Stainless steel alloys make excellent additions in any field that they are used in. The grade used to produce them by Stainless Steel Fasteners Manufacturer In India would indicate the properties of the fastener. For instance, the economical grade 304 is an alloy that offers good strength at moderately high temperatures, with superior corrosion resistance properties. Therefore, this grade is recommended by every SS Nut Bolt Manufacturer In Mumbai, especially if the cost of the application is to be brought down.
On the other hand, grades like 316 or 321, or even 347 may be suited to manufacture Heavy Duty Stainless Steel Snap Fasteners, as they offer properties that are at a significantly higher level in comparison to grade 304. Some applications call for specialized components. For example, grade 316 is used in the manufacture of Stainless Steel Marine Fasteners because they have superior resistance to marine water, and they are also resilient to salt sprays and caustic solutions. While the corrosion resistance properties of Stainless Steel Fasteners range from good to excellent, it is possible to increase them by processing them further.
One such processed type of component are Coated Stainless Steel Fasteners, which offer excellent resistance to oxidation corrosion. Since a thick layer of zinc coats the surface of these fasteners, they remain protected from oxidation. Another chemical processing that delivers better corrosion resistance is by the manufacture of Coloured Stainless Steel Fasteners, some of which may contain a percentage of zinc. In addition to chemical processing, mechanical processing fasteners also yields a good result. The processing of Polished Stainless Steel Fasteners removes any excess metal that sticks out, thus smoothening the surface of the fastener.
Before buy compare Stainless Steel Fasteners price with Monel Fasteners price list
Stainless Steel CNC Machining Parts Fastener | Germany, Malaysia, Thailand, Czechia |
Stainless Steel M27 Hex Head Bolt Fastener DIN931 | Indonesia, Belgium, Philippines, Dammam -KSA, |
Stainless Steel M24 Bolt M6 - M24 Stainless Steel 304 DIN 580 Lifting Eye Bolts | USA, Finland, Bangladesh, Malaysia |
Stainless Steel M10 M42 M45 Hex Bolt Stainless Steel DIN933 For Steel Structure | France, Thailand, Europe, Qatar |
m6 m7 stainless steel 12 point flange head bolt | South Africa, Singapore, Singapore, Bahrain |
DIN931 DIN933 Stainless Steel Hexagon Hex Bolt Screw Fastener | Saudi Arabia (KSA), Brazil, Kuwait, South Africa |
Stainless Steel L Shaped Anchor Bolt M22X1.5 Fastener | Malaysia, UAE, Hong Kong, Oman |
DIN7991 Stainless Steel Screws Fasteners M4*0.7 | Australia, Nigeria, UK, Philippines |
Cge Nuts M8 M10 Nuts Stainless Steel Fasteners | Turkey, Malaysia, Norway, United Arab Emirates (UAE) |
m6 m7 stainless steel flange head bolt | Italy, Singapore, Iran, Chile |
Stainless-Steel 4.8/8.8/10.9 Galvanized Inner Hexagon Socket Screw Machinery/Industry Fasteners | Spain, UK, Mexico, Egypt |
ANSI B18.2.1 B8m Stub Bolt 8m Flange Nut Stainless Steel Fastener | Malaysia, Dubai, Russia, Netherlands |
DIN6921 M8 Custom 12 Point Stainless Steel Hex Flange Bolt Fasteners with Gasket | Canada, Ellington -United States, Poland, UK |
stainless steel fasteners m6 square head bolt | Europe, UAE, Malaysia, United Kingdom -UK |
