oldest ASTM A249 Tp316l Welded and ERW Tubing Manufacturer, Wide size range in UNS S31603 Heat exchanger Tube, find updated Price

Stainless Steel 316l Seamless Round Tubing

 

316l Stainless Steel Tube Suppliers, Don't forget to check DIN 1.4404 Coiled Tubing Dimensions and Weight Chart

From being the second most employed stainless steel alloy, grade 316 and its variations are referred to as marine grade steel. The 316l Stainless Steel Tube Seamless variety is useful in high pressured applications, solely because the load bearing capacity of this type is almost 20% higher. The absence of a seamline on the longitudinal section of the Stainless Steel 316l Seamless Round Tubing drastically eliminates the occurrence of intergranular corrosion.

And since this alloy is a low carbon version, the odds of intergranular corrosion are even lower in the Stainless Steel 316L Seamless Tube. Normally, in the high carbon version of any austenitic stainless steel, the spare carbon atoms form precipitates on the grain boundary and cause intergranular decay, when the grain boundary is sensitized. As with several low carbon austenitic 300 series stainless steel, the addition of nitrogen brings about a change in the mechanical characteristics of the ASTM A213 TP 316L Instrumentation Tube. For instance, nitrogen brings about an increase in the yield strength of the material.

When the carbon content of the SS 316L Cold Rolled Coiled Tubing is lowered, it tends to see a reduction in its tensile properties, including its yield strength. Nitrogen when present in this alloy makes up for the lack of yield strength in the WERKSTOFF NR. 1.4404 Heat exchanger Tube. In fact, it has austenite stabilizing properties, while also increasing the resistance of the alloy to pitting. Pitting is a common problem for grade 304, especially in marine environments. Therefore, it is recommended to use ASTM A249 TP 316L Welded Tube for marine engineering purposes. In particular, the pitting resistance against highly corrosive solutions such as phosphoric acid and acetic acid is an outstanding property of the SS 316L ERW Tubing. Along with being able to withstand a 20% phosphoric acid solution, the UNS S31603 U Tube proves itself as a valuable resource in sulfur-containing applications as well.

Comapre price of 316l Stainless Steel Tube with 304 stainless steel tube price list

 

 

ASTM A 213 316L Stainless Steel Tube Specification List

Standard

ASTM, AISI, GB, JIS, customers' requests available

316L Stainless Steel Tube Size

Round Tube: OD: 16-119mm or customized

Thickness

0.25mm-3.0mm

316L Stainless Steel Tube Length

6m or according to customers' request

Sample

Free sample is available, but freight should be paid by you

316L Stainless Steel Tube Tolerance

Outer diameter: ±0.2mm

Thickness: ±0.05mm

Length: ±0.5mm

Ends

In plain end or bevelled ends or as your requirements

Welding Line Type

ERW (Electrical Resistance Weld)

316L Stainless Steel Tube Finishing

A. Sanded

B. Gloss #400,Mirror #600 - #1000

C. Brushed

D. Wood Grain

E. Embossed, Threaded

Application

Decorations, constructions, food industry, etc.

316L Stainless Steel Tube Certification

ISO, SGS

Round Pipe Size

16, 17, 18, 19, 20, 21, 22, 23, 25, 28, 31.8, 35, 36, 38.1, 48, 50.8, 60, 63.5, 76.2, 89, 101, 114 mm

Square Pipe Size

17, 18, 19, 20, 21, 22, 23, 24, 25, 28, 30, 36, 38, 50 mm

Rectangle Pipe Size

10*30, 10*40, 10*50, 20*10, 23*11, 24*12, 25*13, 28*25, 28*13, 29*14, 30*15, 30*20, 30*22, 34*22, 36*23, 50*25, 60*30, 75*45, 95*45 mm

316L Stainless Steel Tube Thickness

exact 0.25, 0.28, 0.32, 0.37, 0.41, 0.51, 0.61, 0.71, 0.91, 1.11, 1.15, 1.41 mm

Length

6m or according to customer’s request

316L Stainless Steel Tube Outer diameter

6.35-219mm

Tolerance

Outer diameter :±0.2mm

Thickness :±0.02mm

Length :±0.5mm

316L Stainless Steel Tube Process method

Code drawn, annealed with nitrogen protection, ultrasonic, automatic shape, polished

Test

Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector

316L Stainless Steel Tube Equipment

Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc

Origin

West Europe / Japanese / Indian / USA / Korean / American / European

316L Stainless Steel Tube Test Certificates

Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report

 

Packaging of ASTM A249 TP 316L Welded Tube
Packaging of ASTM A249 TP 316L Welded Tube
ss 316l tubing packaging

 

Sizes Range of SA 213 TP 316L Stainless Steel Tube
  • Size: 1/2" OD - 12" OD
  • OD: 3.00 - 219.10 mm
  • Thickness : 0.40 - 12.70 mm
  • Length: Single, Double Random & Cut Length

 

