A common sight in the construction and repair industry, a SS 316 hex bolt is contemplated to be ideal for projects involving docks, highway structures, bridges, and buildings. A hex bolt is a SS 316 fasteners that can be used as a headed anchor bolt.
Usually, the UNS s31600 bolt tends to have excellent resistance not only to seawater and brine, but also to freshwater and to chlorine water as well. Hence, this Hex shaped ASTM A193 grade 316 bolts are a very useful accessory in the building of bridges, especially those that are to be built across water bodies.Looped at one end, the SS 316 eye bolt is used to firmly attach a securing eye to a structure, after which either a rope or a cable could then be tied to it. Typically the construction of a Machinery eye bolt includes a fully threaded, which could have a collar.
Thus, eye bolts, as a fastener tend to be well suited for use with loads up to an angle of 45°. However, as one of the leading ss 316 nut bolt manufacturer in India, we do not recommend using an eye bolt without a shoulder for angular loads. Non-serrated flange bolts are often referred to as frame bolts. The circular flange present under the head of the ss316 flange bolt acts like a washer, which in turn aids to distribute the load.
compare 316 Stainless Steel Fasteners price with Stainless Steel 304 Fasteners price list
SS 316 bolts and nuts tensile strength is 550 MPa in metric and 79800 psi in English. AISI 316 Bolt torque vary based on sizes. so check torque chart before buying material.
Stainless Steel 316 Bolts
Size:3/6" to 2" | M3 to M56 or Custom Sizes
Grades and Specifications | ASTM A 193/ ASME SA 193 |
Manufacturing Standard | all International Standards and ASTM, DIN, BS |
Sizes | 3/6" to 2" | M3 to M56 or Custom Sizes Available as per requirement |
Length | 3 mm to 200 mm |
Fasteners Type | Lag Bolts, Square nuts, U bolts, Hex Head nuts, Eye nuts, Lock nuts, T nuts, Eye bolts, wing nuts, Counter sunk Bolts, Coupling Nuts, Square Bolts, Panel Nuts, Hex Bolt, Acorn Nuts, T bolt, Dome nuts, Hex Head Bolts |
METRIC SIZE | A1/ A2/ A4-50 (N) | A1/ A2/ A4-70 (N) | A1/ A2/ A4-80 (N) |
---|---|---|---|
M3 | 2515 | 3521 | 4024 |
M3.5 | 3390 | 4646 | 5424 |
M4 | 4390 | 6146 | 7024 |
M5 | 7100 | 9940 | 11360 |
M6 | 10050 | 14070 | 16080 |
M7 | 14450 | 20230 | 23120 |
