Raaj Sagar Steels

Stainless Steel Elevator Bolts

Manufacturer of 316 SS Flanged and bucket Elevator Bolt at discounted price

Stainless Steel Elevator Bolts

 

we can help 5/16 and 3/8 Stainless Steel Metric Elevator Bolts supply needs, Before Buy Check price in India

Unlike conventional alloy steels or carbon steels, the use of stainless steels as fastener material is adopted for several reasons. Firstly, some alloys such as grade 304 tend to make very economical Stainless Steel Elevator Bolts. Whereas other alloys such as grade 310 or even grade 316 stainless steel elevator bolts tend to offer high resistance to corrosion, in a wide variety of media. In general, the capacity of carbon or alloy steels to tension and weight is relatively lower in comparison to most grades of 3/8 stainless steel elevator bolts.

This is because the latter tend to have higher elemental alloying in their chemical composition, thus making these stainless steel metric elevator bolts resilient to various forms of corrosion as well as against stressors. The use of these alloys in the manufacture of stainless steel fanged elevator bolts is important because, over time, ordinary alloys tend to get corroded by oxidation corrosion, unlike several stainless steel grades. Oxidation corrosion is otherwise referred to a rusting.

When the alloy rusts, the component will decay, and lose its mechanical properties including its tensile strength and toughness. Hence, the performance of the decayed fastener will inversely be proportional to the rate of corrosion. The wear resistance of the stainless steel Tapco elevator bolts is also significantly higher in comparison to other conventional alloys. For applications that require high levels of mechanical properties, it is possible to use grade 316 stainless steel bucket elevator bolts.

 

Table Of Content:

 

Specification Chart of Stainless Steel Elevator Bolts
ISO standard ISO 7380, ISO 4032, ISO 4017, ISO 4033
British standards BS6105 which covers part 2 nuts, Part 1 bolts and screw , part 4 tapping screws.
Size
  • Cold Froging : M2-M24
  • Hot forging M24-M100, 1-1/2” Dia, up to 1100mm lg
  • Machining and CNC for Customized connecting element: up to M100 / 4” Dia, up to 1500mm lg

M6, M30, M12, M10, M16, (M45), M4, M8, M2, M24, (M3.5), M33, M20, M42, (M14), M5, M48, (M18), (M27), (M22), M36, M3, M160 and as per need
Grade 4.8, A2-70, A4-80, 8.8, A4, A4-70, A2, 18-8 Stainless Steel, Elevator Bolt
Length 3 milimeter - 200 milimeter
Stainless Steel Threads: METRIC, BSW, BSF, UNC, UNF or as required
Standard:
  • ISO 14585C ~DIN 7981C
  • DIN 7973C ~ISO 1483
  • DIN 7983C ~ISO 7051
  • ISO 4762, ISO 2009, ISO 7050, ISO 14587, ISO 14587, ISO 14584, ISO 14582
  • ANSI B18.3.1M
  • ASME B18.6.3
  • GB/T5782, GB/T5783, GB5783

JIS, IS, ISO, BS, ANSI, DIN, GB, ASTM and all International Standards
DIN Standard B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985
UTS UNC, UNF, UNEF, UNS, NPT, NPTF
Dimensions ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded.
Tolerance +/-0.01 milimeter - +/-0.05milimeter
Head drive: Slotted, Six-Lobe, Phillips/Slot, Phillips, etc
Type Round/ Pan/ Hex Head/ Oval/ Truss head
Head Pan head, flat head, oval head, hex head, phillips head
Finishing: Zinc (black, white, yellow, blue), black oxide
plated zinc-nickel, Geometry, nickel plated, anodizing, Stainless steel: Passivated
Hot Dip Galvanised (HDG), Self-Colour, Sherardized and some special one like DACROMET, , Bright Zinc Plated (BZP), Mechanically Applied coating
Finish Per ASTM A380/A380M
Manufacturing process Cold Heading, Heat Treatment, Inspection, Wire Drawing, Packing, Surface Plating, Insert tapping
treatment on Surface
  • Ruspert coating screws
  • Sand blasting
  • Polish
  • Hot-dip galvanizing
  • Rust preventive oil
  • Anodizing
  • Black oxide coating
  • Passivation
  • Heat-disposing
Manufacturers GKW, SPAX® Screws, Kundan, Unbrako, Sundaram Precision, APL, EBY Fastener, Infasco Etc.
Certificate provided
  • as per EN 10204 / 3.1, Manufacturer Test Certificate
  • to ISO 6508-1 Hardness testing
  • Calibrated gauges and tools
  • for calibrated preload to EN 14399-10 Suitability test
  • to ISO 898-2 Nut proof load testing
  • Tri-Roll Thread Comparators
  • to ISO 898-1 Tensile testing
  • in accordance with ISO 148-1 Charpy Impact testing
  • for preloading to EN 14399-2 Suitability
industrial use Wind tower, Electronic industry, Railway, Construction, Automotive industry, Nuclear power,

 

What is Stainless Steel Elevator Bolts ?