NPS
Designator
Outside Diameter Nominal Wall Thickness
in. mm Schedule 5SA Schedule 10SA Schedule 40SA Schedule 80SA
in. mm in. mm in. mm in. mm
8 8.625 219.08 0.109 2.77 0.148 3.76 0.322 8.18 0.500 12.70
10 10.750 273.05 0.134 3.40 0.165 4.19 0.365 9.27 0.500B 12.70B
12 12.750 323.85 0.156 3.96 0.180 4.57 0.375B 9.52B 0.500B 12.70B
14 14.000 355.60 0.156 3.96 0.188B 4.78B
16 16.000 406.40 0.165 4.19 0.188B 4.78B
18 18.000 457.20 0.165 4.19 0.188B 4.78B
20 20.000 508.00 0.188 4.78 0.188B 4.78B
22 22.000 558.80 0.188 4.78 0.218B 5.54B
24 24.000 609.60 0.218 5.54 0.250 6.35
30 30.000 762.00 0.250 6.35 0.312 7.92

 

316l Stainless Steel Tube Seamless price
Description Per Unit (INR) Price in USD Price in EURO
Defective Stainless Steel Seamless Pipe/tube Bright Annealeda269 316l Grade 141 1.92 1.58
Tht-3r60-12.7-1.65 Fl-60-6000- Astm Asme A/sa213aw A269, Sandvik 3r60, Tp316l, Seamless Stainless Steel Tube, (360 Mtr) 1,105 15.02 12.35
Tht-3r60-25.40-3.20 Fl-25-6000- Astm Asme A/sa213aw A269, Sandvik 3r60, Tp316l, Seamless Stainless Steel Tube, (150 Mtr 915 12.44 10.23
Stainless Steel Seamless Tube-spec:sa 213 Tp304/304l Size:o.d.19.05mm X W.t.1.65mm X L:27416mm (Qty:15736.80 Mtrs)(Cold 407 5.53 4.55
Stainless Steel Seamless Tube 12.7mmod X 1mm Less Than 2.5 Grade Ss 316l (Pcs 2100) 504 6.85 5.63
Stainless Steel Seamless Tube 12.7mmod X 1mm Less Than 2.5 Grade Ss 316l 504 6.85 5.63
Stainless Steel Seamless Tube-spec:sa 213 Tp304/304l Size:o.d.19.05mm X W.t.1.65mm X L:16187mm (Qty:17595.30 Mtrs)(Cold 359 4.88 4.01
Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) 203 2.76 2.27
Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) 210 2.85 2.35
Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) 195 2.65 2.18
Seamless Stainless Steel Hot Finish Pipes / Tube Tp 316l (Od Not Less Than 42 Mm) 209 2.84 2.34
Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) 194 2.64 2.17
Seamless Stainless Steel Tube/pipe(Hot Finished)(Od Not Less Than 42mm) Grade-tp316l-size-42.2*3.56 Length-10-11.8 196 2.66 2.19
Seamless Stainless Steel Hot Finish Pipes / Tube Tp 316l (Od Not Less Than 42 Mm) 203 2.76 2.27
Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) 192 2.61 2.15
Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) 201 2.73 2.25
Seamless Stainless Steel Tube/pipe(Hot Finished)(Od Not Less Than 42mm) Grade-tp316l-size-42.2*2.77 Length-10-11.8 196 2.66 2.19
Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) 202 2.75 2.26
Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) 212 2.88 2.37
Stainless Steel Seamless Tube/pipes Cold Finish & Bright Annealed Grade 316l, A213/a269 546 7.42 6.10

 

buy directly from manufacturer of WERKSTOFF NR. 1.4404 Heat exchanger Tube online and save cost, check Specification

 

Stainless Steel 316L ERW Tubing Test Method
SS 316L ERW Tubing Test Method
  • Flaring test
  • Micro test
  • Mechanical test and  flattening test
  • Chemical test
  • Macro test
  • IGC test and hardness test
  • It is like PMI test

 

