buy ASTM A276 Type 316 and 304 Cold Finished Bright Steel Bar at best price in India

 

Stainless Steel Bright Bar Manufacturer In India

 

Manufacturer & supplier of Stainless Steel Bright Flat and Peeled Bright Bar

As suggested by its name, a bright bar has a shiny surface. Because the surface of these bars is smooth, the reflection of light is of a higher degree. However, leaving the name aside, the main utility of a SS Hardening Steel Bright Bar is in applications that have very tight tolerances. Generally, applications that have tight tolerances are considered to be very crucial, and they leave no room for error. An error in such cases could have detrimental effects on the surrounding or on human life. Available in several alloy grades, every Stainless Steel Bright Bar Manufacturer In India uses specifications or standards, e.g. ASTM A276, in the manufacture of said products.

When the standards are followed, it is easier to achieve precise dimensional components like the Stainless Steel Peeled Bright Bar. One industry that requires tighter tolerances is the automobile industry. The vehicle parts need to be precise and the use of a Stainless Steel Bright Flat Bar fulfills this requirement, especially because their dimensions are a parameter that is taken care of. Industrial sectors such as agriculture, textiles, railway, power plants, etc all use types of equipment that make use of the molybdenum bearing A276 Type 316 Cold Finished Bright Steel Bar, especially because the alloy has good resistance to corrosion and high tensile strength. In applications that require a low cost option, the end user may choose to purchase a cheaper grade like the A276 Type 304 Bright Bar, which also offers moderate tensile strength and good resistance to corrosion.

compare price of Stainless Steel Bright Bar with Stainless Steel 316 Round Bar price list before buy

 

 

Stainless Steel Bright Bar Specification
Length 2 metres to 6 metres
Size Tolerances h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc.
Stainless Steel Bright Bar Size range 5 mm to 100 mm (3/16 inch – 4 inch)
Length Tolerance Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch)
Stainless Steel Bright Bar Heat Treatment Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering
Surface Finish Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished
Stainless Steel Bright Bar Crack Test Magnetic Particle Inspection (MPI)
Chamfering Available in 30° to 60° through fully automatic both-end chamfering machine
Stainless Steel Bright Bar Ultrasonic Test 100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308
(class 1 to 4), API 6A/ISO 10423:2003-PSL 3, SEP 1920:1984 (class A, B, C), MIL STD 2154
Straightness Up to 0.25 mm/metre TIR (0.0015 inch/feet)

 

Price of SS Bright Bar in india
Description Per Unit (INR) Price in USD Price in EURO
Stainless Steel Bright Bar 117 1.59 1.30
Stainless Steel Bright Bar Grade : Aisi 304l ( 3/8) 125 1.70 1.39
Stainless Steel Bright Bar Grade : Aisi 304l ( 3/16) 127 1.72 1.41
Stainless Steel Bright Bar Grade : Aisi 304l ( 5/16) 127 1.72 1.41
Stainless Steel Bright Bar Grade : Aisi 304l ( 1/4) 127 1.72 1.41
Stainless Steel Bright Bar Grade : Aisi 304l ( 1-1/2) 127 1.72 1.41
Stainless Steel Bright Bar Grade : Aisi 304l ( 3/16) 129 1.75 1.44
Stainless Steel Bright Bar Grade : Aisi 304l ( 7/8) 125 1.70 1.39
Stainless Steel Bright Bar Grade : Aisi 304l ( 2-1/8) 125 1.70 1.39
Stainless Steel Bright Bar 124 1.68 1.38
Stainless Steel Bright Bar 175 2.37 1.95
Stainless Steel Bright Bar Grade : Aisi 304l ( 1.00) 127 1.72 1.41

 

Cold Finished Bright Steel Bar sizes

Stainless Steel Drawn Bar

Min. (mm)

Max. (mm)

Drawn Bar

Min. (inch)

Max. (inch)

Rounds

14 mm

76 mm

Rounds

5/8”