M8 | 18300 | 25620 | 29280 |
M10 | 29000 | 40600 | 46400 |
M12 | 42150 | 59010 | 67440 |
M14 | 57500 | 80500 | 92000 |
M16 | 78500 | 109900 | 125600 |
M18 | 96000 | 134400 | 153600 |
M20 | 122500 | 171500 | 196000 |
M22 | 151500 | 212100 | 242400 |
M24 | 176500 | 247100 | 282400 |
M27 | 229500 | 321300 | 367200 |
M30 | 280500 | 392700 | 448800 |
M33 | 408500 | 571900 | 653600 |
M36 | 408500 | 571900 | 653600 |
M39 | 488000 | 683200 | 780800 |
Description | Per Unit (INR) | Price in USD | Price in EURO |
---|---|---|---|
Anchor Bolt M24x350 P82-197-202 Ss316(Api) | 285 | 3.87 | 3.19 |
Spares Assembly Of Autoclave:stirrer Clamp Bolt-a-1l/2l/5l M6x20mm Lg Aup0246 Ss316 With(-)minus Screw Driver Slot | 263 | 3.57 | 2.94 |
Anchor Bolt M12x150 P82-197-213 Ss316(Api) | 285 | 3.87 | 3.19 |
Compo.of Cool.tower,u Bolt M6 76-41350-300 Ss316 W/two Nuts(Hex Nut M6-1.0is1364ss316)& Two Washers Ss316(Sc M6 Ss316) | 195 | 2.64 | 2.18 |
Machinery Spares Assembly Of Autoclave stirrer Clamp Bolt A Il/2l/5l M6 X 20 Mm Lg Aup0246 Ss316 | 241 | 3.27 | 2.70 |
Machinery Spares Assembly Of Autoclave :stirrer Clamp Bolt A-1l/2l/5l M6 X 20mmlg Aup 0246 Ss316 With Minus Screw Dri | 251 | 3.40 | 2.81 |
Various Spares For Salt Refinery Plant Ss-316 Nut-bolt 5/8 X3 | 62 | 0.84 | 0.69 |
Cooling Towers Spares Ss-316 Bolt Nut With Washers | 605 | 8.20 | 6.77 |
Fabricated Chemical Plant And Equipments with Blades , Couplings & Bolt/nuts1no. Pilot Reactor R-101 2 Kl Moc Ss 316 | 736,726 | 9991.09 | 8249.19 |
Sc-4-18-ss-coolers In Ss Steam Equipments With Parker Fittings Bolts Must Be 316ss Lubricate The Treads With Molycote Or | 71,400 | 968.29 | 799.47 |
Torque Specifications |
|||||||
---|---|---|---|---|---|---|---|
Bolt Size
Inches or # |
Threads
Per Inch |
Standard Dry Torque in Inch-Pounds
|
|||||
304
Stainless Steel |
316
Stainless Steel |
||||||
#2 |
56 |
2.5 |
2.6 |
||||
64 |
3.0 |
3.2 |
|||||
#3 |
48 |
3.9 |
4.0 |
||||
56 |
4.4 |
4.6 |
|||||
#4 |
40 |
5.2 |
5.5 |
||||
48 |
6.6 |
6.9 |
|||||
#5 |
40 |
7.7 |
8.1 |
||||
44 |
9.4 |
9.8 |
|||||
#6 |
32 |
9.6 |
10.1 |
||||
40 |
12.1 |
12.7 |
|||||
#8 |
32 |
19.8 |
20.7 |
||||
36 |
22.0 |
23.0 |
|||||
#10 |
24 |
22.8 |
23.8 |
||||
32 |
31.7 |
33.1 |
|||||
Bolt Size
Inches or # |
Threads
Per Inch |
Standard Dry Torque in Inch-Pounds
|
|||||
304