UNS S31603 Square tubing sizes
Square Tubing- Nominal Size Wall Thickness Weight per Ft.
1 1/2x1 1/2-3.35# 1 1/2 x 1 1/2 in 0.1875 in 3.35 lb
1 1/2x1 1/2-3.71# 1 1/2 x 1 1/2 in 0.2500 in 3.71 lb
2x2-4.32# 2 x 2 in 0.1875 in 4.32 lb
2x2-5.41# 2 x 2 in 0.2500 in 5.41 lb
2 1/2x2 1/2-5.59# 2 1/2 x 2 1/2 in 0.1875 in 5.59 lb
2 1/2x2 1/2-7.11# 2 1/2 x 2 1/2 in 0.2500 in 7.11 lb
2 1/2x2 1/2-8.94# 2 1/2 x 2 1/2 in 0.3125 in 8.94 lb
3x3-6.87# 3 x 3 in 0.1875 in 6.87 lb
3x3-8.81# 3 x 3 in 0.2500 in 8.81 lb
3x3-10.58# 3 x 3 in 0.3125 in 10.58 lb
3x3-12.51# 3 x 3 in 0.3750 in 12.51 lb
3 1/2x3 1/2-8.15# 3 1/2 x 3 1/2 in 0.1875 in 8.15 lb
3 1/2x3 1/2-10.51# 3 1/2 x 3 1/2 in 0.2500 in 10.51 lb
3 1/2x3 1/2-12.70# 3 1/2 x 3 1/2 in 0.3125 in 12.70 lb
3 1/2x3 1/2-15.46# 3 1/2 x 3 1/2 in 0.3750 in 15.46 lb
4x4-9.42# 4 x 4 in 0.1875 in 9.42 lb
4x4-12.21# 4 x 4 in 0.2500 in 12.21 lb
4x4-14.83# 4 x 4 in 0.3125 in 14.83 lb
4x4-17.27# 4 x 4 in 0.3750 in 17.27 lb
4x4-21.63# 4 x 4 in 0.5000 in 21.63 lb
4 1/2x4 1/2-10.70# 4 1/2 x 4 1/2 in 0.1875 in 10.70 lb
4 1/2x4 1/2-13.91# 4 1/2 x 4 1/2 in 0.2500 in 13.91 lb
5x5-11.97# 5 x 5 in 0.1875 in 11.97 lb
5x5-15.62# 5 x 5 in 0.2500 in 15.62 lb
5x5-19.08# 5 x 5 in 0.3125 in 19.08 lb

 

Types of SA 213 Gr 316L Tubing
316L Stainless Steel Tube

316L Stainless Steel Tube

Stainless Steel 316L Seamless Tubes

Stainless Steel 316L Seamless Tube

316L Stainless Steel Round Tube

316L Stainless Steel Round Tube

Stainless Steel 316L Welded Tube

Stainless Steel 316L Welded Tube

316L stainless steel capillary tube

316L stainless steel capillary tube

ASTM A213 TP 316L Rectangular Tube

ASTM A213 TP 316L Rectangular Tube

SA 213 TP 316L Stainless Steel Condenser Tube

SA 213 TP 316L Stainless Steel Condenser Tube

SS 316L High Precision Tube

Stainless Steel 316L High Precision Tube

 