3”

Stainless Steel Flats

Width :
Height :
20 mm
5mm
100 mm
40 mm

Flats


Width :
Height :
3/4"
1/2"
4”
1-1/2”
Stainless Steel Squares
14 mm
65 mm
Squares
1/2"
2-1/2”
Hexagonals
12 mm
60 mm
Hexagonals
5/8”
2”

 

Check weight & dimensions of 420 Stainless Steel Hot Rolled Bright Rod

 

Packaging of Stainless Steel Bright Round Bar
Packaging of Stainless Steel Bright Round Bars
  • All of our stainless steel bright bars & rods are packaged as per international standard to prevent any possible damage or loss.
  • By default, we will use thick woven plastic bag to bundle the finished pipes together in batches

Types of Packaging:

– Bundles (hexagonal)
– Wooden Boxes
– Crates (steel/wooden)
– Packaging for Bright Rod as per customer’s requirements

 

 

 

Stainless Steel Bright Flat Bar Diameter Tolerances
Size Tolerance Rank
Group 1 Group 2 Group 3
>7 ~ ≤20 ±0.25 ±0.35 ±0.40
>20 ~ ≤30 ±0.30 ±0.40 ±0.50
>30 ~ ≤50 ±0.40 ±0.50 ±0.60
>50 ~ ≤80 ±0.60 ±0.70 ±0.80
>80 ~ ≤110 ±0.90 ±1.00 ±1.10
>110 ~ ≤150 ±1.20 ±1.30 ±1.40

Tolerance for Hot Forging Bright Bar
Size Tolerance Rank
Group 1 Group 2
>50 ~ ≤60 +1.5 -1.0 +2.0 -1.0
>60 ~ ≤80 +2.0 -1.0 +2.5 -1.0
>80 ~ ≤100 +2.5 -1.0 +3.0 -1.0
>100 ~ ≤120 +2.5 -1.5 +3.0 -1.5
>120 ~ ≤140 +3.0 -1.5 +3.5 -1.5
>140 ~ ≤160 +3.0 -2.0 +4.0 -2.0
>160 ~ ≤180 +4.0 -2.0 +5.0 -2.0
>180 ~ ≤200 +5.0 -2.0 +6.0 -2.0
>200 ~ ≤220 +5.0 -3.0 +6.0 -3.0
>220 ~ ≤240 +6.0 -3.0 +7.0 -3.0
>240 ~ ≤250 +7.0 -3.0 +8.0 -3.0
>250 ~ ≤300 +8.0 -3.0 +9.0 -3.0

Tolerance for Cold Drawn Bright Bar
Size Tolerance Rank
H8 H9 H10 H11 H12 H13
3 0 ~ -0.014 0 ~ -0.025 0 ~ -0.040 0 ~ -0.060 0 ~ -0.100 0 ~ -0.140
>3 ~ ≤6 0 ~ -0.018 0 ~ -0.030 0 ~ -0.048 0 ~ -0.075 0 ~ -0.120 0 ~ -0.180
>6 ~ ≤10 0 ~ -0.022 0 ~ -0.036 0 ~ -0.058 0 ~ -0.090 0 ~ -0.150 0 ~ -0.220
>10 ~ ≤18 0 ~ -0.027 0 ~ -0.043 0 ~ -0.070 0 ~ -0.110 0 ~ -0.180 0 ~ -0.270
>18 ~ ≤30 0 ~ -0.033 0 ~ -0.052 0 ~ -0.084 0 ~ -0.130 0 ~ -0.210 0 ~ -0.330
>30 ~ ≤50 0 ~ -0.039 0 ~ -0.062 0 ~ -0.100 0 ~ -0.160 0 ~ -0.250 0 ~ -0.390
>50 ~ ≤80 0 ~ -0.046 0 ~ -0.074 0 ~ -0.120 0 ~ -0.190 0 ~ -0.300 0 ~ -0.460

 