Stainless Steel |
316
Stainless Steel |
||||||
1/4 |
20 |
75.2 |
78.8 |
||||
28 |
94.0 |
99.0 |
|||||
5/16 |
18 |
132 |
138 |
||||
24 |
142 |
147 |
|||||
3/8 |
16 |
236 |
247 |
||||
24 |
259 |
271 |
|||||
7/16 |
14 |
376 |
393 |
||||
20 |
400 |
418 |
|||||
1/2 |
13 |
517 |
542 |
||||
20 |
541 |
565 |
|||||
Bolt Size
Inches or # |
Threads
Per Inch |
Standard Dry Torque in Inch-Pounds
|
|||||
304
Stainless Steel |
316
Stainless Steel |
||||||
9/16 |
12 |
682 |
713 |
||||
18 |
752 |
787 |
|||||
5/8 |
11 |
1110 |
1160 |
||||
18 |
1244 |
1301 |
|||||
3/4 |
10 |
1530 |
1582 |
||||
16 |
1490 |
1558 |
|||||
7/8 |
9 |
2328 |
2430 |
||||
14 |
2318 |
2420 |
|||||
1 |
8 |
3440 |
3595 |
||||
14 |
3110 |
3250 |
|||||
Bolt Size
Inches or # |
Threads
Per Inch |
Standard Dry Torque in Foot-Pounds
|
|||||
304
Stainless Steel |
316
Stainless Steel |
||||||
1 1/8 |
7 |
413 |
432 |
||||
12 |
390 |
408 |
|||||
1 1/4 |
7 |
523 |
546 |
||||
12 |
480 |
504 |
|||||
1 1/2 |
6 |
888 |
930 |
||||
12 |
703 |
732 |
Diameter | SS 304 Studs | |
---|---|---|
Plain | ||
UNC | 8UN | |
1/2 | 19568 | - |
5/8 | 19569 | - |
3/4 | 19570 | |
7/8 | 19571 | - |
1 | 19572 | - |
11/8 | 19573 | 13979 |
11/4 | 19574 | 13980 |
13/8 | 19656 | 13981 |
11/2 | 19657 | 13982 |
13/4 | 19658 | 13983 |
2 | 19659 | 13984 |
Available in 12" lengths ASME B18.31.3, 2014 Also available in 6" lengths Dimensions |
NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNESS | ACROSS THE FLATS | ACROSS BOLTS CORNERS | ||||
---|---|---|---|---|---|---|---|---|
D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
The UNS S31600 Bolts are made up of the 316 austenitic stainless steel. The material is a chromium nickel molybdenum alloy. Unlike the 304 grade of stainless steel, the 316 stainless steel has molybdenum added to the composition and has resistance to chloride ion corrosion stress cracking. The salt water contains sodium chloride in ionized form. Since the marine and sea water applications are in chloride ion rich environment, the applications would require chloride ion resisting material. as the UNS S31600 Bolts are made up of 316 chloride ion corrosion resistant material, they are better for fastening options in marine applications.
Nominal Size or Basic Major Thread Diameter |
F |
G |
H |
||||||
Width Across Flats |
Width Across Corners |
