408 Uns No. 8810 Incoloy 800h Round Bars 1.5 To 2 Mtrs Length 19,512 263.85 220.54
Incoloy 800h Round Bars 5,099 68.95 57.63
Size : 9.6 Mm Dia X 3000 Mm Long Astm B 408 Gr.uns No. 8800 Incoloy 800 Round Bars In 3 Mtrs Length, Nace Mr-0175. 51,789 700.32 585.37
SIZE: 15MM DIA ASTM B 408 GR.UNS NO. 8810 INCOLOY 800H ROUND Bars 2 TO 3 MTRS LENGTH, NACE MR-0175 12,888 174.28 145.67
Size 16mm X 2 To 3 Meters Incoloy800 Nickel Alloy Round Bars 1,443 19.51 16.31
Size : 50 Mm Dia X 2000 Mm Long Astm B 408 Gr.uns No. 8800 Incoloy 800 Round Bars In 2 Mtrs Length, Nace Mr-0175. 68,474 925.95 773.96
Size : 15 Mm Dia Astm B 408 Gr.uns No.8810 Incoloy 800h Round Bars 2 To 3 Mtrs Length Nace Mr. 0175 13,304 179.91 150.38
Size : 50 Mm Dia X 2000 Mm Long Astm B 408 Gr.uns No. 8800 Incoloy 800 Round Bars In 2 Mtrs Length, Nace Mr-0175. 68,474 925.95 773.96

 

Incoloy 800 Rod Packaging
incoloy 800 round bar packaging
alloy 800 rod packaging

 

buy Cut to Length of Incoloy 800ht Cold Finished Bars and Threaded Bars at discounted price

 

ASTM B408 UNS N08800 rod Weight Calculator

 

Types of incoloy 800 round bar
Inconel Alloy 800 Rod

Incoloy 800 Rod

alloy 800 Hex Bar

Incoloy 800 Hex Bar

incoloy UNS N08800 Round Bar

incoloy UNS N08800 Round Bar

800 Incoloy Flat Bar

800 Incoloy Flat Bar

incoloy 800 Bar Material

incoloy 800 Bar Material

Incoloy 800 Rounds

Incoloy 800 Rounds

Nickel Alloy 800Ht  Square Bar

Nickel Alloy 800Ht Square Bar

1.4876 Incoloy 800 Annealed Bar

1.4876 Incoloy 800 Annealed Bar

ASTM B408 incoloy 800 Polished Bar

ASTM B408 incoloy 800 Polished Bar

WERKSTOFF NR. 1.4876 Bright Bar

WERKSTOFF NR. 1.4876 Bright Bar

Din 1.4876 Cold Drawn Round Bar

Din 1.4876 Cold Drawn Round Bar

800H Alloy Black Bar

800H Alloy Black Bar

ASTM B408 800 Incoloy Round Bar Hot Rolled

ASTM B408 800 Incoloy Round Bar Hot Rolled

Alloy incoloy 800  Hot Rolled Flat Bar

Alloy incoloy 800 Hot Rolled Flat Bar

800 Incoloy Flat Bar Cold Drawn

800 Incoloy Flat Bar Cold Drawn

Incoloy 800 Hot Rolled Square Bar

Incoloy 800 Hot Rolled Square Bar

 

Incoloy 800ht Rod Condition
Annealed
ANN
Hardened and tempered.
H&T
Precipitation hardened.
PH

 

