
See Online here Comparision Incoloy 825 tube price with inconel 800 tube price list
Like most high-performance alloys, alloy 825 is useful in applications that concern elevated temperatures. The melting point of Incoloy 825 tubing is higher than alloy 625. The melting point of metal like alloy 825 is 1400°C. Having a higher melting point comes with some benefits. In particular, the necessity for a higher melting point ASME SB423 UNS N08825 Welded Tubing material is a must in industries that have very tight tolerances with regards to the shape of the tube. Usually, elevated temperatures cause deformation of the tube. Since heat melts the metal to some degree, the tolerance levels may be violated.
However, unlike other alloys, the ASTM B423 Incoloy 825 seamless tube, which has a high melting point does not easily get deformed. And so the Alloy 825 ERW Tubes serve elevated temperature applications very well. Another side effect of resistance to high temperature is the lower rate of oxidation. The content of chromium in Inconel 825 high tolerance tubing is high and ranges between 19.5% to 23.5%. Unlike traditional alloys, the inclusion of a higher content of chromium in Incoloy 825 tube gives it fortification against oxidation. Under usual circumstances, the elevation of temperature can cause rapid deterioration of a material by oxidation. The din 2.4858 High Pressure Tube is expressly resistant to highly potent acids such as sulfuric and phosphoric acids.
These acids are predominantly a part of the process industries. And such industries would require highly efficient materials such as the 825 Incoloy Bright Annealed Tube to make up their systems. The use of materials that are vulnerable to corrosion leads to a higher replacement cost. Not to mention the time lost to replace the parts will eat into the profits of the buyers’ production. And so, the Incoloy 825 Decorative Tube is an effective solution, not only because of its superior corrosion resistance properties but also because it provides cost benefits in the long run.
|
Standard |
ASTM, AISI, GB, JIS, customers' requests available |
|
Size |
Round Tube: OD: 16-119mm or customized |
|
Incoloy 825 Tubing Thickness |
0.25mm-3.0mm |
|
Length |
6m or according to customers' request |
|
Incoloy 825 Tubing Sample |
Free sample is available, but freight should be paid by you |
|
Tolerance
|
Outer diameter: ±0.2mm |
|
Thickness: ±0.05mm |
|
|
Length: ±0.5mm |
|
|
Incoloy 825 Tubing Ends |
In plain end or bevelled ends or as your requirements |
|
Welding Line Type |
ERW (Electrical Resistance Weld) |
|
Incoloy 825 Tubing Finishing
|
A. Sanded |
|
B. Gloss #400,Mirror #600 - #1000 |
|
|
C. Brushed |
|
|
D. Wood Grain |
|
|
E. Embossed, Threaded |
|
|
Application |
Decorations, constructions, food industry, etc. |
|
Certification |
ISO, SGS |
|
Round Pipe Size |
16, 17, 18, 19, 20, 21, 22, 23, 25, 28, 31.8, 35, 36, 38.1, 48, 50.8, 60, 63.5, 76.2, 89, 101, 114 mm |
|
Square Pipe Size |
17, 18, 19, 20, 21, 22, 23, 24, 25, 28, 30, 36, 38, 50 mm |
|
Rectangle Pipe Size |
10*30, 10*40, 10*50, 20*10, 23*11, 24*12, 25*13, 28*25, 28*13, 29*14, 30*15, 30*20, 30*22, 34*22, 36*23, 50*25, 60*30, 75*45, 95*45 mm |
|
Incoloy 825 Tubing Thickness |
exact 0.25, 0.28, 0.32, 0.37, 0.41, 0.51, 0.61, 0.71, 0.91, 1.11, 1.15, 1.41 mm |
|
Length |
6m or according to customer’s request |
|
Outer diameter |
6.35-219mm |
|
Incoloy 825 Tubing Tolerance |
Outer diameter :±0.2mm |
|
Thickness :±0.02mm |
|
|
Length :±0.5mm |
|
|
Process method |
Code drawn, annealed with nitrogen protection, ultrasonic, automatic shape, polished |
|
Test |
Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
|
Incoloy 825 Tubing Equipment |
Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc |
|
Origin |
