Monel alloys are amongst the most resilient ones, especially when it comes to being used in marine engineering based applications. Because of the very high percentage of copper in the monel round bar, it has the ability to resist corrosion when immersed in brine solutions or in applications that have salts of sodium chloride. On any given day, the percentage of salt in water bodies (oceans & seas) amounts to approximately 3.5% of its weight. Salt solutions are often corrosive, but it is the content of chlorine in salt that makes it an issue for metals.
In metals that undergo passivation, the chlorine bites into the passivated layer and promotes the formation of rust. Yet, because of the addition of copper in the alloy, Monel round bar suppliers recommend its use across several marine based applications. Copper, in combination with nickel in the alloy, forms a formidable alloy. In rapidly flowing water, the Monel square bar exhibits corrosion rates that are very low. In comparison to conventional stainless steel alloys such as grade 304, the Monel hex bar would fare better in marine environments.
Since salt is a hygroscopic substance, it attracts as well as retains high levels of moisture. Water retention on the surface of metals causes corrosion. But since the alloy has resistance to salt sprays, the Monel flat bar will thrive in marine environments. Other properties associated with the use of Monel rod is its resistance to both bio-fouling and MIC or otherwise known as microbially induced corrosion.
Before buy compare Monel Round Bar price with inconel round bar price list
Dimensions | DIN, EN, ASTM, JIS, ASME, BS, AISI |
---|---|
Round bar size | Diameter: 3-~800mm |
Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Billet Size | 1/2 to 495mm Diameter |
Rectangles Size | 33 x 30mm to 295 x 1066mm |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Dimensions | Diameter / Height: |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished |
Condition | Hardened & tempered, annealed |
Technique | Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod |
Processing | Bar cutting to 650mm |
Form | Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc. |
Description | Per Unit (INR) | Price in USD | Price in EURO |
---|---|---|---|
Nickel Copper Round Bar Grade Niclal 400(Monel 400) Dia 12.2x 3500 Mm(As Per Inv & P/list) | 1,069 | 14.50 | 11.96 |
Nickel Alloy Round Bars Grade Monel 400 Uns N04400 | 869 | 11.79 | 9.72 |
Nickel Alloy Round Bars Grade Monel 400 Uns N04400 | 869 | 11.79 | 9.72 |
Monel 400 Round Bars (Goods For Re-export, No Ex Bonding Allowed) | 37,404 | 507.48 | 418.44 |
Monel 400 Round Bars (Goods For Re-export, No Ex Bonding Allowed) | 106,270 | 1441.82 | 1188.84 |
Nickel Copper Round Bars (Monel 400) Dia. 14.28 X 3000mm H12 | 1,254 | 17.01 | 14.03 |
Nickel Copper Round Bars Grade Niclal 400 (Monel 400) Dia.12.2x3500mm (As Per Invoice & P/list) | 1,190 | 16.15 | 13.31 |
