According to ASTM B167, the Inconel 600 tube, which falls under the nickel alloy category can be supplied in any of the following conditions i.e. - cold worked annealed, hot worked annealed, or they could be hot-finished.
Intended to be used for general corrosion resistance and heat resistant applications, the Inconel 600 seamless tubing is ideally considered for use in industries such as chemical and food processing equipment, paper mills, heat exchangers.In a chemical processing plant, the Inconel 600 seamless tube is one such alloy that is capable of exhibiting excellent behaviour. In fact, it is the balance of chemistry that sees to the alloys corrosion resistance properties.
Individually, both chromium and nickel have excellent corrosion resistance properties, but with the unique combination in terms of chemistry makes the ASTM B167 UNS N06600 tube well suited to be used not only in oxidative conditions but also in those conditions where reductive reactions are prominent. Not forgetting to mention the thermal processing industry, the Inconel 600 tubing finds use in application where resistance to oxidation is required.
Further, this type of industries has furnace atmospheres prevalent. In such an atmosphere, the Alloy 600 tubing can thrive but not becoming susceptible to creep. In addition to this, the Alloy 600 tube is also seen in nitriding applications due to its resistance to nitrogen at high temperatures.
before buy from india Compare Inconel 600 tube price with inconel 625 tube price list
Avoid welded tubes even its a cheaper option, always use Inconel 600 seamless Tubing For Boilers, Heat Exchangers and Gas lines.
Description | Per Unit (INR) | Price in USD |
---|---|---|
Nickel Alloy Seamless Tube Inconel 600 (Ni-74.30%, Cr-15.69%) | 1,403 | 18.83 |
(Nickel Alloy Seamless Tubes) Inconel Alloy 600 Seamless Cold Drawn Tubes.bright Annealed.asme Sb167 Uns N06600 | 10,982 | 147.36 |
Alloy 600 tubing
Size: 6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk.
ASTM / ASME Standard | ASTM B163/ ASME SB163, ASTM B516 / ASME SB 516 |
Available Sizes |
6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk. |
Tube Standard | ASTM, ASME and API |
Available Tube Schedule | SCH80, SCH20, SCH60, SCH80, SCH30, SCH140, SCH160, STD, SCH120, XS, XXS, SCH40, |
Various Type | LSAW /Seamless/ Fabricated /ERW/Welded Tubes |
Basic Form | Hydraulic, Square, Rectangular, Round etc |
Length of Tube | Cut Length, Double Random, Single Random etc |
Types of Tube End | Threaded, Plain End, Beveled End, |
Grade | Elongation (% in 50mm) min | Strength of Yield 0.2% Proof (MPa) minimum | Strength of Tensile (MPa) minimum | Pipe Hardness | |
Rockwell B (HR B) maximum | Brinell (HB) maximum | ||||
600 | 40 | Psi – 45,000 , MPa – 310 | Psi – 95,000 , MPa -655 | – | – |
Grade | C | Mn | Si | Fe | S | Cr | Cu | Ni | |
600 | min. | – | – | – | 6.0 | – | 14.0 | – | 72.0 |
max. | 0.15 | 1.0 | 0.5 | 10.0 | 0.015 | 17.0 | 0.5 | – |
Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
BS | En | No | AFNOR | ||||
600 | N06600 | NA 13 | NiCr15Fe | 2.4816 | NC15FE11M | МНЖМц 28-2,5-1,5 | NCF 600 |
Tubing Material | General Application | Recommended Temperature Range |
---|---|---|
Inconel Alloy 600 Tubing | Recommended for High Temperature Applications with Generally Corrosive Media - | -205°F to 1200°F (-130°C to 650°C) |
Material | Type | ASTM Tubing Specifications | Condition | Max. Recommended Hardness |
---|---|---|---|---|
Inconel Alloy 600 Tube Inconel 600 Tubing |
600 | ASTM B-167 | Fully Annealed | 90 Rb |
Types of Inconel 600 Tube | Out diameter (OD) | Wall thickness | Length |
---|---|---|---|
NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
Inconel 600 Seamless Tube (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
Inconel 600 Welded Tube (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
Alloy | Product form | Dimension |