DIN938 Stainless Steel Double Thread Rods | Japan, Malaysia, Romania, Europe |
DIN603 stainless steel carriage bolt M8 | Malaysia, Singapore, Canada, Philippines |
Stainless Steel 304 Cross Recessed Screw Fastener M2 M4 | Taiwan, Philippines, Los Alamos -Mexico, Malaysia |
DIN934 Stainless Steel B8 Heavy Hex Nut Fastener | Colombia, China, Malaysia, Sweden |
Stainless Steel CNC Fasteners for F1 Racing (LM-322F) | South Korea, Malaysia, NY 12203 (USA), Singapore |
Standard | BS, DIN, ANSI, UNI, IS, GB, ASME, ISO, JIS, ASTM and all International Standards |
---|---|
SS fasteners Threads: | BSW, METRIC, UNF UNC, BSF or as required |
Stainless Steel Fasteners Standard | ANSI
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS : UNF, UNEF, UNS, NPTF, NPT, UNC ISO : ISO 4032, JIS standards, ISO 4033 |
Fasteners/ Bolts Size | M5, M12, M3, M14, M10, M4, M24, M16, M36, M30, M2, M20, M8, M6, M2.5 to M160 |
Length | 3 mm to 200 mm |
Head | Phillips/Slot, Slotted, Six-Lobe, Phillips etc |
SS fasteners Test Certificate | Manufacturer Test Certificate as per EN 10204 / 3.1 |
Finishing | black oxide,
(yellow, black, blue), Dacroment, Zinc white, some special one like DACROMET and Mechanically Applied coating, plated zinc-nickel, Geometry, nickel plated, anodizing, Stainless steel: Passivated Bright Zinc Plated (BZP), Self-Colour, Sherardized, Hot Dip Galvanised (HDG) |
raw materials of Source | Usha Martin, RINL, Tata Steel, Dhamm Steel, JSPL, Mukund Steel etc. |
SS fasteners Form | Hex, Square, Round, Threading as per Gauge Etc. |
Manufacturing of Stainless Steel Fasteners | machining and CNC for Customized connecting element, hot forging M24-M100, M2-M24: Cold Froging |
SS fasteners Surface Coating |
|
Stainless Steel Fasteners Packing | IN BULK: canton, pallet, Small Boxs / carton / pallet or customer request |
Description | Per Unit (INR) | Price in USD | Price in EURO |
---|---|---|---|
LIFTING EYE BOLTS STAINLESS STEEL A4 M 16 (INDUSTRIAL FASTENERS) | 339 | 4.57 | 3.86 |
EYE BOLTS TYPE B STAINLESS STEEL A2 M 10 X 40 (INDUSTRIAL FASTENERS) | 90 | 1.21 | 1.02 |
EYE BOLTS TYPE B STAINLESS STEEL A2 M 10 X 40(INDUSTRIAL FASTENERS) | 98 | 1.32 | 1.11 |
STAINLESS STEEL FASTENERS-HEX BOLT GRADE:A4-80 SIZE:M12x80 [7200 PCS] | 302 | 4.07 | 3.43 |
SS BOLT FULL THREAD SIZE 8X125 (STAINLESS STEEL GRADE 200 FASTENERS) | 4 | 0.054 | 0.045 |
SS BOLT FULL THREAD SIZE 8X80 (STAINLESS STEEL GRADE 200 FASTENERS) | 3 | 0.040 | 0.034 |
SS BOLT FULL THREAD SIZE 8X100 (STAINLESS STEEL GRADE 200 FASTENERS) | 3 | 0.040 | 0.034 |
SS BOLT FULL THREAD SIZE 8X150 (STAINLESS STEEL GRADE 200 FASTENERS) | 5 | 0.067 | 0.057 |
STAINLESS STEEL FASTENERS. ITEM CODE-931 HEXAGON HEAD BOLTS,DIN 931, GRADE:A2-70, SIZE:M20 X 260(RE-IMPORT) | 189 | 2.55 | 2.15 |
SIZE (D) | DIA | ACRO ASTM A193 THE FLATS |
HEAD THICKNESS ASTM A193 |
ACRO ASTM A193 CORNERS |
||||
---|---|---|---|---|---|---|---|---|
D (MAXIMUM) | D (MINIMUM) | F (MAXIMUM) | F (MINIMUM) | H (MAXIMUM) | H (MINIMUM) | C (MAXIMUM) | C (MINIMUM) | |
m12 | 12.00 | 11.73 | 19.00 | 17.73 | 7.76 | 4.24 | 20.78 | 20.03 |
m10 | 10.00 | 9.78 | 17.00 | 15.73 | 6.63 | 6.17 | 18.48 | 17.77 |
m14 | 14.00 | 13.73 | 22.00 | 20.67 | 9.09 | 8.51 | 24.25 | 23.35 |
m20 | 20.00 | 19.67 | 30.00 | 29.16 | 12.88 | 12.12 | 34.64 | 32.95 |
m16 | 16.00 | 15.73 | 24.00 | 23.67 | 10.32 | 9.68 | 27.71 | 26.75 |