Nickel Alloy Round Bars Grade Monel [ Ni-65%, Cu- 32% ] | 447 | 6.06 | 5.00 |
Nickel Alloy Round Bars Grade Monel [ Ni-65%, Cu- 32% ] | 447 | 6.06 | 5.00 |
Round Bar Niclal 400 Diam 12.2x3500mm H12 (Monel 400 Astm B-164) | 1,212 | 16.44 | 13.56 |
Metric | US Bar | ASTM/ Canadian | Japanese | ||||
---|---|---|---|---|---|---|---|
Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.625 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
Shape / Section | Size, diameter or width across flats | Permitted variation |
mm | mm | |
Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
Flat (thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
Flat (width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
Square and hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |
Diameter | Diameter | Weight | Density |
---|---|---|---|
1/4 inches | 0.25 inches6.35 mm | 0.187 lbs/ft0.2782934 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
9/32 inches | 0.281 inches7.1374 mm | 0.237 lbs/ft0.3527034 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
5/16 inches | 0.312 inches7.9248 mm | 0.293 lbs/ft0.4360426 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
11/32 inches | 0.343 inches8.7122 mm | 0.354 lbs/ft0.5268228 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
3/8 inches | 0.375 inches9.525 mm | 0.421 lbs/ft0.6265322 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
13/32 inches | 0.406 inches10.3124 mm | 0.495 lbs/ft0.736659 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
7/16 inches | 0.437 inches11.0998 mm | 0.574 lbs/ft0.8542268 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
15/32 inches | 0.468 inches11.8872 mm | 0.649 lbs/ft0.9658418 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
1/2 inches | 0.5 inches12.7 mm | 0.749 lbs/ft1.1146618 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
17/32 inches | 0.531 inches13.4874 mm | 0.846 lbs/ft1.2590172 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
9/16 inches | 0.562 inches14.2748 mm | 0.948 lbs/ft1.4108136 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
19/32 inches | 0.593 inches15.0622 mm | 1.06 lbs/ft1.577492 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
5/8 inches | 0.625 inches15.875 mm | 1.17 lbs/ft1.741194 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
21/32 inches | 0.656 inches16.6624 mm | 1.29 lbs/ft1.919778 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
11/16 inches | 0.687 inches17.4498 mm | 1.42 lbs/ft2.113244 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
23/32 inches | 0.718 inches18.2372 mm | 1.55 lbs/ft2.30671 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
3/4 inches | 0.75 inches19.05 mm | 1.690 lbs/ft2.515058 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
25/32 inches | 0.781 inches19.8374 mm | 1.83 lbs/ft2.723406 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
13/16 inches | 0.812 inches20.6248 mm | 1.98 lbs/ft2.946636 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