---|---|---|
INCONEL 600 (75 Ni/16 Cr) | Tube; cold drawn, seamless, annealed | 1.5 x 0.25 mm |
Tube; cold drawn, seamless, annealed | 2.0 x 0.5 mm | |
Tube; seamless | 3.0 x 0.4 mm | |
Tube; cold drawn, annealed, seamless | 3.0 x 0.5 mm | |
Tube; cold drawn, annealed, seamless | 4.0 x 0.25 mm | |
Tube; cold drawn, seamless, annealed | 4.0 x 0.5 mm | |
Tube; seamless, annealed | 4.0 x 1.0 mm | |
Tube; seamless, cold drawn | 4.5 x 0.5 mm | |
Tube; cold drawn, seamless, annealed | 5.0 x 0.5 mm | |
Tube; annealed, seamless | 5.0 x 1.0 mm | |
Tube; seamless, hard drawn | 5.0 x 1.0 mm | |
Tube; seamless, annealed | 6.0 x 0.5 mm | |
Tube; on coil, seamless, annealed | 6.0 x 1.0 mm | |
Tube; cold drawn, seamless, annealed | 6.0 x 1.0 mm | |
Tube; hard drawn, seamless | 6.0 x 1.5 mm | |
Tube; seamless, annealed | 6.35 x 1.63 mm (¼" x 0.064") | |
Tube; seamless, seamless, annealed | 8.0 x 1.0 mm | |
Tube; cold drawn, annealed, seamless | 10.0 x 1.0 mm | |
Tube; seamless | 10.0 x 2.0 mm | |
Tube; cold drawn, annealed, pickled | 12.7 x 1.7 mm (½" x 0.065") | |
Tube; seamless, annealed | 13.72 x 1.65 mm (¼"nb Sch10s) | |
Tube; seamless, cold drawn, pickled, annealed | 14.0 x 3.0 mm | |
Tube; cold drawn, annealed, pickled | 15.0 x 1.5 mm | |
Tube; cold drawn, annealed | 15.8 x 1.7 mm (5/8" x 0.065") | |
Tube; cold drawn, annealed, pickled | 18.0 x 2.0 mm | |
Tube; cold drawn, pickled, annealed | 21.34 x 1.65 mm (½"nb Sch5) | |
Tube; cold drawn, pickled, annealed | 21.34 x 2.11 mm (½"nb Sch10s) | |
Tube; cold drawn, annealed, pickled | 21.34 x 2.77 mm (½"nb sch40s) | |
Tube; cold drawn, annealed, pickled, seamless | 25.4 x 1.65 mm (1" x 0.065") | |
Tube; cold drawn, seamless, annealed, pickled | 26.67 x 2.11 mm (¾"nb Sch10s) | |
Tube; cold drawn, annealed, pickled | 26.67 x 2.87 mm (¾"nb sch40s) | |
Tube; cold drawn, pickled, annealed | 26.67 x 3.91 mm (¾"nb Sch80s) | |
Tube; cold drawn, annealed, pickled | 30.0 x 2.5 mm | |
Tube; cold drawn, seamless, pickled, annealed | 33.4 x 2.77 mm (1"nb Sch10s) | |
Tube; cold drawn, seamless, annealed, pickled | 33.4 x 3.38 mm (1"nb Sch40s) | |
Tube; cold drawn, pickled, annealed | 33.4 x 4.55 mm (1"nb Sch80s) | |
Tube; cold drawn, seamless, pickled, annealed | 42.16 x 1.65 mm (1¼"nb sch5s) | |
Tube; cold drawn, seamless, annealed, pickled | 42.16 x 3.56 mm (1¼"nb Sch40s) | |
Tube; cold finished, seamless, annealed | 48.26 x 2.77 mm (1½"nb Sch10s) | |
Tube; cold finished, seamless, annealed | 48.26 x 3.68 mm (1½"nb Sch40s) | |
Tube; seamless, cold drawn, annealed, pickled | 53.5 x 3.0 mm | |
Tube; cold drawn, pickled, annealed | 60.33 x 2.77 mm (2"nb sch10s) | |
Tube; cold drawn, pickled, annealed | 60.33 x 3.91 mm (2"nb sch40s) | |
Tube; seamless, cold drawn, pickled, annealed | 66.0 x 4.0 mm | |
Tube; seamless, cold drawn, pickled, annealed | 76.2 x 3.3 mm | |
Tube; seamless, cold drawn, pickled, annealed | 88.9 x 3.05 mm (3"nb sch10s) | |
Tube; seamless, cold drawn, pickled, annealed | 88.9 x 5.49 mm (3"nb sch40s) | |
Tube; cold drawn, pickled, annealed | 114.3 x 3.05 mm (4"nb sch10s) | |
Tube; cold drawn, pickled, annealed | 114.3 x 6.02 mm (4"nb sch40s) | |
Tube; extruded, pickled, annealed | 141.3 x 6.55 mm (5"nb sch40s) | |
Tube; extruded, pickled, annealed | 153.0 x 6.5 mm | |
Tube; seamless, extruded, pickled, annealed | 168.28 x 7.11 mm (6"nb sch40s) |
Outside Diameter And Wall Thickness (Mm): 1.59 X 0.36
Grade | Maximum internal pressure, ksi |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|
100°F | 200°F | 300°F | 400°F | 500°F | 600°F | 700°F | Comments | |||
N06600 :1 | 8.02 | 8.02 | 8.02 | 8.02 | 8.02 | 8.02 | 8.02 | B167 OD>5" and hotworked | ||
N06600 :2 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | B167 OD<=5" and hotworked + OD>5" and coldworked | ||
N06600 :3 | 11.19 | 11.19 | 11.19 | 11.19 | 11.19 | 11.19 | 11.19 | B167 OD<=5" and coldworked |
Selected wall tolerance: ±10%