UNS N08811 Bright Bar Stock List
Material
form
(in milimeter) Dimension
AMS 5766 Incoloy 800HT (21 Cr/32 Ni)
Rod, cold drawn, Round bar, solution annealed
Diameter=12.0, Weight=0.9 kg/m
Rod, forged, Round bar, solution annealed, peeled
Diameter=45.0, Weight=12.64 kg/m
Rod, solution annealed, Round bar, peeled
Diameter=50.4, Weight=15.5 kg/m
Rod, solution annealed, Round bar, peeled
Diameter=65.0, Weight=26.5 kg/m
Rod, solution annealed, Round bar, machined
Diameter=75.0, Weight=36.0 kg/m
Rod, peeled, Round bar, solution annealed
Diameter=80.0, Weight=40.0 kg/m
Rod, Round bar, solution annealed, hot rolled, peeled
Diameter=90.0, Weight=51.0 kg/m
Rod, annealed, hot rolled, Round bar, peeled
Diameter=95.0, Weight=55.1 kg/m
AMS 5766 Incoloy 800H/HT (21 Cr/32 Ni)
Rod, Round bar, solution annealed, hot rolled, peeled
Diameter=30.0, Weight=5.9 kg/m
AMS 5766 Incoloy 800H/HT (21 Cr/32 Ni)
Rod, peeled, Round bar, solution annealed
Diameter=160.0, Weight=156.2 kg/m
AMS 5766 Incoloy 800H (21 Cr/32 Ni)
Rod, annealed, hot rolled, Round bar
Diameter=70.0, Weight=31.6 kg/m
AMS 5766 Incoloy 800H/HT (21 Cr/32 Ni)
Rod, peeled, Round bar, solution annealed
Diameter=100.0, Weight=62.5 kg/m
Rod, annealed, hot rolled, Round bar, peeled
Diameter=130.0, Weight=103.1 kg/m
Rod, annealed, hot rolled, Round bar, peeled
Diameter=140.0, Weight=119.6 kg/m
Rod, peeled, Round bar, solution annealed
Diameter=150.0, Weight=137.3 kg/m
AMS 5766 INCOLOY 800HT (21 Cr/32 Ni)
Rod, solution annealed, Round bar, ground, cold drawn
Diameter=10.0, Weight=0.7 kg/m
AMS 5766 INCOLOY 800HT (21 Cr/32 Ni)
Rod, peeled, Round bar, solution annealed
Diameter=60.0, Weight=22.8 kg/m
AMS 5766 INCOLOY 800HT (21 Cr/32 Ni)
Rod, peeled, Round bar, solution annealed
Diameter=40.0, Weight=10.0 kg/m

 

We Keep Bulk Stock of ASTM B408 UNS N08811 bright Bar at our stockyard, contact us to request a quote

 

Density of Incoloy 800H Round Bar
Element Incoloy 800
Density 7.94 g/cm3

 

DIN 1.4876 Hex Bar Standard Sizes
Wt per Foot t of hex bar
Size in Inches of hex bar
Wt per 12 ' of hex bar
0.0180
1/4″
2.160
0.0104
3/16″
1.248
0.0600
3/8″
4.920
0.0290
5/16″
3.480
0.0740
1/2″
8.880
0.0560
7/16″
6.72
1.150
5/8″
13.80
0.0930
9/16″
11.16
1.660
3/4″
19.92
1.390
11/16″
16.68
2.300
7/8″
27.60
2.600
15/16″
31.20
1.950
13/16″
23.40
3.30
1-1/16″
39.60
2.90
1″
34.80
4.600
1-1/4″
55.20
3.700
1-1/8″
44.40
5.600
1-3/8″
67.20
5.100
1-5/16″
61.20
6.600
1-1/2″
79.20
6.100
1-7/16″
73.20
26.53
3″
318.36
9.030
1-3/4″
108.36
7.800
1-5/8″
93.60
18.42
2-1/2″
221.04
11.80
2″
141.60
10.0400
1-7/8″
124.80
16.920
2-3/8″
203.04
14.920
2-1/4″
179.04

 

Processing of N08810 Square bar
  • Heat Treatment
  • Welding
  • Cold Working
  • Heat Resistance
  • Hot Working
  • Fabrication
  • Machining

 

Melting Point of Incoloy 800H Rod
Element Incoloy 800
Melting Point 1385 °C (2525 °F)

 