27/32 inches | 0.843 inches21.4122 mm | 2.13 lbs/ft3.169866 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
7/8 inches | 0.875 inches22.225 mm | 2.29 lbs/ft3.407978 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
29/32 inches | 0.906 inches23.0124 mm | 2.46 lbs/ft3.660972 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
15/16 inches | 0.937 inches23.7998 mm | 2.63 lbs/ft3.913966 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
31/32 inches | 0.968 inches24.5872 mm | 2.81 lbs/ft4.181842 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
1 inches | 1 inches25.4 mm | 3.00 lbs/ft4.4646 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
Specifications: |
ASTM B164, AMS 4675, AMS 4730, AMS 4731 |
International Specifications: |
QQ-N-281 , BS3076NA13, DIN 17753, VdTUV 263 |
|
|
hex bar Size in Inches |
hex bar Wt per Ft |
hex bar Wt per 12′ |
---|---|---|
3/16″ |
0.104 |
1.248 |
1/4″ |
0.180 |
2.160 |
5/16″ |
0.290 |
3.480 |
3/8″ |
0.625 |
4.920 |
7/16″ |
0.560 |
6.72 |
1/2″ |
0.740 |
8.880 |
9/16″ |
0.930 |
11.16 |
5/8″ |
1.150 |
13.80 |
11/16″ |
1.390 |
16.68 |
3/4″ |
1.660 |
19.92 |
13/16″ |
1.950 |
23.40 |
7/8″ |
2.300 |
27.60 |
15/16″ |
2.625 |
31.20 |
1″ |
2.90 |
34.80 |
1-1/16″ |
3.30 |
39.60 |
1-1/8″ |
3.700 |
44.40 |
1-1/4″ |
4.625 |
55.20 |
1-5/16″ |
5.100 |
61.20 |
1-3/8″ |
5.625 |
67.20 |
1-7/16″ |
6.100 |
73.20 |
1-1/2″ |
6.625 |
79.20 |
1-5/8″ |
7.800 |
93.60 |
1-3/4″ |
9.030 |
108.36 |
1-7/8″ |
10.400 |
124.80 |
2″ |
11.80 |
141.60 |
2-1/4″ |
14.920 |
179.04 |
2-3/8″ |
16.920 |
203.04 |
2-1/2″ |
18.42 |
221.04 |
3″ |
26.53 |
318.36 |
Monel Flat bar – metric sizes and weights |
|||
---|---|---|---|
Flat Size |
KG’s per Metre |
Standard Length (metres) |
Colour Code |
10 x 3 |
0.24 |
6.0 |
Blue |
13 x 3 |
0.31 |
6.0 |
Blue |
13 x 5 |
0.46 |
6.0 |
Orange |
16 x 3 |
0.38 |
6.0 |
Blue |
16 x 5 |
0.64 |
6.0 |
Orange |
16 x 8 |
1.03 |
6.0 |
Red |
20 x 3 |
0.48 |
6.0 |
Blue |
20 x 5 |
0.81 |
6.0 |
Orange |
20 x 6 |
0.97 |
6.0 |
White |
20 x 10 |
1.61 |
6.0 |
Yellow |
25 x 3 |
0.60 |
6.0 |
Blue |
25 x 5 |
1.01 |
6.0 |
Orange |
25 x 6 |
1.21 |
6.0 |
White |
25 x 8 |
1.61 |
6.0 |
Red |
25 x 10 |
2.01 |
6.0 |
Yellow |
25 x 12 |
2.41 |
6.0 |
Pink |
32 x 3 |
0.77 |
6.0 |
Blue |
32 x 5 |
1.29 |
6.0 |
Orange |
32 x 6 |
1.55 |
6.0 |
White |
32 x 8 |
2.06 |
6.0 |
Red |
32 x 10 |
2.58 |
6.0 |
Yellow |
32 x 12 |
3.09 |
6.0 |
Pink |
40 x 3 |
0.97 |
6.0 |
Blue |
40 x 5 |
1.61 |
6.0 |
Orange |
40 x 6 |
1.93 |
6.0 |
White |
40 x 8 |
2.58 |
6.0 |
Red |
40 x 10 |
3.22 |
6.0 |
Yellow |
40 x 12 |
3.86 |
6.0 |
Pink |
40 x 16 |
5.15 |
6.0 |
Grey |
40 x 20 |
6.14 |
6.0 |
Green |
50 x 3 |
1.21 |
6.0 |
Blue |
50 x 5 |
2.01 |
6.0 |
Orange |
50 x 6 |
2.41 |
6.0 |
White |
50 x 8 |
3.22 |
6.0 |
Red |
50 x 10 |
4.02 |
6.0 |
Yellow |
50 x 12 |
4.83 |
6.0 |
Pink |
50 x 16 |
6.44 |
6.0 |
Grey |
50 x 20 |
8.05 |
6.0 |
Green |
50 x 25 |
10.1 |