m24 | 24.00 | 23.67 | 36.00 | 35.00 | 15.44 | 14.56 | 41.57 | 39.55 |
m36 | 36.00 | 35.61 | 55.00 | 53.80 | 23.38 | 21.63 | 63.51 | 60.79 |
m100 | 90.00 | 99.13 | 145.00 | 140.00 | 63.9 | 60.10 | 167.43 | 159.60 |
m30 | 30.00 | 29.67 | 46.00 | 45.00 | 19.48 | 17.92 | 53.12 | 50.85 |
m42 | 42.00 | 41.38 | 65.00 | 62.90 | 26.97 | 25.03 | 75.06 | 71.71 |
m56 | 56.00 | 55.26 | 85.00 | 82.20 | 36.2 | 33.80 | 98.15 | 93.71 |
m48 | 48.00 | 47.38 | 75.00 | 72.60 | 31.07 | 28.93 | 86.60 | 82.76 |
m64 | 64.00 | 63.26 | 95.00 | 91.80 | 41.32 | 38.68 | 109.70 | 104.65 |
m80 | 80.00 | 79.26 | 115.00 | 111.00 | 51.58 | 48.42 | 132.72 | 126.54 |
m72 | 72.00 | 71.26 | 105.00 | 101.40 | 46.45 | 43.55 | 121.24 | 115.60 |
m90 | 90.00 | 89.13 | 130.00 | 125.50 | 57.74 | 54.26 | 150.11 | 143.07 |
Nominal Size | G | F | H | ||||||
Width Across Corners |
Width Across Flats |
Thickness | |||||||
Maximum | Minimum | Basic | Maximum | Minimum | Basic | Maximum | Minimum | ||
5/16 | .3125 | .577 | .557 | 1/2 | .500 | .489 | 17/64 | .273 | .258 |
1/4 | .2500 | .505 | .488 | 7/16 | .438 | .428 | 7/32 | .226 | .212 |
3/8 | .3750 | .650 | .628 | 9/16 | .562 | .551 | 21/64 | .337 | .479 |
1/2 | .5000 | .866 | .840 | 3/4 | .750 | .736 | 7/16 | .448 | .427 |
7/16 | .4375 | .794 | .768 | 11/16 | .688 | .675 | 3/8 | .385 | .365 |
9/16 | .5625 | 1.010 | .982 | 7/8 | .875 | .861 | 31/64 | .496 | .473 |
3/4 | .7500 | 1.299 | 1.240 | 1-1/8 | 1.125 | 1.088 | 41/64 | .665 | .617 |
5/8 | .6250 | 1.083 | 1.051 | 15/16 | .938 | .922 | 35/64 | .559 | .535 |
7/8 | .8750 | 1.516 | 1.447 | 1-5/16 | 1.312 | 1.269 | 3/4 | .776 | .724 |
1-1/8 | 1.1250 | 1.949 | 1.859 | 1-11/16 | 1.688 | 1.631 | 31/32 | .999 | .939 |
1 | 1.0000 | 1.732 | 1.653 | 1-1/2 | 1.500 | 1.450 | 55/64 | .887 | .831 |
1-3/8 | 1.3750 | 2.382 | 2.273 | 2-1/16 | 2.062 | 1.994 | 1-11/64 | 1.206 | 1.138 |
2-3/4 | 2.7500 | 4.763 | 4.546 | 4-1/8 | 4.125 | 3.988 | 2-3/8 | 2.431 | 2.319 |
1-5/8 | 1.6250 | 2.815 | 2.686 | 2-7/16 | 2.438 | 2.356 | 1-25/64 | 1.429 | 1.353 |
1-1/2 | 1.500 | 2.598 | 2.480 | 2-1/4 | 2.250 | 2.175 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
1-3/4 | 1.7500 | 3.031 | 2.893 | 2-5/8 | 2.625 | 2.538 | 1-1/2 | 1.540 | 1.460 |
2-1/4 | 2.2500 | 3.897 | 3.719 | 3-3/8 | 3.375 | 3.263 | 1-15/16 | 1.986 | 1.890 |
2 | 2.0000 | 3.464 | 3.306 | 3 | 3.000 | 2.900 | 1-23/32 | 1.763 | 1.675 |
2-1/2 | 2.5000 | 4.330 | 4.133 | 3-3/4 | 3.750 | 3.625 | 2-5/32 | 2.209 | 2.105 |
Nominal Size or Basic Major Thread Diameter | F | G | H | ||||||
Width Across Flats | Width Across Corners | Thickness | |||||||
Basic | Max | Min | Max | Min | Basic | Max | Min | ||
1/4 | .2500 | 1/2 | .500 | .488 | .577 | .556 | 15/64 | .250 | .218 |
5/16 | .3125 | 9/16 | .562 | .546 | .650 | .622 | 19/64 | .314 | .280 |
3/8 | .3750 | 11/16 | .688 | .669 | .794 | .763 | 23/64 | .377 | .341 |
7/16 | .4375 | 3/4 | .750 | .728 | .866 | .830 | 27/64 | .441 | .403 |
1/2 | .5000 | 7/8 | .875 | .850 | 1.010 | .969 | 31/64 | .504 | .464 |
9/16 | .5625 | 15/16 | .938 | .909 | 1.083 | 1.037 | 35/64 | .568 | .526 |
5/8 | .6250 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 39/64 | .631 | .587 |
3/4 | .7500 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.382 | 47/64 | .758 | .710 |
7/8 | .8750 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 55/64 | .885 | .833 |