Process of Stainless Steel Peeled Bright Bar

We produce Stainless Steel Bar by using following process
  • Straightness upto 0.5mm/ mtr to 1mm /mtr. 240,400,600 Grit Belt Pol
  • Stainless Steel Peeled Bar: Dia. Ø15 mm -120 mm. Peeled, Straightened, Centreless Ground & Polished.
  • Stainless Steel Cold Drawn Bright Bar: Dia. 2.5 mm to 14 mm. Annealed, Pickled, Cold Drawn, Centreless Ground & Polished.
  • Surface finish 0.5 µmm to 1.5µmm max>

 

Are you searching your specific size and length in Grade 410 Bright Bar? Check our stock with price list

 

Stocking Distributors of following types Stainless Steel Bright Bar
Capsule Shape Bright Bar
Capsule Shape Stainless Steel Bright Bar
Hex Bright Bar
Stainless Steel Hex Bright Bar
T Shape Bright Bar
Stainless Steel T Shape Bright Bar
Tear Drop Shape Bright Bar
Stainless Steel Tear Drop Shape Bright Bar
Trapezoids Triangle Bright Bars
Stainless Steel Trapezoids Triangle Bright Bar
Round Bright Bars
Stainless Steel Round Bright Bar
Angle Shape Cold Drawn Bright Bar
Stainless Steel Angle Shape Cold Drawn Bright Bar
D Shape Bright Bar
Stainless Steel D Shape Bright Bar

 

Stainless Steel Bright Rods Color Code

Stainless Steel Bright Rods Color Code

 

Weight Chart of Stainless Steel Hardening Steel Bright Bar
Diameter or
Width
(mm)
Weight per meter
Sectional Area
Perimeter
Square
(kg)
Round
(kg)
Square
(cm²)
Round
(cm²)
Square
(cm)
Round
(cm)
5.0
0.20
0.15
0.25
0.20
2.0
1.57
5.5
0.24
0.19
0.30
0.24
2.2
1.78
6.0
0.28
0.22
0.36
0.28
2.4
1.88
7.0
0.38
0.30
0.49
0.38
2.8
2.20
8.0
0.50
0.39
0.64
0.50
3.2
2.51
9.0
0.64
0.50
0.81
0.64
3.6
2.83
10
0.73
0.63
1.00
0.79
4.0
3.14
11
0.95
0.75
1.21
0.95
4.4
3.46
12
1.13
0.89
1.44
1.13
4.8
3.77
14
1.54
1.21
1.96
1.54
5.6
4.40
16
2.01
1.58
2.56
2.01
6.4
5.03
18
2.54
2.00
3.24
2.54
7.2
5.65
20
3.14
2.47
4.00
3.14
8.0
6.28
22
3.80
2.98
4.84
3.80
8.8
6.91
25
4.91
3.85
6.25
4.91
10.0
7.85
28
6.15
4.83
7.84
6.16
11.2
8.80
32
8.04
6.31
10.24
8.04
12.8
10.05
36
10.17
7.99
12.96
10.18
14.4
11.31
40
12.56
9.86
16.00
12.57
16.0
12.57
45
15.90
12.49
20.25
15.90
18.0
14.14
50
19.62
15.41
25.00
19.64
20.0
15.71
56
24.62
19.34
31.36
24.63
22.4
17.59
63
31.16
24.47
36.69
31.17
25.2
19.79
71
39.57
31.08
50.41
39.59
28.4
22.31
80
50.24
39.46
64.00
50.27
32.0
25.13

 

Testing conducted on ASTM A276 Type 316 Bright Bar
Testing conducted on ASTM A276 Type 316 Bright Bar
  • Positive material recognition
  • Chemical examination
  • Radiographic Test
  • Buckling & Crushing test
  • Mechanical examining like tensile, Elongation and reduction of area.
  • Pitting Corrosion Test
  • Eddy Current test

 