pressure rating of Stainless Steel 316l Seamless Round Tubing
OD inches Ave. Wall inches Min Yield Strength (PSI) Min Tensile Strength (PSI) Theoretical Burst Pressure * (PSI) Working Pressure (PSI) 25% of Burst Theoretical Yield Point ** (PSI) Collapse Pressure *** (PSI)
0.250 0.020 30,000 75,000 14,286 3,571 5,714 4,416
0.250 0.028 30,000 75,000 21,649 5,412 8,660 5,967
0.250 0.035 30,000 75,000 29,167 7,292 11,667 7,224
0.250 0.049 30,000 75,000 48,355 12,089 19,342 9,455
0.250 0.065 30,000 75,000 81,250 20,313 32,500 11,544
0.375 0.020 30,000 75,000 8,955 2,239 3,582 3,029
0.375 0.028 30,000 75,000 13,166 3,292 5,266 4,145
0.375 0.035 30,000 75,000 17,213 4,303 6,885 5,077
0.375 0.049 30,000 75,000 26,534 6,634 10,614 6,816
0.375 0.065 30,000 75,000 39,796 9,949 15,918 8,597
0.500 0.020 30,000 75,000 6,522 1,630 2,609 2,304
0.500 0.028 30,000 75,000 9,459 2,365 3,784 3,172
0.500 0.035 30,000 75,000 12,209 3,052 4,884 3,906
0.500 0.049 30,000 75,000 18,284 4,571 7,313 5,304
0.500 0.065 30,000 75,000 26,351 6,588 10,541 6,786
0.500 0.083 30,000 75,000 37,275 9,319 14,910 8,307
0.625 0.020 30,000 75,000 5,128 1,282 2,051 1,859
0.625 0.028 30,000 75,000 7,381 1,845 2,953 2,568
0.625 0.035 30,000 75,000 9,459 2,365 3,784 3,172
0.625 0.049 30,000 75,000 13,947 3,487 5,579 4,335
0.625 0.065 30,000 75,000 19,697 4,924 7,879 5,591
0.625 0.083 30,000 75,000 27,124 6,781 10,850 6,910
0.625 0.095 30,000 75,000 32,759 8,190 13,103 7,734
0.625 0.109 30,000 75,000 40,172 10,043 16,069 8,639
0.750 0.028 30,000 75,000 6,052 1,513 2,421 2,156
0.750 0.035 30,000 75,000 7,721 1,930 3,088 2,669
0.750 0.049 30,000 75,000 11,273 2,818 4,509 3,664
0.750 0.065 30,000 75,000 15,726 3,931 6,290 4,749
0.750 0.083 30,000 75,000 21,318 5,330 8,527 5,905
0.750 0.095 30,000 75,000 25,446 6,362 10,179 6,637
0.750 0.109 30,000 75,000 30,733 7,683 12,293 7,453
0.750 0.120 30,000 75,000 35,294 8,824 14,118 8,064
0.875 0.020 30,000 75,000 3,593 898 1,437 1,340
0.875 0.028 30,000 75,000 5,128 1,282 2,051 1,859
0.875 0.035 30,000 75,000 6,522 1,630 2,609 2,304
0.875 0.049 30,000 75,000 9,459 2,365 3,784 3,172
0.875 0.065 30,000 75,000 13,087 3,272 5,235 4,126
0.875 0.083 30,000 75,000 17,560 4,390 7,024 5,152
0.875 0.095 30,000 75,000 20,803 5,201 8,321 5,807
0.875 0.109 30,000 75,000 24,886 6,221 9,954 6,543
0.875 0.120 30,000 75,000 28,346 7,087 11,339 7,100
1.000 0.028 30,000 75,000 4,449 1,112 1,780 1,633
1.000 0.035 30,000 75,000 5,645 1,411 2,258 2,027
1.000 0.049 30,000 75,000 8,149 2,037 3,259 2,796
1.000 0.065 30,000 75,000 11,207 2,802 4,483 3,647
1.000 0.083 30,000 75,000 14,928 3,732 5,971 4,567
1.000 0.095 30,000 75,000 17,593 4,398 7,037 5,159
1.000 0.109 30,000 75,000 20,908 5,227 8,363 5,827
1.000 0.120 30,000 75,000 23,684 5,921 9,474 6,336
1.000 0.134 30,000 75,000 27,459 6,865 10,984 6,963
1.250 0.035 30,000 75,000 4,449 1,112 1,780 1,633
1.250 0.049 30,000 75,000 6,380 1,595 2,552 2,260
1.250 0.065 30,000 75,000 8,705 2,176 3,482 2,958
1.250 0.083 30,000 75,000 11,485 2,871 4,594 3,719
1.250 0.095 30,000 75,000 13,443 3,361 5,377 4,213
1.250 0.109 30,000 75,000 15,843 3,961 6,337 4,776
1.250 0.120 30,000 75,000 17,822 4,455 7,129 5,207
1.250 0.134 30,000 75,000 20,468 5,117 8,187 5,742
1.500 0.035 30,000 75,000 3,671 918 1,469 1,367
1.500 0.049 30,000 75,000 5,243 1,311 2,097 1,896
1.500 0.065 30,000 75,000 7,117 1,779 2,847 2,487
1.500 0.083 30,000 75,000 9,333 2,333 3,733 3,136
1.500 0.095 30,000 75,000 10,878 2,719 4,351 3,559
1.500 0.109 30,000 75,000 12,754 3,188 5,101 4,043
1.500 0.120 30,000 75,000 14,286 3,571 5,714 4,416
1.500 0.134 30,000 75,000 16,315 4,079 6,526 4,881
1.500 0.148 30,000 75,000 18,439 4,610 7,375 5,336
1.750 0.035 30,000 75,000 3,125 781 1,250 1,176
1.750 0.049 30,000 75,000 3,864 966 1,546 1,434
1.750 0.065 30,000 75,000 6,019 1,505 2,407 2,146
1.750 0.083 30,000 75,000 7,860 1,965 3,144 2,711
1.750 0.095 30,000 75,000 9,135 2,284 3,654 3,080
1.750 0.109 30,000 75,000 10,672 2,668 4,213 3,504
1.750 0.120 30,000 75,000 11,921 2,980 4,768 3,832
1.750 0.134 30,000 75,000 13,563 3,391 5,425 4,242
1.750 0.148 30,000 75,000 15,268 3,817 6,107 4,645
1.750 0.165 30,000 75,000 17,430 4,357 6,972 5,124
2.000 0.035 30,000 75,000 2,720 680 1,088 1,032
2.000 0.049 30,000 75,000 3,864 966 1,546 1,434
2.000 0.065 30,000 75,000 5,214 1,303 2,086 1,887
2.000 0.083 30,000 75,000 6,788 1,697 2,715 2,387
2.000 0.095 30,000 75,000 7,873 1,968 3,149 2,715
2.000 0.109 30,000 75,000 9,175 2,294 3,670 3,092
2.000 0.120 30,000 75,000 10,227 2,557 4,091 3,384
2.000 0.134 30,000 75,000 11,605 2,901 4,642 3,751
2.000 0.148 30,000 75,000 13,028 3,257 5,211 4,111
2.000 0.165 30,000 75,000 14,820 3,705 5,928 4,542

 

Wall Thickness of WERKSTOFF NR. 1.4404 Heat exchanger Tube
Stainless Steel Tube Suppliers Types Out diameter Wall thickness Length
Stainless Steel 316L Welded Tube (in Stock + Custom Sizes) 5.0mm ~ 1219.2mm 1.0 ~ 15.0 mm Upto 6 Meters
Stainless Steel 316L Seamless Tube (Custom Sizes) 5.0mm ~ 203.2mm As per requirement Upto 6 Meters
NB Sizes (in stock) 1/8” ~ 8” SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Upto 6 Meters