West Europe / Japanese / Indian / USA / Korean / American / European |
|
Incoloy 825 Tubing Test Certificates |
Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| Incoloy 825 | 0.05 max | 1.00 max | 0.05 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Incoloy 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Tube Incoloy 825 Equivalent | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
| Tensile (ksi) | .2% Yield (ksi) |
|---|---|
| 85 | 30-35 |
| Wall Thickness | Incoloy Tube Sizes ( O.D.) |
|---|---|
| .010 | 1/16" , 1/8" , 3/16" |
| .020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
| .012 | 1/8" |
| .016 | 1/8" , 3/16" |
| .028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
| .035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
| .083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
| .095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
| .109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
| .120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
| .125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
| .134 | 1" |
| .250 | 3" |
| .375 | 3 1/2" |
| Incoloy Tube O.D. (in.) |
Wall Thickness of Tube (inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| .028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
| Working Pressure (psig) | ||||||||
| 1/8 | 7900 | 10100 | ||||||
| 1/4 | 3700 | 4800 | 7000 | 9500 | ||||
| 5/16 | 3700 | 5400 | 7300 | |||||
| 3/8 | 3100 | 4400 | 6100 | |||||
| 1/2 | 2300 | 3200 | 4400 | |||||
| 3/4 | 2200 | 3000 | 4000 | 4600 | ||||
| 1 | 2200 | 2900 | 3400 | 3900 | 4300 | |||
| Description | Price Per Unit (INR) | Price in USD |
|---|---|---|
| Tube Incoloy Alloy 825 Size : 1/2 Od,length : 6 Mtr | 9,786 | 131.29 |
| Incoloy 825 Smls Tube To Astm B 423 Gr.uns No.8825 In 4 Mtrs Length,nace Mr-0175size 8mm Od X 1.5 Mm Thk | 1,308 | 17.55 |
| Incoloy 825 Smls Tube To Astm B 423 Gr.uns No.8825 In 5to7 Mtrs Lenth,annealed,nace Mr-0175 Size:1/2odx0.049thk | 1,611 | 21.61 |
| Incoloy 825 Smls Tube To Astm B 423 Gr.uns No.8825 In 5to7 Mtrs Lenth,annealed,nace Mr-0175 Size:3/8odx0.035thk | 1,377 | 18.47 |
| Types of Incoloy 825 Tube | Out diameter (OD) | Wall thickness | Length |
|---|---|---|---|
| NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
| Incoloy 825 Seamless Tube (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
| Incoloy 825 Welded Tube (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
There are some alloys of Inconel that were particularly planned for utilize in welding like TIG. Alloy 825 Tube is most commonly utilized in methods where high heat tolerance is required, Astm B423 UNS N08825 Tube may be a nickel-chromium alloys which is utilized in numerous welding forms. Welding Inconel can be or maybe difficult because the welds that are made have a tendency to split.
| Alloy | Product form | Dimension |
|---|---|---|
| INCOLOY 825 (42 Ni/22 Cr/3 Mo) | Tube; cold drawn, seamless | 12.0 x 1.5 mm |
| INCOLOY 825 (42 Ni/22 Cr/3 Mo) | Tube; cold drawn, seamless | 21.34 x 2.77 mm (½"nb sch40s) |
| INCOLOY 825 (42 Ni/22 Cr/3 Mo) | Tube; cold drawn, seamless | 26.67 x 2.11 mm (¾"nb sch10s) |
| INCOLOY 825 (42 Ni/22 Cr/3 Mo) | Tube; cold drawn, seamless | 88.90 x 3.05 mm (3"nb sch10s) |
| Surface Finish | Internal Surface(ID) | Exterbal Surface(OD) | |||
| Roughness Average(RA) | Roughness Average(RA) | ||||
| μ inch | μm | μ inch | μm | ||
| MP | Mechanical Polish | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| AP | Annealed & Pickled | Not defined | Not defined | 40 or Not defined | 1.0 or Not defined |
| EP | Electro Polish | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
| BA | Beight Annealed | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
|
|
Tell us what you need — we'll get back within a few hours.