Incoloy 800H Flat Bar Size Table
metric weights and sizes
Colour Code
Size
(meters) Length
Kilogram per Meter
Blue
13 x 3
6.0
0.031
Blue
10 x 3
0.024
Blue
16 x 3
0.038
Orange
13 x 5
0.046
Red
16 x 8
1.03
Orange
16 x 5
0.064
Orange
20 x 5
0.081
Blue
20 x 3
0.048
Yellow
20 x 10
1.61
White
20 x 6
0.097
Orange
25 x 5
1.01
Blue
25 x 3
0.060
Red
25 x 8
1.61
White
25 x 6
1.21
Pink
25 x 12
2.41
Yellow
25 x 10
2.01
Orange
32 x 5
1.29
Blue
32 x 3
0.077
Red
32 x 8
2.06
White
32 x 6
1.55
Pink
32 x 12
3.09
Yellow
32 x 10
2.58
Blue
40 x 3
0.097
White
40 x 6
1.93
Orange
40 x 5
1.61
Yellow
40 x 10
3.22
Red
40 x 8
2.58
Grey
40 x 16
5.15
Pink
40 x 12
3.86
Blue
50 x 3
1.21
Green
40 x 20
6.14
White
50 x 6
2.41
Orange
50 x 5
2.01
Yellow
50 x 10
4.02
Red
50 x 8
3.22
Grey
50 x 16
6.44
Pink
50 x 12
4.83
Purple
50 x 25
10.01
Green
50 x 20
8.05
Orange
65 x 5
2.62
Blue
65 x 3
1.57
Red
65 x 8
4.18
White
65 x 6
3.14
Pink
65 x 12
6.28
Yellow
65 x 10
5.23
Green
65 x 20
10.05
Grey
65 x 16
8.37
Orange
75 x 5
3.02
White
75 x 6
3.62
Purple
65 x 25
13.1
Yellow
75 x 10
6.04
Red
75 x 8
4.83
Grey
75 x 16
9.66
Pink
75 x 12
7.24
Purple
75 x 25
15.1
Green
75 x 20
12.1
Orange
90 x 5
3.62
Yellow
75 x 40
24.1
White
90 x 6
4.35
Red
90 x 8
5.79
Yellow
90 x 10
7.24
Pink
90 x 12
8.69
Orange
100 x 5
4.02
White
100 x 6
4.83
Red
100 x 8
6.44
Yellow
100 x 10
8.05
Pink
100 x 12
9.66
Grey
100 x 16
12.9
Green
100 x 20
16.1
Purple
100 x 25
20.01
Green
100 x 50
40.02
White
110 x 6
5.31
Red
110 x 8
7.08
Yellow
110 x 10
8.85
Pink
110 x 12
10.06
Orange
130 x 5
5.23
White
130 x 6
6.28
Red
130 x 8
8.37
Yellow
130 x 10
10.05
Pink
130 x 12
12.6
Grey
130 x 16
16.7
Green
130 x 20
20.09
Purple
130 x 25
26.2
Orange
150 x 5
6.04
White
150 x 6
7.24
Red
150 x 8
9.66
Yellow
150 x 10
12.1
Pink
150 x 12
14.5
Grey
150 x 16
19.3
Green
150 x 20
24.1
Purple
150 x 25
30.01
Green
150 x 50
60.04
Orange
180 x 5
7.24
White
180 x 6
8.69
Yellow
180 x 10
14.5
Pink
180 x 12
17.4
Grey
180 x 16
23.2
Green
180 x 20
29.0
Purple
180 x 25
36.2
White
200 x 6
9.66
Red
200 x 8
12.9
Yellow
200 x 10
16.1
Pink
200 x 12
19.3
Grey
200 x 16
25.7
Green
200 x 20
32.2
Purple
200 x 25
40.03
White
250 x 6
12.1
Red
250 x 8
16.1
Yellow
250 x 10
20.01
Pink
250 x 12
24.1
Grey
250 x 16
32.2
Green
250 x 20
40.02
Purple
250 x 25
50.03
White
300 x 6
14.5
Red
300 x 8
19.3
Yellow
300 x 10
24.1
Pink
300 x 12
29.0
Grey
300 x 16
38.6
Green
300 x 20
48.3
Purple
300 x 25
60.04

 