 

Stainless Steel 316L Cold Rolled Coiled Tubing Surface Coating
Surface Finish Internal Surface(ID) Exterbal Surface(OD)
Roughness Average(RA) Roughness Average(RA)
μ inch μm μ inch μm
AP Annealed & Pickled Not defined Not defined 40 or Not defined 1.0 or Not defined
BA Beight Annealed 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8
MP Mechanical Polish 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8
EP Electro Polish 15,10,7,5 0.38,0.25,0.20;0.13 32 0.8

 

Electrical Properties of ASTM A213 TP 316L Instrumentation Tube
Electrical Resistivity 7.4e-005 ohm-cm 7.4e-005 ohm-cm  at 20ºC
Magnetic Permeability 1.008 1.008  at R

 

We stock and produce SS 316L Cold Rolled Coiled Tubing in various shapes, check Chemical Composition

 

DIN 1.4404 Coiled Tubing dimensions
PIPE
SIZE
OD
IN
INCHES
A.S.A. Pipe Schedules
5s 5 10s 10 20 30 40s
& Std.
40 60 80s
& E.H.
80 100 120 140 160 DBL
E.H.
1/8 .405 .035
.1383
.049
.1863
.049
.1863
.068
.2447
068
.2447
0.95
.3145
0.95
.3145
1/4 .540 .049
.2570
.065
.3297
.065
.3297
.088
.4248
088
.4248
.119
.5351
.119
.5351
3/8 .675 .049
.3276
.065
.4235
.065
.4235
.091
.5676
.091
.5676
.126
.7338
.126
.7338
1/2 .840 .065
.5383
.065
.5383
.083
.6710
.083
.6710
.109
.8510
.109
.8510
.147
1.088
.147
1.088
.187
1.304
.294
1.714
3/4 1.050 .065
.6838
.065
.6838
.083
.8572
.083
.8572
.113
1.131
.113
1.131
.154
1.474
.154
1.474
.218
1.937
.308
2.441
1 1.315 .065
.8678
.065
.8678
.109
1.404
.109
1.404
.133
1.679
.133
1.679
.179
2.172
.179
2.172
.250
2.844
.358
3.659
1-1/4 1.660 .065
1.107
.065
1.107
.109
1.806
.109
1.806
.140
2.273
.140
2.273
.191
2.997
.191
2.997
.250
3.765
.382
5.214
1-1/2 1.900 .065
1.274
.065
1.274
.109
2.085
.109
2.085
.145
2.718
.145
2.718
.200
3.631
.200
3.631
.281
4.859
.400
6.408
2 2.375 .065
1.604
.065
1.604
.109
2.638
.109
2.638
.154
3.653
.154
3.653
.218
5.022
.218
5.022
.343
7.444
.436
9.029
2-1/2 2.875 .083
2.475
.083
2.475
.120
3.531
.120
3.531
.203
5.793
.203
5.793
.276
7.661
.276
7.661
.375
10.01
.552
13.70
3 3.500 .083
3.029
.083
3.029
.120
4.332
.120
4.332
.216
7.576
.216
7.576
.300
10.25
.300
10.25
.437
14.32
.600
18.58
3-1/2 4.000 .083
3.472
.083
3.472
.120
4.973
.120
4.973
.226
9.109
.226
9.109
.318
12.51
.318
12.51
.636
22.85
4 4.500 .083
3.915
.083
3.915
.120
5.613
.120
5.613
.237
10.79
.237
10.79
.281
12.66
.337
14.98
.337
14.98
.437
19.01
.531
22.51
.674
27.54
4-1/2 5.000 .247
12.53
.355
17.61
.710
32.53
5 5.563 .109
6.349
.109
6.349
.134
7.770
.134
7.770
.258
14.62
.258
14.62
.375
20.78
.375
20.78
.500
27.04
.625
32.96
.750
38.55
6 6.625 .109
7.585
.109
7.585
.134
9.290
.134
9.290
.280
18.97
.280
18.97
.432
28.57
.432
28.57
.562
36.39
.718
45.30
.864
53.16
7 7.625 .301
23.57
.500
38.05
.875
63.08
Medium Type = Wall thickness in inches
Bold Type = Steel weight per foot in pounds