1 | 1.0000 | 1-5/8 | 1.325 | 1.575 | 1.876 | 1.796 | 63/64 | 1.012 | .956 |
1-1/8 | 1.1250 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 1-7/64 | 1.139 | 1.079 |
1-1/4 | 1.2500 | 2 | 2.000 | 1.938 | 2.309 | 2.209 | 1-7/32 | 1.251 | 1.187 |
1-3/8 | 1.3750 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 1-11/32 | 1.378 | 1.460 |
1-1/2 | 1.5000 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1-15/32 | 1.505 | 1.433 |
1-5/8 | 1.6250 | 2-9/16 | 2.562 | 2.481 | 2.959 | 2.828 | 1-19/32 | 1.632 | 1.556 |
1-3/4 | 1.7500 | 2-3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1-23/32 | 1.759 | 1.679 |
2 | 2.0000 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-31/32 | 2.013 | 1.925 |
2-1/4 | 2.2500 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 2-13/64 | 2.251 | 2.155 |
2-1/2 | 2.5000 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 2-29/64 | 2.505 | 2.401 |
2-3/4 | 2.7500 | 4-1/4 | 4.250 | 4.112 | 4.907 | 4.688 | 2-45/64 | 2.759 | 2.647 |
3 | 3.0000 | 4-5/8 | 4.625 | 4.475 | 5.340 | 5.102 | 2-61/64 | 3.013 | 2.893 |
3-1/4 | 3.2500 | 5 | 5.000 | 4.838 | 5.774 | 5.515 | 3-3/16 | 3.252 | 3.124 |
3-1/2 | 3.5000 | 5-3/8 | 5.375 | 5.200 | 6.207 | 5.928 | 3-7/16 | 3.506 | 3.370 |
3-3/4 | 3.7500 | 5-3/4 | 5.750 | 5.562 | 6.640 | 6.341 | 3-11/16 | 3.670 | 3.616 |
4 | 4.0000 | 6-1/8 | 6.125 | 5.925 | 7.073 | 6.755 | 3-15/16 | 4.014 | 3.862 |
Torque chart | |||||||
---|---|---|---|---|---|---|---|
Inches Bolt Size |
Per Inch Threads |
in Inch-Pounds Standard Dry Torque |
|||||
Stainless Steel 304 fasteners |
Stainless Steel 316 fasteners |
||||||
#3 | 48 | 3.9 | 4.0 | ||||
56 | 4.4 | 4.6 | |||||
#4 | 40 | 5.2 | 5.5 | ||||
48 | 6.6 | 6.9 | |||||
#5 | 40 | 7.7 | 8.1 | ||||
44 | 9.4 | 9.8 | |||||
#6 | 32 | 9.6 | 10.1 | ||||
40 | 12.1 | 12.7 | |||||
#8 | 32 | 19.8 | 20.7 | ||||
36 | 22.0 | 23.0 | |||||
#10 | 24 | 22.8 | 23.8 | ||||
32 | 31.7 | 33.1 | |||||
Inches Bolt Size |
Per Inch Threads |
in Inch-Pounds Standard Dry Torque |
|||||
Stainless Steel 304 fasteners |
Stainless Steel 316 fasteners |
||||||
1/4 | 20 | 75.2 | 78.8 | ||||
28 | 94.0 | 99.0 | |||||
5/16 | 18 | 132 | 138 | ||||
24 | 142 | 147 | |||||
3/8 | 16 | 236 | 247 | ||||
24 | 259 | 271 | |||||
7/16 | 14 | 376 | 393 | ||||
20 | 400 | 418 | |||||
1/2 | 13 | 517 | 542 | ||||
20 | 541 | 565 | |||||
Inches Bolt Size |
Per Inch Threads |
in Inch-Pounds Standard Dry Torque |
|||||
Stainless Steel 304 fasteners |
Stainless Steel 316 fasteners |
||||||
9/16 | 12 | 682 | 713 | ||||
18 | 752 | 787 | |||||
5/8 | 11 | 1110 | 1160 | ||||
18 | 1244 | 1301 | |||||
3/4 | 10 | 1530 | 1582 | ||||
16 | 1490 | 1558 | |||||
7/8 | 9 | 2328 | 2430 | ||||
14 | 2318 | 2420 | |||||
1 | 8 | 3440 | 3595 | ||||
14 | 3110 | 3250 | |||||
Inches Bolt Size |
Per Inch Threads |
in Foot-Pounds Standard Dry Torque |
|||||
Stainless Steel 304 fasteners |
Stainless Steel 316 fasteners |
||||||
1 1/8 | 7 | 413 | 432 | ||||
12 | 390 | 408 | |||||
1 1/4 | 7 | 523 | 546 | ||||
12 | 480 | 504 | |||||
1 1/2 | 6 | 888 | 930 | ||||
12 | 703 | 732 |
Stainless Steel Nuts Size (mm) |
Diameter* (mm) |
Height (mm) |
||
---|---|---|---|---|
Stainless Steel Hex Nuts |
Stainless Steel Jam Nuts |
Stainless Steel Nylock Nuts |
||
2 |
4 |
1.6 |
1.2 |
- |
2.5 |
5 |
2 |
1.6 |
- |
3 |
5.5 |
2.4 |
1.8 |
4 |
4 |
7 |
3.2 |
2.2 |
5 |
5 |
8 |
4 |
2.7 |
5 |