6.0 |
Purple |
65 x 3 |
1.57 |
6.0 |
Blue |
65 x 5 |
2.62 |
6.0 |
Orange |
65 x 6 |
3.14 |
6.0 |
White |
65 x 8 |
4.18 |
6.0 |
Red |
65 x 10 |
5.23 |
6.0 |
Yellow |
65 x 12 |
6.28 |
6.0 |
Pink |
65 x 16 |
8.37 |
6.0 |
Grey |
65 x 20 |
10.5 |
6.0 |
Green |
65 x 25 |
13.1 |
6.0 |
Purple |
75 x 5 |
3.02 |
6.0 |
Orange |
75 x 6 |
3.62 |
6.0 |
White |
75 x 8 |
4.83 |
6.0 |
Red |
75 x 10 |
6.04 |
6.0 |
Yellow |
75 x 12 |
7.24 |
6.0 |
Pink |
75 x 16 |
9.66 |
6.0 |
Grey |
75 x 20 |
12.1 |
6.0 |
Green |
75 x 25 |
15.1 |
6.0 |
Purple |
75 x 40 |
24.1 |
6.0 |
Yellow |
90 x 5 |
3.62 |
6.0 |
Orange |
90 x 6 |
4.35 |
6.0 |
White |
90 x 8 |
5.79 |
6.0 |
Red |
90 x 10 |
7.24 |
6.0 |
Yellow |
90 x 12 |
8.69 |
6.0 |
Pink |
100 x 5 |
4.02 |
6.0 |
Orange |
100 x 6 |
4.83 |
6.0 |
White |
100 x 8 |
6.44 |
6.0 |
Red |
100 x 10 |
8.05 |
6.0 |
Yellow |
100 x 12 |
9.66 |
6.0 |
Pink |
100 x 16 |
12.9 |
6.0 |
Grey |
100 x 20 |
16.1 |
6.0 |
Green |
100 x 25 |
20.1 |
6.0 |
Purple |
100 x 50 |
40.2 |
6.0 |
Green |
110 x 6 |
5.31 |
6.0 |
White |
110 x 8 |
7.08 |
6.0 |
Red |
110 x 10 |
8.85 |
6.0 |
Yellow |
110 x 12 |
10.6 |
6.0 |
Pink |
130 x 5 |
5.23 |
6.0 |
Orange |
130 x 6 |
6.28 |
6.0 |
White |
130 x 8 |
8.37 |
6.0 |
Red |
130 x 10 |
10.5 |
6.0 |
Yellow |
130 x 12 |
12.6 |
6.0 |
Pink |
130 x 16 |
16.7 |
6.0 |
Grey |
130 x 20 |
20.9 |
6.0 |
Green |
130 x 25 |
26.2 |
6.0 |
Purple |
150 x 5 |
6.04 |
6.0 |
Orange |
150 x 6 |
7.24 |
6.0 |
White |
150 x 8 |
9.66 |
6.0 |
Red |
150 x 10 |
12.1 |
6.0 |
Yellow |
150 x 12 |
14.5 |
6.0 |
Pink |
150 x 16 |
19.3 |
6.0 |
Grey |
150 x 20 |
24.1 |
6.0 |
Green |
150 x 25 |
30.1 |
6.0 |
Purple |
150 x 50 |
60.4 |
6.0 |
Green |
180 x 5 |
7.24 |
6.0 |
Orange |
180 x 6 |
8.69 |
6.0 |
White |
180 x 10 |
14.5 |
6.0 |
Yellow |
180 x 12 |
17.4 |
6.0 |
Pink |
180 x 16 |
23.2 |
6.0 |
Grey |
180 x 20 |
29.0 |
6.0 |
Green |
180 x 25 |
36.2 |
6.0 |
Purple |
200 x 6 |
9.66 |
6.0 |
White |
200 x 8 |
12.9 |
6.0 |
Red |
200 x 10 |
16.1 |
6.0 |
Yellow |
200 x 12 |
19.3 |
6.0 |
Pink |
200 x 16 |
25.7 |
6.0 |
Grey |
200 x 20 |
32.2 |
6.0 |
Green |
200 x 25 |
40.3 |
6.0 |
Purple |
250 x 6 |
12.1 |
6.0 |
White |
250 x 8 |
16.1 |
6.0 |
Red |
250 x 10 |
20.1 |
6.0 |
Yellow |
250 x 12 |
24.1 |
6.0 |
Pink |
250 x 16 |
32.2 |
6.0 |
Grey |
250 x 20 |
40.2 |
6.0 |
Green |
250 x 25 |
50.3 |
6.0 |
Purple |
300 x 6 |
14.5 |
6.0 |
White |
300 x 8 |
19.3 |
6.0 |
Red |
300 x 10 |
24.1 |
6.0 |
Yellow |
300 x 12 |
29.0 |
6.0 |
Pink |
300 x 16 |
38.6 |
6.0 |
Grey |
300 x 20 |
48.3 |
6.0 |
Green |
300 x 25 |
60.4 |
6.0 |
Purple |
They are cleaned to guarantee faultless and completely straight surfaces. Monel Precision Ground Bar excessively known as 'Turned Ground and Polished' screwing, alludes to adjust bars made with fine accuracy and top notch steel.Monel Round bar is open in various assorted distances across reaching out from 1/4" up to 24", Monel Round bar is accurately as it sounds; a long, round and empty metal bar.