 

roughness of GOST 03Ch17N14M2 Tube
Surface Absolute Roughness Coefficient
k -
(10-3 m)
(feet)
Drawn Copper, Lead, Brass, Aluminum (new) and the like 0.001 - 0.002 (3.28 - 6.56) 10-6
PVC, PE and other smooth Plastic Pipes 0.0015 - 0.007 (0.49 - 2.30) 10-5
Stainless steel, bead blasted 0.001 - 0.006 (0.00328 - 0.0197) 10-3
Stainless steel, turned 0.0004 - 0.006 (0.00131 - 0.0197) 10-3
Stainless steel, electron-polished 0.0001 - 0.0008 (0.000328 - 0.00262) 10-3
Commercial steel or wrought iron 0.045 - 0.09 (1.48 - 2.95) 10-4
Stretched steel 0.015 4.95 10-5
Weld steel 0.045 1.48 10-4
Galvanized steel 0.15 4.92 10-4
Rusted steel (corrosion) 0.15 - 4 (4.92 - 131) 10-4
New cast iron 0.25 - 0.8 (8.2 - 26.2) 10-4
Worn cast iron 0.8 - 1.5 (2.62 - 4.92) 10-3
Rusty cast iron 1.5 - 2.5 (4.92 - 8.2) 10-3
Sheet or asphalted cast iron 0.01 - 0.015 (3.28 - 4.92) 10-5
Smoothed cement 0.3 0.98 10-3
Ordinary concrete 0.3 - 1 (0.98 - 3.28) 10-3
Coarse concrete 0.3 - 5 (0.98 - 16.4) 10-3
Wood stove 0.18 - 0.9
Well planed wood 0.18 - 0.9 (5.9 - 29.5) 10-4
Ordinary wood 5 16.4 10-3

 

316L Stainless Steel Decorative Tube density
Grade Density (kg/m3)
316L 8000

 

size of ASTM A249 TP 316L High Pressure rectangular tube
Size by Inch  (diameter) Thickness
Sizes by  MM (diameter)
Thickness

inch

inch

   

1“ x 1/2"

0.065"

10×15
0.6~1.5
1“ x 3/4"

0.065"

10×20
0.6~1.5
0.095" 14×21
0.6~1.5
1 1/4" x 3/4"
0.065"
15×30
0.6~1.5
1 1/2" x 3/4"
0.065"
15×38
0.6~1.5
0.120" 20×20
0.6~2

1 1/2" x 1"

0.065"

20×30
0.6~2

0.072"

20×40
0.6~2

0.083"

20×50
0.6~2

0.120"

22×35
0.6~2

2“ x 1”

0.065"

25×40
0.9~2

0.083"

25×65
0.9~3.75

0.120"

30×20
1~2

0.188"

30×40
1~3.75

2” x 1 1/4“

0.065"

30×45
1~3.75

0.083"

30×50
1~3.75

2“ x 1 1/2”

0.083"

30×60
1~4

0.120"

40×25
1~4.5
2 1/2“ x 1 1/2”

0.072"

40×50
1~4.5

0.083"

40×60
1~4.5

0.120"

40×80
1~5

0.148"

40×100
1~5

0.188"

50×25
2~5

0.250"

50×30
2~5
3" x 1"

0.083"

50×60
2~5

0.120"

50×80
2~5

0.188"

50×100
2~5
3“ x 1 1/2”

0.083"

60×30
2~6

0.120"

60×40
2~6

0.188"

60×80
2~6
0.250" 70×50
2~6

3“ x 2”

0.065

80×30
2~8

0.083

80×40
2~8

0.125

80×60
2~8

0.188

80×100
2~8

0.250

100×50
2~8

3“ x 2”

0.083"

120×60
2.5~10

0.120"

120×80
2.5~10

0.188"

140×60
2.5~10

0.250"

140×80
2.5~10
0.312" 150×100
2.5~12

4“ x 1 1/2”

0.120"

160×80
2.5~12

0.188"

180×150
2.5~12
4“ x 2”

0.083"

200×100
4~12

0.120"

200×150
4~12

0.188"

220×140
4~12

0.250"

250×150
6~12

0.312"

250×100
6~12

0.375"

250×200
6~30

4“ x 2 1/2”

0.188"

300×100
6~30

0.250"

300×150
6~30
4" x 3"

0.083"

300×200
6~30

0.120"

300×250
6~30

0.188"

400×250
8~30

0.250"

400×300
8~30

0.312"

450×200
8~30

0.375"

450×250
8~30
4 1/2“ x 2 1/2”

0.188"

400×300
8~30

0.250"

400×350
8~30
5" x 2”

0.120"

500×200
10~30

0.188"

500×250
10~30

0.250"

500×300
10~30

0.312"

500×350
10~30

0.375"

500×400
10~30
5" x 2 1/2”

0.120"

500×450
10~30

0.188"

600×200
10~28

0.250"

600×400
10~28
5" x 3"

0.188"

600×500
10~28

0.250"

800×400
10~28

0.312"

800×600
10~28

0.375"

800×700
10~28

0.500"

1000×400
10~28

5" x 4"

0.188"

1000×500
10~28

0.250"

1000×600
10~28

0.312"

1000×800
10~28

0.375"



6" x 2"

0.120"



0.188"



0.250"



0.312"



0.375"

 