Forms & Shapes of UNS N08800 Bright Bar
  • Rings
  • Rod
  • T-Bars
  • Flat Bars
  • Blocks
  • Hollow
  • Precision Ground Bars
  • Round
  • Channel Bars
  • Round Rod
  • Square
  • Forging
  • Rectangular Bar
  • Half Round Bars
  • Threaded
  • Profiles
  • I/H Bars
  • Rectangle
  • Ingot
  • Billet
  • Triangle
  • Hex (A/F)

 

Check Tolerances, size chart and Price list of Incoloy 800 Welding Rod and Spring Steel Bars Ex Mumbai

 

Size And Iso Tolerance 800 Incoloy Flat Bar
Type SIZES (Inches) SIZES (milimeter) ISO Tolerance
Polished and Peeled 1.50” to 6.00” 40.00 to 150.00 h11, ASTMA-484 h11-DIN 1013
Ground and Cold Drawn 5/6” to 2.50” 10.00 to 75.00 h8-h9-h10-h11
Ground and Peeled 3/4″ to 2.00” 20.00 to 50.00 h9-h10-h11, ASTM B408
Polish and Cold Drawn 1/8” to 3.00” 3.00 to75.00 h8-h9-h10-h11, ASTM B408

 

Incoloy 800 Cold Drawn Round Bar Test Certificates
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
  • Raw Materials Certificate
  • EN 10204/3.1B,

 

International Standards of Incoloy 800HT Round Bar
  • SEW 470
  • BS 3075NA15
  • ASTM B 408 & ASME SB 408
  • ISO 9723
  • VdTÜV 412 & 434
  • ISO 9724
  • ISO 9725
  • ASME Code Case 1325
  • ASTM B 564 & ASME SB 564
  • ASME Code Case 1949
  • BS 3076NA15
  • DIN 17460
  • EN 10095

 

Incoloy Alloy 800 Round Bar Characteristics
  • Readily machined by standard methods
  • Higher creep and rupture properties for high temperature situations above 1100°F (600°C)
  • Resistance to aqueous corrosion at moderate temperatures
  • Excellent resistance to oxidation, sulfidation, and carburization
  • Resistant to high temperature corrosion and prolonged exposure

 

Specific Gravity of Nickel Alloy 800 Polished Bar
Specific Gravity of Alloy 800 Bar
7.94 g/cm3

 

Destructive And Non-destructive Testing
  • Pitting Corrosion Test
  • Chemical examination and Spectro Analysis
  • Positive material recognition
  • Eddy Current test
  • Buckling & Crushing test
  • Mechanical examining like tensile, Elongation and reduction of area.
  • Hardness Test

 

Incoloy 800 Bar Application
  • Pressure vessels and heat exchangers
  • Hydrocarbon cracking
  • Industrial furnace components and equipment
  • Equipment for Heat-Treating
  • Petrochemical and chemical processing

 

800 Incoloy Round Bar Ready Stock
Incoloy 800Ht Rounds Incoloy alloy 800H Bright Flat Bars
Incoloy 800Ht Cold Drawn Square Bar Incoloy 800 Bright Rods material
Incoloy 800 ASTM B408 Rods 800 Incoloy Cold Drawn Flat Bar
Incoloy 800 Round Bars ASTM B408 Incoloy 800 Flat Bar
Inconel 800 Bar UNS N08800 Precision Ground Bar
ASTM B408 UNS N08800 Bright Bars Alloy 800H Polished Flat Bar
Incoloy 800 Rounds ASTM B408 UNS N08800 Flat Bar Black
800 Incoloy Polished Square Rod Incoloy 800 Hot Rolled Bright Rod
Incoloy alloy 800H Rod Incoloy 800 Annealed Flat Bar
Incoloy Alloy 800HT Square Bar ASTM B408 Alloy 800H Threaded Bar
Incoloy 800Ht Hex Rods Nickel 800 Threaded Rod
Alloy 800H Round Bars 800 Incoloy Flat Rod stock
Nickel Alloy 800 Forged Rod Incoloy alloy 800H Polished Rods
Incoloy 800 Polished Hex Bar Incoloy alloy 800H Hexagonal Rod
ASTM B408 UNS N08800 Annealed Rectangular Bar Nickel Alloy 800 Polished Hex Rod
Incoloy 800Ht Rectangular Rods Nickel 800 Black Threaded Bar
Incoloy 800Ht Hex Rods Bright ASTM B408 Incoloy 800 Hollow Bar
Inconel 800HT Bar Inconel 800H hot finish round bar
Nickel 800 Annealed Hex Bar ASTM B408 UNS N08800 Cold Drawn Rounds