6 |
10 |
5 |
3.2 |
6 |
7 |
11 |
5.5 |
3.5 |
- |
8 |
13 |
6.5 |
4 |
8 |
10 |
17 |
8 |
5 |
10 |
12 |
19 |
10 |
6 |
12 |
14 |
22 |
11 |
7 |
14 |
16 |
24 |
13 |
8 |
16 |
18 |
27 |
15 |
9 |
18.5 |
20 |
30 |
16 |
10 |
20 |
*This is the diameter across the flats. It is also the size of wrench to use. |
Stainless Steel Cap Head Bolts | Stainless Steel Fasteners |
ASME SA193 Stainless Steel Toggle Bolts | A193 Stainless Steel Automotive Bolts |
A193 Stainless Steel Allen Head Bolts | Stainless Steel Button Head Bolts |
A4 Stainless Steel Gutter Bolts | Grade A2 Stainless Steel Stud Bolt |
A193 Stainless Steel Weld Nuts | ASME SA193 SS Rivet Nuts |
18/8 Stainless Steel Flat Head Bolts | 18/8/3 Stainless Steel Deck Bolts |
SA193 Stainless Steel Barrel Nuts | A193 Stainless Steel Wheel Nuts |
Stainless Steel Fasteners Type |
Stainless Steel Fasteners SIZE |
PROPERTY CLASS |
Stainless Steel Fasteners Standard |
---|---|---|---|
Socket Head Cap Screw |
M3 to M30 |
A2 – 70/80, A4 – 70/80 |
DIN 912 / ISO 4762 |
Hex Head Screw (Full Thread) |
M3 to M30 |
A2 – 70/80, A4 – 70/80 |
DIN 933 / ISO 4017 |
Hex Head Bolt (Partial Thread) |
M4 to M30 |
A2 – 70/80, A4 – 70/80 |
DIN 931 / ISO 4014 |
Hex Nut |
M3 to M30 |
A2 – 70/80, A4 – 70/80 |
DIN 934 / ISO 4032 |
Plain Washer |
M3 to M64 |
A2, A4 |
DIN 125 A |
Flat – Section Spring Washer |
M3 to M36 |
A2, A4 |
DIN 127 B |
Square – Section Spring Washer |
M3 to M36 |
A2, A4 |
DIN 7980 |
Threaded Rod |
M3 to M36 |
A2 – 70/80, A4 – 70/80 |
DIN 975 |
METRIC SIZE | A1/ A2/ A4-50 (N) | A1/ A2/ A4-70 (N) | A1/ A2/ A4-80 (N) |
---|---|---|---|
M3 | 2515 | 3521 | 4024 |
M3.5 | 3390 | 4646 | 5424 |
M4 | 4390 | 6146 | 7024 |
M5 | 7100 | 9940 | 11360 |
M6 | 10050 | 14070 | 16080 |
M7 | 14450 | 20230 | 23120 |
M8 | 18300 | 25620 | 29280 |
M10 | 29000 | 40600 | 46400 |
M12 | 42150 | 59010 | 67440 |
M14 | 57500 | 80500 | 92000 |
M16 | 78500 | 109900 | 125600 |
M18 | 96000 | 134400 | 153600 |
M20 | 122500 | 171500 | 196000 |
M22 | 151500 | 212100 | 242400 |
M24 | 176500 | 247100 | 282400 |
M27 | 229500 | 321300 | 367200 |
M30 | 280500 | 392700 | 448800 |
M33 | 408500 | 571900 | 653600 |
M36 | 408500 | 571900 | 653600 |
M39 | 488000 | 683200 | 780800 |
Thread | Coefficient of friction | Preload (Kn) Property Class/ Grade | Tightening Torque (Nm) class | Min Breaking Torque | ||||||
---|---|---|---|---|---|---|---|---|---|---|
A1-50 (303) | A2-70 (304) | A4-80 (316) | A1-50 (303) | A2-70 (304) | A4-80 (316) | A1-50 (303) | A1-70 (303) | A4-80 (316) | ||
M1.6 | 0.1 | 0.4 | 0.55 | 0.55 | 0.1 | 0.1 | 0.2 | 0.15 | 0.2 | 0.24 |
0.2 | 0.3 | 0.35 | 0.35 | 0.1 | 0.2 | 0.35 | ||||
0.3 | 0.2 | 0.3 | 0.3 | 0.2 | 0.25 | 0.45 | ||||
M2.0 | 0.1 | 0.5 | 0.6 | 0.6 | 0.15 | 0.2 | 0.3 | 0.3 | 0.4 | 0.48 |
0.2 | 0.4 | 0.5 | 0.5 | 0.25 | 0.3 | 0.4 | ||||
0.3 | 0.25 | 0.36 | 0.36 | 0.4 | 0.4 | 0.55 | ||||
M2.5 | 0.1 | 0.65 | 0.9 | 0.9 | 0.25 | 0.45 | 0.6 | 0.6 | 0.9 | 0.96 |
0.2 | 0.4 | 0.5 | 0.5 | 0.45 | 0.6 | 0.65 | ||||
0.3 | 0.3 | 0.3 | 0.3 | 0.6 | 0.75 | 0.8 | ||||
M3.0 | 0.1 | 0.9 | 1 | 1 | 0.85 | 1 | 1.3 | 1.1 | 1.6 | 1.8 |
0.2 | 0.6 | 0.65 | 0.65 | 1 | 1.1 | 1.6 | ||||
0.3 | 0.4 | 0.45 | 0.45 | 1.25 | 1.35 | 1.85 | ||||
M4.0 | 0.1 | 1.08 | 2.97 | 2.97 | 0.8 | 1.7 | 2.3 | 2.7 | 3.8 | 4.3 |
0.2 | 1.12 | 2.4 | 2.4 | 1.3 | 2.6 | 3.5 | ||||
0.3 | 0.9 | 1.94 | 1.94 | 1.5 | 3 | 4.1 | ||||