Stainless Steel 304 Bright Bar Delivery State
  • Turned & rough polished
  • The strain Hardened
  • Cold drawn
  • Peeled, center less ground & polished
  • Peeled and polished
  • Trailed center less ground & polished
  • Annealed
  • Hardened strain
  • Solenoid quality
  • Smooth Turned & Polished

 

Know in detail about exact specification of SS Hex Bright Bar with best price Ex Mumbai
Heat Treatment done on Grade 410 Stainless Steel Bright Bar
  • Oil & Water Quenching
  • Hardening & Tempering & Normalizing
  • Solution Annealing
  • Soft Annealing

 

420 Stainless Steel Bright Bar HSN Code

HS code is called Harmonized System Code, Created by World Customs Organization (WCO). HS code in like manner, otherwise called HTS code in USA and NCM code in Brazil, HSN code in India.

In all Countries First six digits of HSH Code are same.

  • First 2 digits – chapters
  • First 4 digits – heading
  • First 6 digits – sub heading

 

First Four Digits Hs Code Bright Bar

Heading Codes
Heading Description
7222
HS Codes Of Other Bar And Bright Bar Of Stainless Steel; Angles, Shapes And Sections Of Stainless Steel First Six Digits HS Code SS Bright Bar

First Six Digits Hs Code Bright Bar

HS Codes
Products Description
722211
HS Codes of Of circular cross section :
722219
HS Codes of Other :
722220
HS Codes of Bar and rods, cold-formed/cold-finished :
722230
HS Codes of Other bars and rods :
722240
HS Codes of Angles, shapes and sections :

First Eight Digits Hs Code Bright Bar

HS Codes
Products Description
72221111
HS Codes Classification of Chromium type
72221112
HS Codes Classification of Nickel chromium austenitic type
72221119
HS Codes Classification of Other
72221191
HS Codes Classification of Chromium type
72221192
HS Codes Classification of Nickel chromium austenitic type
72221199
HS Codes Classification of Other
72221911
HS Codes Classification of Chromium type
72221912
HS Codes Classification of Nickel chromium austenitic type
72221919
HS Codes Classification of Other
72221991
HS Codes Classification of Chromium type
72221992
HS Codes Classification of Nickel chromium austenitic type
72221999
HS Codes Classification of Other
72222011
HS Codes Classification of Chromium type
72222012
HS Codes Classification of Nickel chromium austenitic type
72222019
HS Codes Classification of Other
72222091
HS Codes Classification of Chromium type
72222092
HS Codes Classification of Nickel chromium austenitic type
72222099
HS Codes Classification of Other
72223011
HS Codes Classification of Chromium type
72223012
HS Codes Classification of Nickel chromium austenitic type
72223019
HS Codes Classification of Other
72223091
HS Codes Classification of Chromium type
72223092
HS Codes Classification of Nickel chromium austenitic type
72223099
HS Codes Classification of Other
72224010
HS Codes Classification of Of thickness of 80 mm and above
72224020
HS Codes Classification of Of below 80 mm

 

Marking on Stainless Steel Capsule Shape Bright Bar
  • Ductility class, where L is low, N is normal and E is Earthquake/seismic ductility. This designation came about due to the need to provide reinforcement with ductility appropriate for earthquake resistant structures
  • Size, which is the nominal bar diameter in mm – the standard lists the preferred nominal diameters along with the corresponding cross-sectional area & mass/metre.
  • Strength grade, such as 300 or 500 grade, where the number is the yield strength in megapascals.
  • Shape, where R is round & D is deformed.