 

Length of 800 Incoloy Round Bar
  • USA : 40 feet
  • standard length is 9 to 12 metres

 

ASTM B408 incoloy 800 Round Bar Weight Chart
Size kilogram / Meter kilogram / Foot Size kilogram / Meter kilogram / Foot Size kilogram / Meter kilogram / Foot
1/8" 0.062 0.019 22mm 2.979 0.908 3 to 1/4" 41.996 12.800
3mm 0.055 0.017 20mm 2.470 0.753 3" 35.762 10.900
4mm 0.098 0.030 24mm 3.543 1.080 3 to 3/4" 55.780 17.001
5/32" 0.095 0.029 7/8" 3.038 0.926 3 to 1/2" 48.772 14.850
5mm 0.154 0.047 1" 3.970 1.210 4 to 1/4" 72.249 21.908
3/16" 0.141 0.043 25mm 3.871 1.180 4" 63.340 19.306
6mm 0.223 0.068 27mm 4.490 1.368 4 to 3/4" 90.249 27.366
7/32" 0.190 0.058 26mm 4.170 1.271 4 to 1/2" 80.340 24.4487
7mm 0.298 0.091 30mm 5.548 1.691 5 to 1/2" 121.000 36.690
1/4" 0.249 0.076 1 to 1/8" 5.033 1.534 5" 99.940 30.461
8mm 0.398 0.120 32mm 6.314 1.894 6 to 1/2" 167.630 51.093
5/16" 0.387 0.118 1 to 1/4" 6.349 1.924 6" 143.900 43.860
3/8" 0.557 0.170 35mm 7.553 2.390 7 to 1/2" 225.000 68.226
9mm 0.498 0.152 1 to 3/8" 7.550 2.303 7" 196.000 59.432
11mm 0.748 0.228 38mm 8.903 2.792 10" 397.140 121.048
10mm 0.620 0.189 36mm 7.999 2.438 8" 254.55 77.586
12mm 0.889 0.271 40mm 9.872 3.009      
7/16" 0.761 0.232 1 to 1/2" 8.951 2.715      
13mm 1.043 0.318 1 to 3/4" 12.179 3.712      
1/2" 0.994 0.303 1 to 5/8" 10.449 3.200      
9/16" 1.256 0.383 1 to 7/8" 13.977 4.260      
14mm 1.207 0.368 45mm 12.555 3.807      
5/8" 1.551 0.473 50mm 15.414 4.698      
15mm 1.391 0.424 48mm 14.205 4.330      
17mm 1.791 0.543 2 to 1/8" 17.963 5.475      
16mm 1.578 0.481 2" 15.906 4.848      
18mm 2.001 0.610 60mm 22.205 6.768      
11/16" 1.880 0.573 2 to 1/4" 20.128 6.135      
3/4" 2.237 0.682 2 to 3/8" 22.435 6.838      
      2 to 1/2" 24.856 7.576      
      2 to 5/8" 27.409 8.354      
      2 to 3/4" 30.083 9.169

 