M5.0 | 0.1 | 2.26 | 4.85 | 4.85 | 1.6 | 3.4 | 4.6 | 5.5 | 7.8 | 8.8 |
0.2 | 1.83 | 3.93 | 3.93 | 2.4 | 5.1 | 6.9 | ||||
0.3 | 1.49 | 3.19 | 3.19 | 2.8 | 6.1 | 8 | ||||
M6.0 | 0.1 | 3.2 | 6.85 | 6.85 | 2.8 | 5.9 | 8 | 9.3 | 13 | 15 |
0.2 | 2.59 | 5.54 | 5.54 | 4.1 | 8.8 | 11.8 | ||||
0.3 | 2.09 | 4.49 | 4.49 | 4.8 | 10.4 | 13.9 | ||||
M8.0 | 0.1 | 5.86 | 12.6 | 12.6 | 6.8 | 14.5 | 19.3 | 23 | 32 | 37 |
0.2 | 4.75 | 10.2 | 10.2 | 10.1 | 21.4 | 28.7 | ||||
0.3 | 3.85 | 8.85 | 8.85 | 11.9 | 25.5 | 33.9 |
Thread | Coefficient of friction | Preload (Kn) Property Class/ Grade | Tightening Torque (Nm) class | Min Breaking Torque | ||||||
---|---|---|---|---|---|---|---|---|---|---|
A1-50 (303) | A2-70 (304) | A4-80 (316) | A1-50 (303) | A2-70 (304) | A4-80 (316) | A1-50 (303) | A1-70 (303) | A4-80 (316) | ||
M10.0 | 0.1 | 9.32 | 20 | 20 | 13.7 | 30 | 39.4 | 46 | 65 | 74 |
0.2 | 7.58 | 16.2 | 16.2 | 20.3 | 44 | 58 | ||||
0.3 | 6.14 | 13.1 | 13.1 | 24 | 51 | 69 | ||||
M12.0 | 0.1 | 13.6 | 29.1 | 29.1 | 23.6 | 50 | 67 | 80 | 110 | 130 |
0.2 | 11.1 | 23.7 | 23.7 | 34.8 | 74 | 100 | ||||
0.3 | 9 | 19.2 | 19.2 | 41 | 88 | 117 | ||||
M14.0 | 0.1 | 18.7 | 40 | 40 | 37.1 | 79 | 106 | 210 | 290 | 330 |
0.2 | 15.2 | 32.6 | 32.6 | 56 | 119 | 159 | ||||
0.3 | 12.3 | 26.4 | 26.4 | 66 | 141 | 188 | ||||
M.16.0 | 0.1 | 25.7 | 55 | 55 | 56 | 121 | 161 | |||
0.2 | 20.9 | 44.9 | 44.9 | 86 | 183 | 245 | ||||
0.3 | 17 | 36.4 | 36.4 | 102 | 218 | 291 | ||||
M18.0 | 0.1 | 32.2 | 69 | 69 | 81 | 174 | 232 | |||
0.2 | 26.2 | 56.2 | 56.2 | 122 | 260 | 346 | ||||
0.3 | 21.1 | 45.5 | 45.5 | 144 | 380 | 411 | ||||
M20.0 | 0.1 | 41.3 | 88.6 | 88.6 | 114 | 224 | 325 | |||
0.2 | 33.8 | 72.4 | 72.4 | 173 | 370 | 494 | ||||
0.3 | 27.4 | 58.7 | 58.7 | 205 | 439 | 586 | ||||
M22.0 | 0.1 | 50 | 107 | 107 | 148 | 318 | 424 | |||
0.2 | 41 | 88 | 88 | 227 | 488 | 650 | ||||
0.3 | 34 | 72 | 72 | 272 | 582 | 776 | ||||
M24.0 | 0.1 | 58 | 142 | 142 | 187 | 400 | 534 | |||
0.2 | 47 | 101 | 101 | 284 | 608 | 810 | ||||
0.3 | 39 | 83 | 83 | 338 | 724 | 966 |
Thread | Coefficient of friction | Preload (Kn) Property Class/ Grade | Tightening Torque (Nm) class |
---|---|---|---|
A1-50 (303) | A1-50 (303) | ||
M27.0 | 0.1 | 75 | 275 |
0.2 | 61 | 421 | |
0.3 | 50 | 503 | |
M33.0 | 0.1 | 91 | 374 |
0.2 | 75 | 571 | |
0.3 | 61 | 680 | |
M36.0 | 0.1 | 114 | 506 |
0.2 | 94 | 779 | |
0.3 | 76 | 929 | |
M39.0 | 0.1 | 135 | 651 |
0.2 | 110 | 998 | |
0.3 | 89 | 1189 | |
0.1 | 162 | 842 | |
0.2 | 133 | 1300 | |
0.3 | 108 | 1553 |
Unified Inch Coarse and Fine Threads |
|||
---|---|---|---|
Stainless Steel Bolt Size |
Threads per Inch |
||
Frac. [No.] |
Decimal |
UNC |
UNF |
1/8 [#6] |
0.1380 |
32 |
40 |
5/32 [#8] |
0.1640 |
32 |
36 |
3/16 [#10] |
0.1900 |
24 |
32 |
1/4 |
0.2500 |
20 |
28 |
5/16 |
0.3125 |
18 |
24 |
3/8 |
0.3750 |
16 |
24 |
7/16 |
0.4375 |
14 |
20 |
1/2 |
0.5000 |
13 |
20 |
9/16 |
0.5625 |
12 |
18 |
5/8 |
0.6250 |
11 |
18 |
3/4 |
0.7500 |
10 |
16 |
7/8 |
0.8750 |
9 |
14 |
1 |
1.0000 |
8 |
12, 14 |
1 1/8 |
1.1250 |
7 |
12 |
1 1/4 |
1.2500 |
7 |
12 |
1 3/8 |
1.3750 |
6 |
12 |
1 1/2 |
1.5000 |
6 |
12 |
1 3/4 |
1.7500 |
5 |
– |
US (inches) |
Metric (millimeters) |
US (inches) |
Metric (millimeters) |
---|---|---|---|
1/16 |
1.6 |
1-1/2 |
38 |
1/8 |
3.2 |
1-5/8 |
41 |
3/16 |
4.8 |
1-3/4 |
45 |
1/4 |
6.4 |
1-7/8 |
48 |
5/16 |
7.9 |
2 |