Thickness |
|||||||
Basic |
Max |
Min |
Max |
Min |
Basic |
Max |
Min |
||
1/4 |
.2500 |
1/2 |
.500 |
.488 |
.577 |
.556 |
15/64 |
.250 |
.218 |
5/16 |
.3125 |
9/16 |
.562 |
.546 |
.650 |
.622 |
19/64 |
.314 |
.280 |
3/8 |
.3750 |
11/16 |
.688 |
.669 |
.794 |
.763 |
23/64 |
.377 |
.341 |
7/16 |
.4375 |
3/4 |
.750 |
.728 |
.866 |
.830 |
27/64 |
.441 |
.403 |
1/2 |
.5000 |
7/8 |
.875 |
.850 |
1.010 |
.969 |
31/64 |
.504 |
.464 |
9/16 |
.5625 |
15/16 |
.938 |
.909 |
1.083 |
1.037 |
35/64 |
.568 |
.526 |
5/8 |
.6250 |
1-1/16 |
1.062 |
1.031 |
1.227 |
1.175 |
39/64 |
.631 |
.587 |
3/4 |
.7500 |
1-1/4 |
1.250 |
1.212 |
1.443 |
1.382 |
47/64 |
.758 |
.710 |
7/8 |
.8750 |
1-7/16 |
1.438 |
1.394 |
1.660 |
1.589 |
55/64 |
.885 |
.833 |
1 |
1.0000 |
1-5/8 |
1.325 |
1.575 |
1.876 |
1.796 |
63/64 |
1.012 |
.956 |
1-1/8 |
1.1250 |
1-13/16 |
1.812 |
1.756 |
2.093 |
2.002 |
1-7/64 |
1.139 |
1.079 |
1-1/4 |
1.2500 |
2 |
2.000 |
1.938 |
2.309 |
2.209 |
1-7/32 |
1.251 |
1.187 |
1-3/8 |
1.3750 |
2-3/16 |
2.188 |
2.119 |
2.526 |
2.416 |
1-11/32 |
1.378 |
1.460 |
1-1/2 |
1.5000 |
2-3/8 |
2.375 |
2.300 |
2.742 |
2.622 |
1-15/32 |
1.505 |
1.433 |
1-5/8 |
1.6250 |
2-9/16 |
2.562 |
2.481 |
2.959 |
2.828 |
1-19/32 |
1.632 |
1.556 |
1-3/4 |
1.7500 |
2-3/4 |
2.750 |
2.662 |
3.175 |
3.035 |
1-23/32 |
1.759 |
1.679 |
2 |
2.0000 |
3-1/8 |
3.125 |
3.025 |
3.608 |
3.449 |
1-31/32 |
2.013 |
1.925 |
2-1/4 |
2.2500 |
3-1/2 |
3.500 |
3.388 |
4.041 |
3.862 |
2-13/64 |
2.251 |
2.155 |
2-1/2 |
2.5000 |
3-7/8 |
3.875 |
3.750 |
4.474 |
4.275 |
2-29/64 |
2.505 |
2.401 |
2-3/4 |
2.7500 |
4-1/4 |
4.250 |
4.112 |
4.907 |
4.688 |
2-45/64 |
2.759 |
2.647 |
3 |
3.0000 |
4-5/8 |
4.625 |
4.475 |
5.340 |
5.102 |
2-61/64 |
3.013 |
2.893 |
3-1/4 |
3.2500 |
5 |
5.000 |
4.838 |
5.774 |
5.515 |
3-3/16 |
3.252 |
3.124 |
3-1/2 |
3.5000 |
5-3/8 |
5.375 |
5.200 |
6.207 |
5.928 |
3-7/16 |
3.506 |
3.370 |
3-3/4 |
3.7500 |
5-3/4 |
5.750 |
5.562 |
6.640 |
6.341 |
3-11/16 |
3.670 |
3.616 |
4 |
4.0000 |
6-1/8 |
6.125 |
5.925 |
7.073 |
6.755 |
3-15/16 |
4.014 |
3.862 |
Property |
Value |
Density |
8.00 g/cm3 |
Melting Point |
1400°C |
Modulus of Elasticity |
193 GPa |
Electrical Resistivity |
0.74 x 10-6 Ω.m |
Thermal Conductivity |
16.3 W/m.K |
Thermal Expansion |
15.9 x 10-6/K |
NOMINAL SIZE (D) |
BODY DIAMETER |
HEAD THICKNESS |