Elevator bolts are planned hold together canvas belts utilized in grain lifts and other transport frameworks. The enormous width of the head and square neck makes a more prominent bearing surface to shield the bolt from experiencing the delicate transport material.

 

Price in india of 316 stainless steel elevator bolts
Description
Price
1/4-20, 1-1/4" OAL, 31/32" Head Diam, Stainless Steel Elevator Bolt $25.69
5/16-18, 1-1/2" OAL, 1-3/16" Head Diam, Stainless Steel Elevator Bolt $26.32
1/4-20, 2" OAL, 31/32" Head Diam, Stainless Steel Elevator Bolt $51.47
3/8-16, 2-1/2" OAL, 1-5/16" Head Diam, Stainless Steel Elevator Bolt $30.74
1/4-20, 1-1/2" OAL, 31/32" Head Diam, Stainless Steel Elevator Bolt $31.16

 

Stainless Steel elevator bolts 5/16 Packaging

SS elevator bolts 5/16 PackagingAt Raaj Sagar will be extraordinary SS elevator Bolts with plastic cover to guarantee the uprightness of fixing surface. Air pocket sack, at that point put in to trade wooden flawlessly in to items during transportation to forestall knocks , scratches and different circumstances experienced or according to client necessity.

 

 

 

size chart of Stainless Steel flanged elevator bolts
Size Box
Qty		 Box
Wt		 Dia Length
1/4 - 20 x 1 100 3.7 1/4" 1"
1/4 - 20 x 1-1/2 100 4.2 1/4" 1-1/2"
1/4 - 20 x 1-1/4 100 4 1/4" 1-1/4"
1/4 - 20 x 1-3/4 100 4.6 1/4" 1-3/4"
1/4 - 20 x 2 100 4.7 1/4" 2"
1/4 - 20 x 2-1/2 100 5.1 1/4" 2-1/2"
1/4 - 20 x 2-1/4 100 4.9 1/4" 2-1/4"
1/4 - 20 x 3/4 100 3.5 1/4" 3/4"
3/8 - 16 x 1-1/2 50 4.6 3/8" 1-1/2"
3/8 - 16 x 1-1/4 50 4.3 3/8" 1-1/4"
3/8 - 16 x 1-3/4 50 4.7 3/8" 1-3/4"
3/8 - 16 x 2 50 5.2 3/8" 2"
3/8 - 16 x 2-1/2 50 5.7 3/8" 2-1/2"
3/8 - 16 x 2-1/4 50 5.4 3/8" 2-1/4"
3/8 - 16 x 3 50 7 3/8" 3"
5/16 - 18 x 1 100 5.9 5/16" 1"
5/16 - 18 x 1-1/2 100 7.2 5/16" 1-1/2"
5/16 - 18 x 1-1/4 100 7 5/16" 1-1/4"
5/16 - 18 x 1-3/4 100 7.3 5/16" 1-3/4"
5/16 - 18 x 2 100 7.7 5/16" 2"
5/16 - 18 x 2-1/2 100 9.1 5/16" 2-1/2"
5/16 - 18 x 2-1/4 100 8.7 5/16" 2-1/4"

 

get Stainless Steel Tapco Elevator Bolts with fine, coarse, unf, unc, un, bsw or acme threads online

 

Stocking Distributors of stainless steel bucket elevator bolts
Stainless Steel Flanged Elevator Bolts
Stainless Steel Flanged Elevator Bolts
SS No. 3 Eclipse Slotted Head Elevator Bolts
SS No. 3 Eclipse Slotted Head Elevator Bolts
SS Pointed End Flanged Elevator Bolts
Stainless Steel Pointed End Flanged Elevator Bolts
#1 Norway Elevator Bolts
#1 Norway Elevator Bolts

 