Stock and Supply Range of Stainless Steel 316L Cold Rolled Coiled Tube
Product Description Outside Diamter, OD (in mm) Wall Thickness, WT (in mm)
Stainless Steel Round Pipe/Tube 6 – 630 0.5-30
Square Pipe/Tube 12.7* 12.7 to 300* 300 0.5-30
Stainless Steel Rectangular Pipe/Tube 10*20 to 100*200 0.5-30
Colour Coated Pipe/Tube 6 to 630 0.5-30
Stainless Steel Ornamental Tube 12.7 to 76.2 0.5-2.0
Electropolished Pipes/Tube 12.7 to 250 0.5-30
Stainless Steel Slot Round Pipe/Tube 12.7 to 76.2 0.5-2.0
Triangle Tube 16 to 85 0.5-3.0
Stainless Steel Hexagonal Tube 13 to 85 0.5-2.0
Polished Tube 12.7 to 100 0.5-2.0
Stainless Steel U Shaped Tube 20 to 200 0.5-2.0
Thin-Wall Tube 22*0.7 to 108*2.0 0.5-2.0
Stainless Steel Inner/Outside Polished Tube, Pipes 12.5 to 203.2 1.0 – 5
Capillary Tube 0.28 to 10 0.08 – 1.2
Stainless Steel Seamless Tube 6 to 430 0.8 – 30

 

TP316 Stainless Steel Welded Tube Weight Per Cubic Inch
Stainless Steel Tube Size and Weight
Wall Thickness in mm 0.5 0.6 0.7 0.8 1 1.2 1.6 2 2.6 3 3.2 3.6
O. D. in mm Weight in kg/m
6 0.069 0.081 0.093 0.104 0.125 0.144 0.176
10 0.119 0.141 0.163 0.184 0.225 0.264 0.336
12.7 0.153 0.182 0.21 0.238 0.293 0.345 0.444
14 0.169 0.201 0.233 0.264 0.325 0.384 0.496
15.87 0.192 0.229 0.266 0.301 0.372 0.44 0.571 0.694
19 0.231 0.276 0.32 0.364 0.45 0.534 0.696 0.85 1.066 1.2 1.264
25 0.306 0.366 0.425 0.484 0.6 0.714 0.936 1.15 1.456 1.65 1.744 1.926
25.4 0.311 0.372 0.432 0.492 0.61 0.726 0.952 1.17 1.482 1.68 1.776 1.962
31.8 0.918 1.208 1.49 1.898 2.16 2.288 2.538
38 1.104 1.456 1.8 2.301 2.625 2.784 3.096
44.5 1.299 1.716 2.125 2.724 3.113 3.304 3.681
50.8 1.968 2.44 3.133 3.585 3.808 4.248
63.5 2.476 3.075 3.959 4.538 4.824 5.391
76.1 2.98 3.705 4.778 5.483 5.832 6.525
101.6 4 4.98 6.435 7.395 7.872 8.82
114.3 4.453 5.547 7.173 8.247 8.78 9.84
127 4.955 6.175 7.989 9.188 9.785 10.98
152.4 5.96 7.429 9.62 11.07 11.792 13.231

 

Schedule Chart of Stainless Steel 316L Polish Tube
NB SIZES SCH 5 SCH 10 SCH 40 SCH 80 SCH 160
1/8″
 
1/4″
 
3/8″
 
1/2″
3/4″
1″
1 1/4″
1 1/2″
2″
2 1/2″
3″
4″
5″
 
6″

 

Stainless Steel TP316L Seamless Tubing Value Added Services
  • Heat Treatment, Annealing, Pickling
  • Beveling
  • Destructive Testing, Non Destructive Testing etc.
  • Polishing
  • 100% X-Ray Welding for Large Diameter
  • Ultrasonic Testing

 

we can help with all ASTM A213 TP 316L Instrumentation Tube supply needs. offer Genuine price.

 

Tolerances of 316L Stainless Steel Round Tube
NPS ASTM A312 TP316 OD Tolerance
+
inch mm inch mm
1/8~1 1 /2
> 1 1 /2~4
> 4~8
> 8~18
> 18~26
> 26~34
> 34~48
1/64(0.015)
1/32(0.031)
1/16(0.062)
3/32(0.093)
1/8(0.125)
5/32(0.156)
3/16(0.187)
0.4
0.8
1.6
2.4
3.2
4.0
4.8
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
0.8
0.8
0.8
0.8
0.8
0.8
0.8

NPS ASTM A312 TP 316L WT Tolerance, %
+
1/8-2 1 /2 20.0 12.5
3~18, t/D≤ 5% 22.5 12.5
3~18, t/D> 5% 15.0 12.5
≥ 20, welded 17.5 12.5
≥ 20, seamless, t/D≤ 5% 22.5 12.5
≥ 20, seamless, t/D> 5% 15.0 12.5

 