ACROSS THE FLATS |
ACROSS BOLTS CORNERS |
||||
---|---|---|---|---|---|---|---|---|
D (MAX) |
D (MIN) |
H (MAX) |
H (MIN) |
F (MAX) |
F (MIN) |
C (MAX) |
C (MIN) |
|
m10 |
10.00 |
9.78 |
6.63 |
6.17 |
17.00 |
15.73 |
18.48 |
17.77 |
m12 |
12.00 |
11.73 |
7.76 |
4.24 |
19.00 |
17.73 |
20.78 |
20.03 |
m14 |
14.00 |
13.73 |
9.09 |
8.51 |
22.00 |
20.67 |
24.25 |
23.35 |
m16 |
16.00 |
15.73 |
10.32 |
9.68 |
24.00 |
23.67 |
27.71 |
26.75 |
m20 |
20.00 |
19.67 |
12.88 |
12.12 |
30.00 |
29.16 |
34.64 |
32.95 |
m24 |
24.00 |
23.67 |
15.44 |
14.56 |
36.00 |
35.00 |
41.57 |
39.55 |
m30 |
30.00 |
29.67 |
19.48 |
17.92 |
46.00 |
45.00 |
53.12 |
50.85 |
m36 |
36.00 |
35.61 |
23.38 |
21.63 |
55.00 |
53.80 |
63.51 |
60.79 |
m42 |
42.00 |
41.38 |
26.97 |
25.03 |
65.00 |
62.90 |
75.06 |
71.71 |
m48 |
48.00 |
47.38 |
31.07 |
28.93 |
75.00 |
72.60 |
86.60 |
82.76 |
m56 |
56.00 |
55.26 |
36.2 |
33.80 |
85.00 |
82.20 |
98.15 |
93.71 |
m64 |
64.00 |
63.26 |
41.32 |
38.68 |
95.00 |
91.80 |
109.70 |
104.65 |
m72 |
72.00 |
71.26 |
46.45 |
43.55 |
105.00 |
101.40 |
121.24 |
115.60 |
m80 |
80.00 |
79.26 |
51.58 |
48.42 |
115.00 |
111.00 |
132.72 |
126.54 |
m90 |
90.00 |
89.13 |
57.74 |
54.26 |
130.00 |
125.50 |
150.11 |
143.07 |
m100 |
90.00 |
99.13 |
63.9 |
60.10 |
145.00 |
140.00 |
167.43 |
159.60 |
Table B3 SQUARE BOLT DIMENSIONS |
||||||||
---|---|---|---|---|---|---|---|---|
Bolt Size | A (max) | B | C (min) | D | E | F Thread Length for Bolt Length |
||
max | min | 6" and shorter |
over 6" | |||||
1/4" | 0.260 | 3/8 | 0.498 | 11/64 | 0.03 | 0.01 | 0.750 | 1.000 |
5/16" | 0.324 | 1/2 | 0.665 | 13/64 | 0.03 | 0.01 | 0.875 | 1.125 |
3/8" | 0.388 | 9/16 | 0.747 | 1/4 | 0.03 | 0.01 | 1.000 | 1.250 |
7/16" | 0.452 | 5/8 | 0.828 | 19/64 | 0.03 | 0.01 | 1.125 | 1.375 |
1/2" | 0.515 | 3/4 | 0.995 | 21/64 | 0.03 | 0.01 | 1.250 | 1.500 |
5/8" | 0.642 | 15/16 | 1.244 | 27/64 | 0.06 | 0.02 | 1.500 | 1.750 |
3/4" | 0.768 | 1-1/8 | 1.494 | 1/2 | 0.06 | 0.02 | 1.750 | 2.000 |
7/8" | 0.895 | 1-5/16 | 1.742 | 19/32 | 0.06 | 0.02 | 2.000 | 2.250 |
1" | 1.022 | 1-1/2 | 1.991 | 21/32 | 0.09 | 0.03 | 2.250 | 2.500 |
1-1/8" | 1.149 | 1-11/16 | 2.239 | 3/4 | 0.09 | 0.03 | 2.500 | 2.750 |
1-1/4" | 1.277 | 1-7/8 | 2.489 | 27/32 | 0.09 | 0.03 | 2.750 | 3.000 |
1-3/8" | 1.404 | 2-1/16 | 2.738 | 29/32 | 0.09 | 0.03 | 3.000 | 3.250 |