 

Stainless Steel Double Side Taper Bright Bar Dimensions

Hot Rolled Stainless Steel Bright Bar

Cold Drawn Stainless Steel Bright Bar

Hot Forging Stainless Steel Bright Bar

φ OD(MM)

φ OD(MM)

φ OD(MM)

φ OD(MM)

φ OD(MM)

φ OD(MM)

φ OD(MM)

φ OD(MM)

8

45

140

2

27

85

50

150

10

48

145

3

28

90

55

155

12

50

150

4

30

95

60

160

14

55

155

5

32

100

65

165

15

60

160

6

34

70

170

16

65

165

7

35

75

180

18

70

170

8

36

80

185

20

75

180

9

38

85

190

22

80

185

10

40

90

195

24

85

190

11

42

95

200

25

90

195

12

45

100

210

27

95

200

14

46

105

220

28

100

210

15

48

110

230

30

105

220

16

50

115

240

32

110

230

18

55

120

250

35

115

240

19

60

125

260

36

120

250

20

65

130

270

38

125

260

22

70

135

280

40

130

270

24

75

140

300

42

135

280

25

80

145

 

Stainless Steel Angle Shape Cold Drawn Bright Bar Condition
H&T
Hardened and tempered.
ANN
Annealed
PH
Precipitation hardened.

 

Quality & Inspection of Stainless Steel Hex Bright Bar
  • Each lot is tested and ensured that material is free from Radio active contamination.
  • Free from any internal defects
  • Each Stainless Steel Bar is tested for size tolerance,Ovality,length and Roughness.
  • Container is fumigated before stuffing. All wooden box /blockes are also fumigated.
  • Bundles are made of 500/1000kgs each packed in HDPE sheets.
  • We issue EN10204/3.1 Certificate as per ADW0
  • All required Mechanical and metallurgical tests are carried out at our works.

 

PREN for various Grades of Stainless Steel bright rod

What is PREN?

Pitting resistance equivalent numbers (PREN) are a hypothetical method of looking at the pitting consumption obstruction of different kinds of hardened steels, in view of their substance creations.

The formula used to calculate PREN is as below:

PREN = %Cr + 3.3(%Mo) + 16(%N)

PREN = 1 × %Cr + 3.3 (%Mo + 0.5 × %W) + 16 × %N

Stainless Steel Grade Type Cr Mo N PREN
Ferritics
1.4003 10.5-12.5 NS 0.030 max 10.5-12.5
1.4016 430 16.0-18.0 NS NS 16.0-18.0
1.4113 434 16.0-18.0 0.9-1.4 NS 19.0-22.6
1.4509 441 17.5-18.5 NS NS 17.5-18.5
1.4521 444 17.0-20.0 1.8-2.5 0.030max 23.0-28.7
Austenitics
1.4301 304 17.5-19.5 NS 0.11max 17.5-20.8
1.4311 304LN 17.5-19.5 NS 0.12-0.22 19.4-23.0
1.4401/4 316/316L 16.5-18.5 2.0-2.5 0.11max 23.1-28.5
1.4435 316L (2.5% min Mo) 17.0-19.0 2.5-3.0 0.11max 25.3-30.7
1.4406 316LN 16.5-18.5 2.0-2.5 0.12-0.22 25.0-30.3
1.4539 904L 19.0-21.0 4.0-5.0 0.15max 32.2-39.9
1.4563 Sanicro 28 24.0-26.0 3.0-4.0 0.11max 35.9-43.0
1.4547 254SMO 19.5-20.5 6.0-7.0 0.18-0.25 42.2-47.6
1.4529 1925hMo 19.0-21.0 6.0-7.0 0.15-0.25 41.2-48.1
1.4565 4565S 24.0-26.0 4.0-5.0 0.30-0.60 42.0-52.1
Duplex
1.40621 2202 22 0.4 0.2 26.5
1.4162 2101LDX 21.0-22.0 0.1-0.8 0.20-0.25 24.5-28.6
1.4362 SAF 2304 22.0-24.0 0.1-0.6 0.05-0.20 23.1-29.2
1.4462 SAF 2205 21.0-23.0 2.5-3.5 0.10-0.22 30.8-38.1
1.44102 SAF 25072 24.0-26.0 3.0-4.0 0.24-0.35 > 40.2
1.45012 Zeron 1002 24.0-26.0 3.0-4.0 0.20-0.30 > 40.2
1.45072 Ferrinox 2552 24.0-26.0 3.0-4.0 0.20-0.30 > 40.2