Stainless Steel Bucket bolt in accordance with DIN 15237 (in mm)
Bolt-Ø Length Head-Ø
M 7  20 - 25 - 30 - 35 24
M 8 20 - 25 - 30 - 35 - 40 - 45 - 50 - 60 - 70 28
M 10 25 - 30 - 35 - 40 - 45 - 50 - 55 - 60 - 70 35
M 12 25 - 30 - 35 - 40 - 45 - 50 - 55 - 60 - 65 - 70 42

 

Stainless Steel Pointed End Flanged Elevator Bolts Size chart
Size Box
Qty		 Box
Wt		 Dia Length
1/4 - 20 x 1 100 3.8 1/4" 1"
1/4 - 20 x 1-1/2 100 4.3 1/4" 1-1/2"
1/4 - 20 x 1-1/4 100 4.1 1/4" 1-1/4"
1/4 - 20 x 1-3/4 100 4.7 1/4" 1-3/4"
1/4 - 20 x 2 100 4.8 1/4" 2"
1/4 - 20 x 3/4 100 3.6 1/4" 3/4"
3/8 - 16 x 1-1/2 50 4.6 3/8" 1-1/2"
3/8 - 16 x 1-1/4 50 4.3 3/8" 1-1/4"
3/8 - 16 x 1-3/4 50 4.7 3/8" 1-3/4"
3/8 - 16 x 2 50 5.2 3/8" 2"
3/8 - 16 x 2-1/2 50 5.7 3/8" 2-1/2"
3/8 - 16 x 2-1/4 50 5.4 3/8" 2-1/4"
3/8 - 16 x 3 50 7 3/8" 3"
5/16 - 18 x 1 100 6 5/16" 1"
5/16 - 18 x 1-1/2 100 7.2 5/16" 1-1/2"
5/16 - 18 x 1-1/4 100 7.1 5/16" 1-1/4"
5/16 - 18 x 1-3/4 100 7.3 5/16" 1-3/4"
5/16 - 18 x 2 100 7.8 5/16" 2"

 

Stainless Steel Bucket bolts (small head, in mm)
Bolt-Ø Length Head-Ø
M 6 15 - 20 - 25 - 30 18
M 7 15 - 17 - 20 - 25 - 30 - 35 21
M 8 20 - 25 - 30 - 35 24


Stock list of Stainless Steel Eclipse slotted head Elevator Bolt
Plain;Right Hand; UNC (Coarse)
Dia./Thread Size Fastener Length Head Dia. Fastener Industry Standards
1/4"-20 3/4 in 0.969 in ASME B18.5
1/4"-20 1 in 0.969 in ASME B18.5
1/4"-20 1 1/4 in 0.969 in ASME B18.5
1/4"-20 1 1/2 in 0.969 in ASME B18.5
1/4"-20 1 3/4 in 0.969 in ASME B18.5
1/4"-20 2 in 0.969 in ASME B18.5
1/4"-20 2 1/4 in 0.969 in ASME B18.5
1/4"-20 2 1/2 in 0.969 in ASME B18.5
1/4"-20 3 in 0.969 in ASME B18.5
5/16"-18 3/4 in 1.188 in ASME B18.5
5/16"-18 1 in 1.188 in ASME B18.5
5/16"-18 1 1/4 in 1.188 in ASME B18.5
5/16"-18 1 1/2 in 1.188 in ASME B18.5
5/16"-18 1 3/4 in 1.188 in ASME B18.5
5/16"-18 2 in 1.188 in ASME B18.5
5/16"-18 2 1/2 in 1.188 in ASME B18.5
5/16"-18 3 in 1.188 in ASME B18.5
3/8"-16 1 in 1.312 in ASME B18.5
3/8"-16 1 1/4 in 1.312 in ASME B18.5
3/8"-16 1 1/2 in 1.312 in ASME B18.5
3/8"-16 1 3/4 in 1.312 in ASME B18.5
3/8"-16 2 in 1.312 in ASME B18.5
3/8"-16 2 1/2 in 1.312 in ASME B18.5
3/8"-16 3 in 1.312 in ASME B18.5

 

buy Stainless Steel Metric Elevator Bolts as per American standard and metric specifications

 

Available Standards of Stainless Steel Pointed ends flanged Elevator Bolts
ASME B18.2.1 3/8 inch to 3 inch
BS 1769 ½ inch to 2 inch
ASME B18.2.3.6M M12 to M36
ASME B18.2.3.7M M16 to M36
DIN 6914 M12 to M36
ISO 7412 M12 to M36
UNI 5712 M12 to M36
DIN-EN 14399-4 M12 to M36

 