1-1/2" | 1.531 | 2-1/4 | 2.986 | 1 | 0.09 | 0.03 | 3.250 | 3.500 |
**All measurements in millimeters**
Nominal Size or Basic Major Thread Diameter |
F |
G |
H |
||||||
Width Across Flats |
Width Across Corners |
Thickness |
|||||||
Basic |
Max |
Min |
Max |
Min |
Basic |
Max |
Min |
||
1/4 |
.2500 |
7/16 |
.438 |
.428 |
.505 |
.488 |
7/32 |
.226 |
.212 |
5/16 |
.3125 |
1/2 |
.500 |
.489 |
.577 |
.557 |
17/64 |
.273 |
.258 |
3/8 |
.3750 |
9/16 |
.562 |
.551 |
.650 |
.628 |
21/64 |
.337 |
.479 |
7/16 |
.4375 |
11/16 |
.688 |
.675 |
.794 |
.768 |
3/8 |
.385 |
.365 |
1/2 |
.5000 |
3/4 |
.750 |
.736 |
.866 |
.840 |
7/16 |
.448 |
.427 |
9/16 |
.5625 |
7/8 |
.875 |
.861 |
1.010 |
.982 |
31/64 |
.496 |
.473 |
5/8 |
.6250 |
15/16 |
.938 |
.922 |
1.083 |
1.051 |
35/64 |
.559 |
.535 |
3/4 |
.7500 |
1-1/8 |
1.125 |
1.088 |
1.299 |
1.240 |
41/64 |
.665 |
.617 |
7/8 |
.8750 |
1-5/16 |
1.312 |
1.269 |
1.516 |
1.447 |
3/4 |
.776 |
.724 |
1 |
1.0000 |
1-1/2 |
1.500 |
1.450 |
1.732 |
1.653 |
55/64 |
.887 |
.831 |
1-1/8 |
1.1250 |
1-11/16 |
1.688 |
1.631 |
1.949 |
1.859 |
31/32 |
.999 |
.939 |
1-3/8 |
1.3750 |
2-1/16 |
2.062 |
1.994 |
2.382 |
2.273 |
1-11/64 |
1.206 |
1.138 |
1-1/2 |
1.500 |
2-1/4 |
2.250 |
2.175 |
2.598 |
2.480 |
1-9/32 |
1.ASTM A194 GR. 8 |
1.245 |
1-5/8 |
1.6250 |
2-7/16 |
2.438 |
2.356 |
2.815 |
2.686 |
1-25/64 |
1.429 |
1.353 |
1-3/4 |
1.7500 |
2-5/8 |
2.625 |
2.538 |
3.031 |
2.893 |
1-1/2 |
1.540 |
1.460 |
2 |
2.0000 |
3 |
3.000 |
2.900 |
3.464 |
3.306 |
1-23/32 |
1.763 |
1.675 |
2-1/4 |
2.2500 |
3-3/8 |
3.375 |
3.263 |
3.897 |
3.719 |
1-15/16 |
1.986 |
1.890 |
2-1/2 |
2.5000 |
3-3/4 |
3.750 |
3.625 |
4.330 |
4.133 |
2-5/32 |
2.209 |
2.105 |
2-3/4 |
2.7500 |
4-1/8 |
4.125 |
3.988 |
4.763 |
4.546 |
2-3/8 |
2.431 |
2.319 |
Washer Size | A | B | C | Weight (lbs.) Per 100 Pieces |
---|---|---|---|---|
ID | OD | Thickness | ||
1/2 | 9/16 | 13/8 | 0.109 | 4 |
5/8 | 11/16 | 13/4 | 0.134 | 8 |
3/4 | 13/16 | 2 | 0.148 | 11 |
7/8 | 15/16 | 21/4 | 0.165 | 15 |
1 | 11/16 | 21/2 | 0.165 | 19 |
11/8 | 11/4 | 23/4 | 0.165 | 22 |
11/4 | 13/8 | 3 | 0.165 | 26 |
13/8 | 11/2 | 31/4 | 0.180 | 33 |
11/2 | 15/8 | 31/2 | 0.180 | 38 |
15/8 | 13/4 | 33/4 | 0.180 | 43 |
13/4 | 17/8 | 4 | 0.180 | 50 |
17/8 | 2 | 41/4 | 0.180 | 57 |
2 | 21/8 | 41/2 | 0.180 | 63 |
21/4 | 23/8 | 43/4 | 0.220 | 83 |