|
|
CD | Cold drawn | P | Polished |
BD | Bright drawn | SRE | Slit rolled edge |
CG | Centreless ground | HF | Hot finished |
CF | Cold finished | HRAP | Hot rolled annealed and pickled |
P&T | Peeled and turned | RT | Rough turned/peeled |
ST | Smooth turned | PR | Peeled and reeled |
H&T | Hardened and tempered. |
ANN | Annealed |
PH | Precipitation hardened. |
Metric | US Bar | ASTM/ Canadian | Japanese | ||||
---|---|---|---|---|---|---|---|
Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.600 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.600 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
Round Bar | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
2-1/2" | 7.576 | 24.856 | ||||||
2-5/8" | 8.354 | 27.409 | ||||||
2-3/4" | 9.169 | 30.083 |
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
Monel 400 |
2.4360 |
N04400 |
NW 4400 |
NA 13 |
МНЖМц 28-2,5-1,5 |
NU-30M |
NiCu30Fe |
Monel K500 |
2.4375 |
N05500 |
– |
– |
– |
– |
– |
Designation | C% | Co% | Cr% | Mo% | Ni% | V% | W% | Ai% | Cu% | Nb/Cb Ta% | Ti% | Fe% | Sonstige Autres-Other % |
Monel 400 | 0.12 | - | - | - | 65.0 | - | - | - | 32.0 | - | - | 1.5 | Mn 1.0 |
Monel 401 | 0.10 | - | - | - | 43.0 | - | - | - | 53.0 | - | - | 0.75 | Si 0.25; Mn 2.25 |
Monel 404 | 0.15 | - | 52.0-57.0 | - | - | 0.05 | rest/bal | - | - | 0.50 | Mn 0.10; Si 0.10;S o.024 | ||
Monel 502 | 0.10 | - | - | - | 63.0-17.0 | - | - | 2.5-3.5 | rest/bal | - | 0.50 | 2.0 | Mn 1.5;Si 0.5; S 0.010 |
Monel K 500 | 0.13 | - | - | - | 64.0 | - | - | 2.8 | 30.0 | - | 0.6 | 1.0 | Mn 0.8 |
Monel R 405 | 0.15 | - | - | - | 66.0 | - | - | - | 31.0 | - | - | 1.2 | Mn 1.0; S 0.04 |
Tensile strength, Ultimate | 550 Mpa |
Tensile strength, Yield | 240 Mpa |
Elongation at Break | 48% |
UNS N04400 Monel 400 Rectangular Bars | UNS 4400 Monel Polished Bars Stock |
Monel 400 Square Bars Bright | Monel 400 Grade Bright Bars Cold Drawn |
ASTM B164 Alloy 400 Square Bars Annealed | Monel 400 UNS N04400 Bright Bars Flat |
Monel 2.4360 Threaded Bars M16 | Monel 400 Threaded Rods |
Alloy 400 Monel 2.4360 Rectangular Bars Cold Drawn | Werkstoff 2.4360 Monel Polished Square Bars |
Monel 2.4360 Rectangular Bars Polished | Monel ASTM B164 Polished Round Bars |
2.4360 Monel 400 Threaded Bars M12 | Monel 400 ASTM B164 Threaded Bars Stock |
Monel UNS N04400 Square Bars | UNS N04400 Monel 400 Polished Flat Bars |
2.4360 Monel 400 Rectangular Bars Bright | Monel Grade 400 Bright Bars Hollow |