Standard Stainless Steel Elevator Bolt Weight chart
Size (in) Weight/100 pcs (lbs) Case Qty. Keg Bulk Qty.
1/4 X 3/4 2.94 1200 2000
1/4 X 1 3.24 1200 1700
1/4 X 1 1/4 3.43 1200 1500
1/4 X 1 1/2 3.73 1200 1300
1/4 X 1 3/4 3.98 1200 1200
1/4 X 2 4.29 1200 1000
1/4 X 2 1/4 4.88 600 900
1/4 X 2 1/2 4.92 600 800
5/16 X 3/4 4.76 1200 1200
5/16 X 1 5.05 1200 1000
5/16 X 1 1/4 5.55 1200 900
5/16 X 1 1/2 6.38 600 800
5/16 X 1 3/4 6.5 600 700
5/16 X 2 7.12 600 600
5/16 X 2 1/4 7.43 600 550
5/16 X 2 1/2 7.78 600 500
3/8 X 1 1/4 6.6 600 750
3/8 X 1 1/2 7.1 600 700
3/8 X 1 3/4 7.66 600 600
3/8 X 2 8.31 600 500
3/8 X 2 1/4 9.35 600 450
3/8 X 2 1/2 9.83 600 400
3/8 X 3 10.25 600 300

 

What are available types of Elevator Bolt
  • Grade 2 elevator bolts
  • 302HQ Stainless steel elevator bolts
  • 316 Stainless steel elevator bolts
  • Stainless Steel Eclipse slotted head elevator bolts
  • Fanged Steel  elevator bolts
  • Fanged 300 Series Stainless  elevator bolts
  • Stainless Steel Pointed ends fanged elevator bolts
  • Reference 70 style elevator bolts
  • Norway #1 style elevator bolts
  • Euro DIN 15237 Elevator Bolts
  • Easifit Elevator Bolts Elevator Bolts
  • Stainless Steel Pointed End Fanged Elevator Bolts
  • No. 3 Eclipse Slotted Head
  • 1/4 Stainless steel Elevator Bolts
  • 5/16 SS Elevator Bolts
  • 3/8 Stainless steel Elevator Bolts
  • Stainless Steel Western style 3 prong elevator bolts

 

stainless steel tapco elevator bolts Properties
Forming Hot & Cold Forged
Metric Size M10 to M100
Imperial Size 3/8 to 8"
Threads UNC, UNF, ISO, BSW & ACME.
Standards ASME,BS,DIN,ISO,UNI,DIN-EN
Sub types 1. Fully Threaded Stainless Steel Elevator Bolt
2. Partial Threaded Stainless Steel Elevator Bolt
3. Metric Stainless Steel Elevator Bolt
4. Imperial Stainless Steel Elevator Bolt

 

Flat Countersunk Head Elevator Bolts Size chart
Product Name Size Length
1/4" - 20 X 3/4" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 1/4" - 20 3/4" (Ft)
1/4" - 20 X 1" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 1/4" - 20 1" (Ft)
1/4" - 20 X 1 1/4" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 1/4" - 20 1 1/4" (Ft)
1/4" - 20 X 1 1/2" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 1/4"-20 1 1/2" (Ft)
1/4" - 20 X 1 3/4" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 1/4" - 20 1 3/4" (Ft)
1/4" - 20 X 2" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 1/4" - 20 2" (Ft)
1/4" - 20 X 2 1/4" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 1/4" - 20 2 1/4" (Ft)
1/4" - 20 X 2 1/2" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 1/4" - 20 2 1/2" (Ft)
1/4" - 20 X 3" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 1/4" - 20 3" (Ft)
5/16" - 18 X 3/4" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 5/16" - 18 3/4" (Ft)
5/16" - 18 X 1" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 5/16" - 18 1" (Ft)
5/16" - 18 X 1 1/4" (Ft) Stainless Steel Elevator Bolts, Grade 1, Plain 5/16" - 18 1 1/4" (Ft)