 

Stainless Steel Half Round Bright Bar Weight Formula
Stainless Steel Bright Bar Weight Calculation Formula
Stainless Steel Bright Bar Weight Formula
0.00623 X ( mm ) Diam X ( mm ) Diam = Weight / Meter
0.0019 X ( mm ) Diam X ( mm ) Diam = Weight / Feet
Stainless Steel Square Bar Weight Formula

0.00788 X ( mm ) Diam X ( mm ) Diam = Weight / Meter
0.00240 X ( mm ) Diam X ( mm ) Diam = Weight / Feet

Stainless Steel hexagonal Bar Weight Forumla
0.00680 X ( mm ) Diam X ( mm ) Diam = Weight / Meter
0.002072 X ( mm ) Width X ( mm ) Diam = Weight / Feet
Stainless Steel Bright Bar Weight Forumla
0.00798 X ( mm ) Thickness X ( mm ) Width = Weight / Meter
0.00243 X ( mm ) Width X ( mm ) Thickness = Weight / Feet

 

Documents Provided for Stainless Steel Isolates Triangle Bright Bar
  • Fumigation Certificates
  • Heat Treatment Charts
  • Material Traceability Records
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Commercial Invoice including HS Code
  • Quality Assurance Plan (QAP)
  • Packing List including number of boxes, net weight and gross weight, Marks and Numbers
  • Raw Material Test Reports
  • NABL approved Laboratory Test Reports

 

Stainless Steel Snip Shape Bright Bar Service Temperature
Stainless Steel Grade Intermittent service temperature Continuous service temperature
304 1600°F 1700°F
(870°C) (925°C)
316 1600°F 1700°F
(870°C) (925°C)
309 1800°F 2000°F
(980°C) (1095°C)
310 1900°F 2100°F
(1035°C) (1150°C)
410 1500°F 1300°F
(815°C) (705°C)
420 1350°F 1150°F
(735°C) (620°C)
430 1600°F 1500°F
(870°C) (815°C)

 

Surface Finish of Stainless Steel T Shape Bright Bar
CD
Cold drawn
P
Polished
BD
Bright drawn
SRE
Slit rolled edge
CG
Centreless ground
HF
Hot finished
CF
Cold finished
HRAP
Hot rolled annealed and pickled
P&T
Peeled and turned
RT
Rough turned/peeled
ST
Smooth turned
PR
Peeled and reeled

 

Stainless Steel Tear Drop Shape Bright Bar Manufacturing Process

Tear Drop Shape Bright Bar Manufacturing Process

 

Chemical Composition of Stainless Steel Y Shaped Bright Bar
Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
201 0.15 1 5.5-7.5 0.5 0.03 3.50-5.50 16.00-18.00
202 0.15 1 7.5-10.0 0.5 0.03 4.00-6.00 17.00-19.00
304 0.08 1 2 .00 0.045 0.03 8.00-11.00 18.00-20.00
304L 0.03 1 2 .00 0.045 0.03 8.00-12.00 18.00-20.00
309 0.2 1 2 .00 0.04 0.03 12.00-15.00 22.00-24.00
309S 0.08 1 2 .00 0.045 0.03 12.00-15.00 22.00-24.00
310 0.25 1.5 2 .00 0.04 0.03 19.00-22.00 24.00-26.00
310S 0.08 1 2 .00 0.045 0.03 19.00-22.00 24.00-26.00
316 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316L 0.03 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316Ti 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
410 0.15 1 1 .00 0.04 0.03 0.6 11.50-13.50
430 0.12 0.12 1 0.04 0.03 0.6 16.00-18.00

 