21/2 | 25/8 | 5 | 0.238 | 96 |
23/4 | 27/8 | 51/4 | 0.259 | 110 |
3 | 31/8 | 51/2 | 0.284 | 130 |
Diameter | M12 | M16 | M20 | M22 | M24 | M27 | M30 | M36 |
---|---|---|---|---|---|---|---|---|
Length | ||||||||
30 | 49.1 | |||||||
35 | 53.6 | |||||||
40 | 58.0 | 105 | ||||||
45 | 62.1 | 113 | 188 | |||||
50 | 66.6 | 121 | 200 | 257 | ||||
55 | 71.0 | 129 | 212 | 272 | ||||
60 | 75.4 | 137 | 225 | 286 | 362 | |||
65 | 79.9 | 145 | 237 | 301 | 380 | |||
70 | 84.3 | 153 | 249 | 316 | 398 | 532 | ||
75 | 88.8 | 160 | 262 | 331 | 415 | 554 | 701 | |
80 | 93.2 | 168 | 274 | 346 | 433 | 576 | 728 | |
85 | 97.6 | 176 | 286 | 361 | 451 | 599 | 756 | 1184 |
90 | 102 | 184 | 298 | 375 | 467 | 621 | 784 | 1224 |
95 | 107 | 192 | 310 | 390 | 485 | 644 | 812 | 1264 |
100 | 199 | 322 | 405 | 503 | 665 | 838 | 1304 | |
105 | 207 | 335 | 420 | 520 | 688 | 865 | 1336 | |
110 | 215 | 347 | 435 | 538 | 710 | 893 | 1376 | |
115 | 223 | 359 | 450 | 556 | 732 | 921 | 1415 | |
120 | 231 | 372 | 465 | 574 | 755 | 949 | 1455 | |
125 | 239 | 384 | 479 | 591 | 777 | 976 | 1495 | |
130 | 247 | 396 | 494 | 609 | 800 | 1004 | 1535 | |
135 | 409 | 509 | 627 | 822 | 1032 | 1575 | ||
140 | 421 | 524 | 645 | 845 | 1059 | 1615 | ||
145 | 433 | 539 | 662 | 867 | 1087 | 1655 | ||
150 | 446 | 554 | 680 | 890 | 1115 | 1695 | ||
155 | 458 | 569 | 698 | 912 | 1143 | 1735 | ||
160 | 584 | 716 | 935 | 1170 | 1775 | |||
165 | 599 | 733 | 957 | 1198 | 1815 | |||
170 | 751 | 979 | 1226 | 1855 | ||||
175 | 769 | 1002 | 1254 | 1895 | ||||
180 | 787 | 1024 | 1281 | 1935 | ||||
185 | 804 | 1047 | 1309 | 1974 | ||||
190 | 822 | 1069 | 1337 | 2014 | ||||
195 | 840 | 1092 | 1365 | 2054 | ||||
200 | 1114 | 1392 | 2094 |
Nut Size (mm) |
Diameter* (mm) |
Height (mm) |
||
---|---|---|---|---|
Hex Nut |
Jam Nut |
Nylock Nut |
||
2 |
4 |
1.6 |
1.2 |
- |
2.5 |
5 |
2 |
1.6 |
- |
3 |
5.5 |
2.4 |
1.8 |
4 |
4 |
7 |
3.2 |
2.2 |
5 |
5 |
8 |
4 |
2.7 |
5 |
6 |
10 |
5 |
3.2 |
6 |
7 |
11 |
5.5 |
3.5 |
- |
8 |
13 |
6.5 |
4 |
8 |
10 |
17 |
8 |
5 |
10 |
12 |
19 |
10 |
6 |
12 |
14 |
22 |
11 |
7 |
14 |
16 |
24 |
13 |
8 |
16 |
18 |
27 |
15 |
9 |
18.5 |
20 |
30 |
16 |
10 |
20 |
* This is the diameter across the flats. It is also the size of wrench to use. |
Hexagon Bolt / Set Screws |
Stud Bolt |
Hexagon Nuts |
Socket Capscrews |