Size Chart of alloy 800 Round Bar
US Bar Metric Japanese Canadian/ASTM
Diameter (Inch) Size of Bar Diameter (milimeter) size of Bar Diameter (milimeter) size of Bar Diameter (milimeter2) size of Bar
0.375 #3 5.5 5.5 10 10 200 15M
0.250 #2 5 5 6 6 100 10M
0.625 #5 7 7 16 16 500 25M
0.500 #4 6 6 13 13 300 20M
0.875 #7 9 9 22 22 1000 35M
0.750 #6 8 8 19 19 700 30M
1.125 #9 11 11 29 29 2500 55M
1.000 #8 10 10 25 25 1500 45M
1.375 #11 14 14 35 35
1.250 #10 12 12 32 32
1.625 #13 18 18 41 41
1.500 #12 16 16 38 38
1.875 #15 22 22 48 48
1.750 #14 20 20 44 44
2.250 #18 28 28 57 57
2.000 #16 25 25 51 51
36 36
32 32
44 44
40 40
50 50

 

Finishes of Inconel UNS N08800 Round Bar
Bright drawn BD Slit rolled edge SRE
Cold drawn CD Polished P
Peeled and turned P&T Rough turned/peeled RT
Cold finished CF Hot rolled pickled and annealed HRAP
Centreless ground CG Hot finished HF
Smooth turned ST reeled and Peeled PR

 

Tolerances chart of Inconel Alloy 800 Round Bar
Section/Shape diameter, Size or width across flats variation Permitted
millimeter millimeter
Flat (thickness) < 18
> 30 ≦ 50
> 18 ≦ 30
> 50 ≦ 80
+ 0 to - 00.110
+ 0 to - 00.250
+ 0 to - 00.130
+ 0 to - 00.350
Square and
hexagon

> 18 ≦ 30
≥ 6 ≦ 18
> 50 ≦ 80
> 30 ≦ 50
> 80 ≦ 105

+ 0 to - 00.110
+ 0 to - 00.090
+ 0 to - 00.160
+ 0 to - 00.130
+ 0 to - 00.250
Round
> 18 ≦ 30
≥6 ≦ 18
> 50 ≦ 80
> 30 ≦ 50
> 80 ≦ 100

+ 0 to - 00.085
+ 0 to - 00.070
+ 0 to - 00.120
+ 0 to - 00.100
+ 0 to - 00.140
Flat (width) < 18
> 30 ≦ 50
> 18 ≦ 30
> 80 ≦ 100
> 50 ≦ 80
> 100 ≦ 130
> 160 ≦ 320
> 130 ≦ 160
+ 0 to - 00.110
+ 0 to - 00.160
+ 0 to - 00.130
+ 0 to - 00.220
+ 0 to - 00.190
+ 0 to - 00.350
+ 1.00 to - 1.00
+ 0 to - 1.00

 

Chemical Composition of 1.4876 Incoloy 800 round bar
Grade C Mn Al Ni Si Cr S Cu Fe
Incoloy 800H 05 to 0.10 1.50 maximum 0.15 to 0.60 30 to 35 1 maximum 19 to 23 015 maximum 0.75 maximum 39.5 minimum
Incoloy 800 0.10 maximum 1.50 maximum 30 to 35 1 maximum 19 to 23 015 maximum 0.75 maximum 39.5 minimum
Incoloy 800HT 06 to 0.10 1.50 maximum 30 to 35 1 maximum 19 to 23 015 maximum 0.75 maximum 39.5 minimum

 

Nickel Alloy 800HT round bar Material Properties
Yield Strength Density Elongation Tensile Strength Melting Point
, MPa – 205, Psi – 30,000 7.94 g/centimeter3 30 % MPa – 520, Psi – 75,000 1385 °C (2525 °F)

 

Equivalent Grade of Incoloy 800 round bar
STANDARD UNS WERKSTOFF NR. OR AFNOR GOST BS JIS EN
Incoloy 800H N08810 1.4958 / 1.4876 XH32T Z8NC33-21 ЭИ670 NA 15(H) NCF 800H X5NiCrAlTi31-20
Incoloy 800 N08800 1.4876 XH32T Z8NC32-21 ЭИ670 NA 15 NCF 800 X10NiCrAlTi32-20
Incoloy 800HT N08811 1.4876/ 1.4859 XH32T - ЭИ670 NA 15(HT) NCF 800HT X8NiCrAlTi32-21