Stainless Steel I Section Bright Bar Equivalents
Stainless Steel STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304 1.4301 S30400 SUS 304 304S31 08Х18Н10 Z7CN18‐09 X5CrNi18-10
SS 304L 1.4306 / 1.4307 S30403 SUS 304L 3304S11 03Х18Н11 Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11
SS 304H 1.4301 S30409          
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33   Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3
SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2
430 1.4016 S43000          
2205 Duplex 1.4462 S31803/S32205          
420 1.4021/ 1.4028/ 1.4031/ 1.4034 S42000          
431 1.4057 S43100 S80 (aerospace grade)          
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2   X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18   X8CrNi25-21
304LN 1.4311 S30453          
409 1.4512 S40900          
430F 1.4105 S43020          
303 1.4305 S30300
SS 904L 1.4539 N08904 SUS 904L 904S13 STS 317J5 Z2 NCDU 25-20 X1NiCrMoCu25-20-5
SS 317 1.4449 S31700 SUS 317        
SS 317L 1.4438 S31703 SUS 317L       X2CrNiMo18-15-4
SS 321 1.4541 S32100 SUS 321       X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H       X12CrNiTi18-9
SS 347 1.455 S34700 SUS 347   08Ch18N12B   X6CrNiNb18-10
SS 347H 1.4961 S34709 SUS 347H       X6CrNiNb18-12
SS 410 1.4006 S41000 SUS 410 410S21     X12Cr13
SS 446 1.4762 S44600          

 

Advantages of Stainless Steel Trapezoids Triangle Bright Bar
  • Improved Straightness which Facilitates automatic bar feeding in CNC.
  • It improves Machinability and Productivity which Enables higher machining feeds, high tool life, yield & speeds and improved machined finish.
  • Cold drawing of steel improves Size and Section which provides Tighter tolerances which Reduces machining losses.
  • It increases Mechanical Properties which Can reduce the need for hardening.
  • Improved Steel Surface Finish which Reduces surface machining & improves quality.

 

Stainless Steel Pawl Profile Bright Bar Mechanical Properties
Stainless Steel Grades Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
304 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35%
304H 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35%
304L 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35%
310 7.9 g/cm3 1402 °C (2555 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 40%
316 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35%
316L 8.0 g/cm3 1399 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35%
316TI 8.0 g/cm3 1399 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35%
317 7.9 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35%
317L 7.9 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35%
321 8.0 g/cm3 1457 °C (2650 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35%
347 8.0 g/cm3 1454 °C (2650 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35%
904L 7.95 g/cm3 1350 °C (2460 °F) Psi 71000 , MPa 490 Psi 32000 , MPa 220 35%
446 7.5 g/cm3 1510 °C (2750 °F) Psi 75,000 , MPa 485 Psi 40,000 , MPa 275 20%

 

Application of Stainless Steel Bright Rods
  • Shaft Making
  • Automobiles
  • Railways
  • Hoses & Fittings
  • Miscellaneous Fabrication Jobs
  • Agriculture
  • Mining
  • Electric Motors & Pumps

 

Key Features of Stainless Steel Bright Bar
  • Non-Magnetic Response
  • A Highly Precise Surface Finish
  • Outstanding Corrosion Resistance
  • A higher dimensional accuracy
  • Higher Resistance to Cryogenic Temperatures
  • Brute strength

 

Stainless Steel Bright Round Bar For sale
  • ASTM A276 Type 304 Bright bar
  • SS 316 Bright Bar
  • Stainless Steel Bright Flat bar
  • SS Bright Round Bar
  • cold drawn bright steel bar
  • Stainless Steel 316L Bright Bar
  • Hex Bright Bar
  • Medical Implant Quality Bright Bar
  • Cold Finished Bright Bar
  • Stainless steel 202 Bright Rod
  • Stainless Steel Hexagonal Bright bar
  • hot rolled steel bright bar
  • Capsule Shape Bright Bar
  • Stainless Steel Angle Shape Cold Drawn Bright Bar
  • D Shape Bright Bar
  • Stainless Steel Half Round Bright Bar