Outside Diameter And Wall Thickness (Mm): 6 X 1
Grade | Maximum internal pressure, ksi |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|
100°F | 200°F | 300°F | 400°F | 500°F | 600°F | 700°F | Comments | |||
N06600 :1 | 392 | 392 | 392 | 392 | 392 | 392 | 392 | B167 OD>5" and hotworked | ||
N06600 :2 | 470 | 470 | 470 | 470 | 470 | 470 | 470 | B167 OD<=5" and hotworked + OD>5" and coldworked | ||
N06600 :3 | 547 | 547 | 547 | 547 | 547 | 547 | 547 | B167 OD<=5" and coldworked |
Selected wall tolerance: ±10%
Outside Diameter And Wall Thickness (Mm): 8 X 1
Grade | Maximum internal pressure, ksi |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|
100°F | 200°F | 300°F | 400°F | 500°F | 600°F | 700°F | Comments | |||
N06600 :1 | 284 | 284 | 284 | 284 | 284 | 284 | 284 | B167 OD>5" and hotworked | ||
N06600 :2 | 340 | 340 | 340 | 340 | 340 | 340 | 340 | B167 OD<=5" and hotworked + OD>5" and coldworked | ||
N06600 :3 | 397 | 397 | 397 | 397 | 397 | 397 | 397 | B167 OD<=5" and coldworked |
|
|
UNS: | N06600 |
Specifications: | ASTM B167, ASTM B829, ASTM B517, ASTM B775, ASTM B163, ASTM B516, ASTM B751, AMS 5580 |
international Specifications: | BS 3072-3076 (NA14) DIN 17742, DIN 17750, DIN 17754 WERKSTOFF Nr 2.4816 TÜV 305 AFNOR-NC 15 Fe |
Surface Finish | Internal Surface(ID) | Exterbal Surface(OD) | |||
Roughness Average(RA) | Roughness Average(RA) | ||||
μ inch | μm | μ inch | μm | ||
EP | Electro Polish | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
AP | Annealed & Pickled | Not defined | Not defined | 40 or Not defined | 1.0 or Not defined |
MP | Mechanical Polish | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
BA | Beight Annealed | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
Physical Properties | Metric | English |
---|---|---|
Melting Point | 1354 - 1413 °C | 2470 - 2580 °F |
NI027100 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:1.0mm, Wall Thickness:0.3mm, Inside Diameter:0.4mm, Temper:As Drawn |
NI027150 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:1.5mm, Wall Thickness:0.25mm, Inside Diameter:1mm |
NI027200 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:1.96mm, Wall Thickness:0.37mm, Inside Diameter:1.22mm |
NI027221 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:2.1mm, Wall Thickness:0.2mm, Inside Diameter:1.7mm |
NI027225 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:2.5mm, Wall Thickness:0.25mm, Inside Diameter:2.0mm |
NI027230 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:3.02mm, Wall Thickness:0.26mm, Inside Diameter:2.5mm |
NI027231 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:3.0mm, Wall Thickness:0.5mm, Inside Diameter:2.0mm, Temper:Annealed |
NI027350 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:6.15mm, Wall Thickness:0.5mm, Inside Diameter:5.15mm, Temper:Annealed |
NI027351 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:6.0mm, Wall Thickness:1mm, Inside Diameter:4.0mm, Temper:Annealed |
NI027410 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:7.8mm, Wall Thickness:0.65mm, Inside Diameter:6.5mm, Temper:Annealed |
NI027420 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:8.0mm, Wall Thickness:1.0mm, Inside Diameter:6mm, Temper:Annealed |
NI027450 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:9.5mm, Wall Thickness:1.7mm, Inside Diameter:6.1mm, Temper:Annealed |
NI027500 | Inconel® alloy 600 - Heat Resisting Alloy Tube, Outside Diameter:12.7mm, Wall Thickness:1.63mm, Inside Diameter:9.44mm, Temper:Annealed |
Alloy | Temper | Tensile Strength KSI | Yield Strength KSI | Minimum Elongation in 2" (%) | Rockwell Hardness* |
---|---|---|---|---|---|
600 | Annealed Half Hard Full Hard |
110 max. 110-130 130 min. |
35-55 55-95 95 min. |
30 13 4 |
B 90 max. B 93 - C 20 C 20 min. |
GRADE |
APPROXIMATE SURFACE FEET PER MINUTE |
RELATIVE SPEED BASED ON C-1212 |
---|---|---|
600 |
50 |
22 |