 

dimensions standard of Flanged Elevator Bolts
Size Box
Qty		 Box
Wt		 Dia Length
1/4 - 20 x 1 100 3.7 1/4" 1"
1/4 - 20 x 1-1/2 100 4.2 1/4" 1-1/2"
1/4 - 20 x 1-1/4 100 4 1/4" 1-1/4"
1/4 - 20 x 1-3/4 100 4.6 1/4" 1-3/4"
1/4 - 20 x 2 100 4.7 1/4" 2"
1/4 - 20 x 2-1/2 100 5.1 1/4" 2-1/2"
1/4 - 20 x 2-1/4 100 4.9 1/4" 2-1/4"
1/4 - 20 x 3/4 100 3.5 1/4" 3/4"
3/8 - 16 x 1-1/2 50 4.6 3/8" 1-1/2"
3/8 - 16 x 1-1/4 50 4.3 3/8" 1-1/4"
3/8 - 16 x 1-3/4 50 4.7 3/8" 1-3/4"
3/8 - 16 x 2 50 5.2 3/8" 2"
3/8 - 16 x 2-1/2 50 5.7 3/8" 2-1/2"
3/8 - 16 x 2-1/4 50 5.4 3/8" 2-1/4"
3/8 - 16 x 3 50 7 3/8" 3"
5/16 - 18 x 1 100 5.9 5/16" 1"
5/16 - 18 x 1-1/2 100 7.2 5/16" 1-1/2"
5/16 - 18 x 1-1/4 100 7 5/16" 1-1/4"
5/16 - 18 x 1-3/4 100 7.3 5/16" 1-3/4"
5/16 - 18 x 2 100 7.7 5/16" 2"
5/16 - 18 x 2-1/2 100 9.1 5/16" 2-1/2"
5/16 - 18 x 2-1/4 100 8.7 5/16" 2-1/4"

 

Coatings of Stainless Steel Elevator Bolts
  • Oxidized
  • Passivation
  • Electro Polished
  • Zinc Plating
  • Hot Dipped Galvanizing
  • Chrome Plating
  • Mirror Buffed
  • Epoxy Coating
  • Teflon Coating

 

Check size chart & price list of SS No. 3 Eclipse Slotted Head and #1 Norway Elevator Bolts ex Mumbai

 

Dimensions Schedule of Stainless Steel No. 3 Eclipse Slotted Head Elevator Bolts
Size Box
Qty		 Box
Wt		 Dia Length
1/4 - 20 x 1 100 2.9 1/4" 1"
1/4 - 20 x 1-1/2 100 3.7 1/4" 1-1/2"
1/4 - 20 x 1-1/4 100 3.3 1/4" 1-1/4"
1/4 - 20 x 3/4 100 2.5 1/4" 3/4"
5/16 - 18 x 1 100 4 5/16" 1"
5/16 - 18 x 1-1/2 100 4.9 5/16" 1-1/2"
5/16 - 18 x 1-1/4 100 4.5 5/16" 1-1/4"

 

Stainless Steel Elevator Bolts Dimensions

SS Elevator Bolts

Elevator Bolts: Dimensions (ANSI/ASME B18.5)

Nominal Size

 Body Diameter (E) Head Diameter (A) Head Height (H) Square Width (O) Square Depth (P)
Max Min Max. Edge Sharp  Min. Edge Sharp  Min. Edge Flat Max  Min Max Min Max Min
1/4 .260 .237  1.008 .969 .938 .098 .078 .280 .245 .219 .188
5/16 .324 .298 1.227 1.188 1.157 .114 .094 .342 .307 .250 .219
3/8 .388 .360 1.352 1.312 1.272 .145 .125 .405 .368 .250 .219

 

Tolerance of 316 Stainless Steel Elevator Bolts
Stainless Steel Elevator Bolts: Tolerance on Length
Nominal Bolt Size Nominal Bolt Length
Up to 1" Over 1" - 2-1/2" Over 2-1/2" - 4"
1/4 "- 3/8"
 +0.02, -0.03 +0.02, -0.04 +0.04, -0.06

 

Performance & Mechanical Specs of 3/8 Stainless Steel Elevator Bolts
Stainless Steel Elevator Bolts: Performance & Mechanical Specs

Description

Bolt with a wide, countersunk flat head, a shallow conical bearing surface, an integrally-formed square neck under the head, and a unified thread pitch.
Applications

Commonly used in conveyor systems
Material

AISI 1006 - 1050 or equivalent steel
Core Hardness

1/4" - 3/8" diameter, all lengths: Rockwell B70-B100
Proof Load

1/4" - 3/8" diameter, all lengths: 33,000 psi
Yield Strength

1/4" - 3/8" diameter, all lengths: 36,000 psi min
Tensile Strength

1/4" - 3/8" diameter, all lengths: 54,000 psi min
Elongation

18% min
Reduction of Area

35%
Minimal Thread Length

The minimum length of thread shall be equal to twice the basic bolt diameter plus 0.25"

 

download
Fasteners Types We Manufacture
Other Products
Blog