WERKSTOFF NR. 1.4404 Square Tube Gauge Thickness
GAUGE THICKNESS RANGE (INCH) TYPICAL VALUE (INCH)
22 0.025 - 0.029 0.028
20 0.031 - 0.035 0.035
19 0.038 - 0.042 0.042
18 0.044 - 0.049 0.049
17 0.053 - 0.058 0.058
16 0.060 - 0.065 0.065
15 0.066 - 0.074 0.072
14 0.075 - 0.085 0.083
13 0.087 - 0.097 0.095
12 0.101 - 0.111 0.109
11 0.112 - 0.122 0.12
10 0.126 - 0.136 0.134
9 0.140 - 0.150 0.148
8 0.157 - 0.167 0.165
7 0.175 - 0.185 0.18

 

Hsn Code of UNS S31600 Instrumentation Tube
HS Code Description
73049000 DEFECTIVE STAINLESS STEEL SEAMLESS PIPE/TUBE BRIGHT ANNEALEDA269 316L GRADE
73044100 THT-3R60-12.7-1.65 FL-60-6000- ASTM ASME A/SA213AW A269, SANDVIK 3R60, TP316L, SEAMLESS STAINLESS STEEL Tube, (360 MTR)
73044100 THT-3R60-25.40-3.20 FL-25-6000- ASTM ASME A/SA213AW A269, SANDVIK 3R60, TP316L, SEAMLESS STAINLESS STEEL Tube, (150 MTR
73044900 STAINLESS STEEL SEAMLESS Tube-SPEC:SA 213 TP304/304L SIZE:O.D.19.05MM X W.T.1.65MM X L:27416MM (QTY:15736.80 MTRS)(COLD
73041990 STAINLESS STEEL SEAMLESS TUBE 12.7MMOD X 1MM LESS THAN 2.5 GRADE SS 316L (PCS 2100)
73041990 STAINLESS STEEL SEAMLESS TUBE 12.7MMOD X 1MM LESS THAN 2.5 GRADE SS 316L
73044900 STAINLESS STEEL SEAMLESS Tube-SPEC:SA 213 TP304/304L SIZE:O.D.19.05MM X W.T.1.65MM X L:16187MM (QTY:17595.30 MTRS)(COLD
73044900 SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM)
73044900 SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM)
73044900 SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM)
 
73044900 SEAMLESS STAINLESS STEEL HOT FINISH PIPES / Tube TP 316L (OD NOT LESS THAN 42 MM)
73044900 SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM)
73041190 SEAMLESS STAINLESS STEEL Tube/PIPE(HOT FINISHED)(OD NOT LESS THAN 42MM) GRADE-TP316L-SIZE-42.2*3.56 LENGTH-10-11.8
73044900 SEAMLESS STAINLESS STEEL HOT FINISH PIPES / Tube TP 316L (OD NOT LESS THAN 42 MM)
73044900 SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM)
73044900 SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM)
73041190 SEAMLESS STAINLESS STEEL Tube/PIPE(HOT FINISHED)(OD NOT LESS THAN 42MM) GRADE-TP316L-SIZE-42.2*2.77 LENGTH-10-11.8
73044900 SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM)
73044900 SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM)
73041110 STAINLESS STEEL SEAMLESS Tube/PIPES COLD FINISH & BRIGHT ANNEALED GRADE 316L, A213/A269

 

ASTM A213 TP316L Stainless Steel Bright Annealing Tube Documentation
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Raw Material Test Reports
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Heat Treatment Charts
  • Fumigation Certificates
  • Quality Assurance Plan (QAP)
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Material Traceability Records

 

Mechanical Properties of SA213 TP316L Stainless Steel Tube
GRADE TENSILE STRESS
(MPA) MIN
YIELD STR
0.2% PROOF
(MPA) MIN
ELONG
(% IN 50MM) MIN
HARDNESS
ROCKWELL B (HR B) MAX BRINELL (HB) MAX
SS 316L Tube 485 170 40 95 217

 

316L Stainless Steel Tube Chemical Composition
Material C MN SI P S CR MO NI N
SA213 TP 316L Tube Min - - - - - 16.0 2.00 10.0 -
Max 0.03 2.0 0.75 0.045 0.03 18.0 3.00 14.0 0.10

 

Equivalent Grade of ASME SA213 TP316L Stainless Steel Tube
Material UNS NO OLD BRITISH EN/ EURONORM SWEDISH
SS
JAPANESE
JIS
BS EN NO NAME
SA213 TP 316L Tube S31603 316S11 - 1.4404 X2CrNiMo17-12-2 2348 SUS 316L
Stainless Steel 316L Tube available stock
UNS S316L03 Electropolished Tubing ASME SA249 TP 316L Rectangular Tube
316L Stainless Steel Square Tubing Stainless Steel 1.4404 Polished Tube
316L Stainless Steel Tubing Stainless Steel 316L Fabricated Tube
ASME SA249 TP 316L 12mm Tube 316L Stainless Steel Seamless Tubing
ASTM A249 TP 316L High Pressure Tube Stainless Steel A249 TP316L Thin Wall Tubing
Stainless Steel 1.4404 Electropolished Tube 316L Stainless Steel Cold Drawn Seamless Tube