---|---|---|---|
DIN 931 |
BS4882 |
DIN 934 |
DIN 912 |
DIN 933 |
DIN 976 |
BS 1768 |
DIN 6912 |
BS 1768 |
BS 1769 |
DIN 7984 |
|
UNI 5731 |
BS 1083 |
ANSI B18.3 |
|
UNI 5739 |
BS 3692 |
ISO 4762 |
|
ISO 4014 |
ISO 4032 |
UNI 5931 |
|
ISO 4017 |
ISO 4033 |
BS 2470 |
|
BS 1769 |
ANSI B18.2.2 |
BS 4168 |
|
BS 3692 |
|||
ANSI B18.2.1 |
Socket & Slotted Set Screws |
Socket & Slotted Countersunk Screws |
Studs |
Washers |
---|---|---|---|
DIN 913 |
DIN 963 |
DIN 938 |
DIN 125 |
DIN 914 |
DIN 7991 |
DIN 939 |
DIN 9021 |
HEAVY HEX BOLT DIMENSIONS | ||||||||
---|---|---|---|---|---|---|---|---|
Bolt Size | A (max) | B | C (min) | D | E | F Thread Length for Bolt Length |
||
max | min | 6" and shorter |
over 6" | |||||
1/2" | 0.515 | 7/8 | 0.969 | 11/32 | 0.03 | 0.01 | 1.250 | 1.500 |
5/8" | 0.642 | 1-1/16 | 1.175 | 27/64 | 0.06 | 0.02 | 1.500 | 1.750 |
3/4" | 0.768 | 1-1/4 | 1.383 | 1/2 | 0.06 | 0.02 | 1.750 | 2.000 |
7/8" | 0.895 | 1-7/16 | 1.589 | 37/64 | 0.06 | 0.02 | 2.000 | 2.250 |
1" | 1.022 | 1-5/8 | 1.796 | 43/64 | 0.09 | 0.03 | 2.250 | 2.500 |
1-1/8" | 1.149 | 1-13/16 | 2.002 | 3/4 | 0.09 | 0.03 | 2.500 | 2.750 |
1-1/4" | 1.277 | 2 | 2.209 | 27/32 | 0.09 | 0.03 | 2.750 | 3.000 |
1-3/8" | 1.404 | 2-3/16 | 2.416 | 29/32 | 0.09 | 0.03 | 3.000 | 3.250 |
1-1/2" | 1.531 | 2-3/8 | 2.622 | 1 | 0.09 | 0.03 | 3.250 | 3.500 |
1-3/4" | 1.785 | 2-3/4 | 3.035 | 1-5/32 | 0.12 | 0.04 | 3.750 | 4.000 |
2" | 2.039 | 3-1/8 | 3.449 | 1-11/32 | 0.12 | 0.04 | 4.250 | 4.500 |
2-1/4" | 2.305 | 3-1/2 | 3.862 | 1-1/2 | 0.19 | 0.06 | 4.750 | 5.000 |
2-1/2" | 2.559 | 3-7/8 | 4.275 | 1-21/32 | 0.19 | 0.06 | 5.250 | 5.500 |
2-3/4" | 2.827 | 4-1/4 | 4.688 | 1-13/16 | 0.19 | 0.06 | 5.750 | 6.000 |
3" | 3.081 | 4-5/8 | 5.102 | 2 | 0.19 | 0.06 | 6.250 | 6.500 |
Grade | Elongation (% in 50mm) min | Strength of Yield 0.2% Proof (MPa) minimum | Strength of Tensile (MPa) minimum | Pipe Hardness | |
Rockwell B (HR B) maximum | Brinell (HB) maximum | ||||
316 | 40 | 205 | 515 | 95 | 217 |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
316 | min. | – | – | – | – | – | 16.0 | 2.0 | 10.0 | – |
max. | 0.08 | 2.0 | 0.75 | 0.045 | 0.03 | 18.0 | 3.0 | 14.0 | 0.10 |
Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
BS | En | No | Name | ||||
316 | S31600 | 304S11 | 58E | 1.4401 | X5CrNiMo17-12-2 | 2347 | SUS 316 |