51 |
3/8 |
9.5 |
2-1/4 |
57 |
7/16 |
11 |
2-1/2 |
64 |
1/2 |
13 |
2-3/4 |
70 |
9/16 |
14 |
3 |
76 |
5/8 |
16 |
3-1/4 |
83 |
11/16 |
17 |
3-1/2 |
89 |
3/4 |
19 |
3-3/4 |
95 |
13/16 |
21 |
4 |
102 |
7/8 |
22 |
4-1/2 |
114 |
15/16 |
24 |
5 |
127 |
1 |
25 |
5-1/2 |
140 |
1-1/8 |
29 |
6 |
152 |
1-1/4 |
32 |
6-1/2 |
165 |
1-3/8 |
35 |
7 |
178 |
Metric to US Conversion Table
Metric (mm) |
US (in*) |
Metric (mm) |
US (in*) |
---|---|---|---|
2 |
3/32 |
55 |
2-3/16 |
2.5 |
3/32 |
60 |
2-3/8 |
3 |
1/8 |
65 |
2-9/16 |
4 |
5/32 |
70 |
2-3/4 |
5 |
3/16 |
75 |
2-15/16 |
6 |
1/4 |
80 |
3-1/8 |
8 |
5/16 |
85 |
3-3/8 |
10 |
13/32 |
90 |
3-9/16 |
12 |
15/32 |
95 |
3-3/4 |
14 |
9/16 |
100 |
3-15/16 |
16 |
5/8 |
110 |
4-5/16 |
18 |
23/32 |
120 |
4-3/4 |
20 |
25/32 |
130 |
5-1/8 |
25 |
1 |
140 |
5-1/2 |
30 |
1-3/16 |
150 |
5-7/8 |
35 |
1-3/8 |
160 |
6-6/16 |
40 |
1-9/16 |
170 |
6-11/16 |
45 |
1-3/4 |
180 |
7-1/16 |
50 |
2 |
190 |
7-1/2 |
Product Type | Metric Specification | Scope | ||
---|---|---|---|---|
DIN standard | ISO standard | ASME /ANSI | ||
HCS | 931 | 4014 | B18.2.3.1M | Partially Threaded |
933 | 4017 | Fully Threaded | ||
960 | 8765 | Partially Threaded (Fine) | ||
961 | 8676 | Partially Threaded (Fine) | ||
Hex Nuts | 934 | 4032 | B18.2.4.1M (style 1) | Classes 6, 8, & 10 |
SHCS | 912 | 4762 | B18.3.1 | |
BHSHCS | N/A | 7380 | B18.3.4M | |
FHSCS | N/A | 7991 | B18.3.5 |
Stainless Steel Composition | Stainless Steel Grade | Class | Minimum Tensile Strength in MPa | ||
---|---|---|---|---|---|
A | Austenitic fasteners | 1 | 18-8 | 50 | 500 (soft) |
2 | 18-8 | 70 | 700 (cold-worked) | ||
4 | 316 | 80 | 800 (high strength) | ||
F | Ferritic fasteners | 1 | 430 | 45 | 450 (soft) |
60 | 600 (cold-worked) | ||||
C | Martensitic fasteners | 1 | 410 | 50 | 500 (soft) |
4 | 416,416Se | 70 | 700 (hardened and tempered) | ||
110 | 1100 (hardened and tempered) (ASTM metric only) | ||||
3 | 431 | 80 | 800 (hardened and tempered) | ||
120 | 1200 (hardened and tempered) (ASTM metric only) | ||||
P | Precipitation-Hardening (ASTM metric only) | 1 | 630 (17/4) | 90 | 900 |
Type | Finish | Specification & Condition | Dia (in.) | 0.2% Yield Stress (ksi) | Min. Tensile Requirement | Shear Stress (ksi) | |
---|---|---|---|---|---|---|---|
Tensile Strength (ksi) | No Threads in Shear Plane | Threads in Shear Plane | |||||
302 304 316 |
Hot Finished | Condition A (Annealed) in ASTM A276-71 Class 1 (solution treated) in ASTM A193-71 |
all | 30 | 75 | 15 | 10.5 |
302 304 316 |
Cold Finished | Condition A (Annealed) in ASTM A276-71 | 45 | 90 | 18 | 12.6 | |
302 304 316 |
Cold Finished | Condition B (cold-worked) in ASTM A276-71 Class 2 (solution treated and strain hardened) in ASTM A193-71* |
100 | 125 | 25 | 17.5 |
M.S. HEX HALF THREAD BOLTS WITH NUTS
IN KGS FOR 100 NOS APPROXIMATE WEIGHT |
||||||||||
---|---|---|---|---|---|---|---|---|---|---|
AS PER IS 1363/67 MM THREADS |
||||||||||
LENGTH |
D I A |
|||||||||
M 6 |
M 5 |
M 8 |
M 12 |
M 10 |
M 16 |
M 14 |
M 20 |
M 18 |
M 22 |
|
16 mm | 0.743 | 0.448 | 1.590 | 3.211 | ||||||
20 mm | 0.812 | 0.598 | 1.711 | 4.892 | 3.411 | |||||
25 mm | 0.897 | 0.660 | 1.871 | 5.252 | 3.660 | 8.170 | ||||
30 mm | 1.010 | 0.737 | 2.070 | 5.574 | 3.912 | 10.707 | 9.690 | 18.657 | ||
35 mm | 1.120 | 0.804 | 2.271 | 5.974 | 4.223 | 11.416 | 10.000 | 19.608 | 16.026 | |
40 mm | 1.230 | 0.881 | 2.470 | 6.410 | 4.533 | 12.107 | 10.288 | 20.747 | 16.667 | |
45 mm | 1.340 | 0.958 | 2.671 | 6.859 | 4.840 | 12.821 | 10.504 | 21.739 | 17.241 | |
50 mm | 1.450 | 1.030 | 2.870 | 7.299 | 5.155 | 13.624 | 11.261 | 22.727 | 17.857 | 28.409 |
55 mm | 1.560 | 3.071 | 7.740 | 5.464 | 14.409 | 11.628 | 23.810 | 18.868 | 30.120 | |
60 mm | 1.670 | 3.270 | 8.183 | 5.774 | 15.244 | 12.255 | 25.126 | 20.000 | 32.051 | |
65 mm | 1.781 | 3.472 | 8.621 | 6.083 | 16.026 | 12.626 | 26.455 | 21.008 | 34.014 | |
70 mm | 1.890 | 3.671 | 9.058 | 6.394 | 16.835 | 12.987 | 27.778 | 22.124 | 35.461 | |
75 mm | 2.000 | 3.873 | 9.506 | 6.702 | 17.606 | 13.228 | 29.070 | 23.256 | 39.063 | |
80 mm | 2.111 | 4.072 | 10.000 | 7.013 | 18.248 | 13.889 | 30.303 | 24.510 | 40.000 | |
90 mm | 4.472 | 10.917 | 7.634 | 19.841 | 14.925 | 33.113 | 26.042 | 41.667 | ||
100 mm | 4.873 | 11.820 | 8.251 | 21.459 | 16.340 | 35.714 | 27.778 | 46.296 | ||
110 mm | 12.723 | 8.881 | 23.041 | 17.730 | 38.168 | 31.250 | 47.170 | |||
120 mm | 13.624 | 9.506 | 24.631 | 18.797 | 40.984 | 32.895 | 50.000 | |||
130 mm | 14.535 | 10.101 | 26.316 | 20.000 | 43.478 | 34.722 | 52.632 | |||
140 mm | 15.432 | 10.707 | 27.933 | 20.833 | 46.296 | 35.461 | 55.556 | |||
150 mm | 16.340 | 11.312 | 29.412 | 22.222 | 48.544 | 37.594 | 58.824 | |||
160 mm | 17.241 | 11.905 | 31.056 | 24.272 | 50.505 | 40.984 | 61.728 | |||
170 mm | 18.116 | 12.500 | 32.680 | 53.191 | 64.935 | |||||
180 mm | 19.011 | 13.123 | 34.247 | 26.882 | 55.556 | 67.568 | ||||
190 mm | 19.920 | 13.736 | 35.971 | 58.140 | 70.423 | |||||
200 mm | 20.833 | 14.327 | 37.594 | 29.586 | 60.976 | 49.020 | 73.529 | |||
220 mm | 22.624 | 15.528 | 40.650 | 65.789 | 79.365 | |||||
240 mm | 24.510 | 16.722 | 43.860 | 71.429 | 84.746 | |||||
250 mm | 25.381 | 17.301 | 45.455 | 74.627 | 87.719 | |||||
260 mm | 26.316 | 17.921 | 47.170 | 76.923 | 90.909 | |||||
280 mm | 28.090 | 19.157 | 50.505 | 81.967 | 98.039 | |||||
300 mm | 29.940 | 20.325 | 53.763 | 87.719 | 104.167 | |||||
320 mm | 31.646 | 56.818 | 92.593 | |||||||
340 mm | 33.557 | 60.241 | 98.039 | |||||||
360 mm | 35.211 | 63.291 | 104.167 | |||||||
380 mm | 37.037 | 66.667 | 108.696 | |||||||
400 mm | 39.063 | 69.444 | 113.636 |
AS PER BS 916/53 BSW THREADS |
|||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
FOR 100 NOS APPROXIMATE WEIGHT IN KGS |
|||||||||||||||
LENGTH |
D I A |
||||||||||||||
5/16″ |
1/4″ |
3/8″ |
1″ |
1/2″ |
7/16″ |
5/8″ |
1.1/8″ |
7/8″ |
3/4″ |
2″ |
1.3/4″ |
1.1/4″ |
1.1/2″ |
||
3/4″ | 1.111 | ||||||||||||||
1″ | 2.041 | 1.252 | 3.123 | 4.950 | |||||||||||
1.1/4″ | 2.281 | 1.401 | 3.458 | 7.692 | 5.388 | 13.966 | |||||||||
1.1/2″ | 2.523 | 1.556 | 3.797 | 8.306 | 5.875 | 14.925 | 29.240 | 23.810 | |||||||
1.3/4″ | 2.762 | 1.705 | 4.132 | 45.045 | 8.897 | 6.329 | 15.924 | 31.056 | 25.253 | ||||||
2″ | 3.003 | 1.864 | 4.468 | 47.619 | 9.506 | 6.793 | 16.949 | 32.680 | 26.882 | ||||||
2.1/4″ | 3.245 | 2.005 | 4.826 | 50.505 | 10.121 | 7.246 | 17.921 | 70.423 | 34.483 | 28.249 | |||||
2.1/2″ | 3.484 | 2.159 | 5.144 | 52.632 | 10.707 | 7.704 | 18.868 | 73.529 | 36.765 | 29.762 | 312.500 | 227.273 | 98.039 | 156.250 | |
3″ | 3.965 | 2.459 | 5.814 | 56.818 | 11.933 | 8.621 | 20.921 | 79.365 | 40.323 | 32.468 | 333.333 | 250.000 | 106.383 | 166.667 | |
3.1/2″ | 4.444 | 2.762 | 6.485 | 60.976 | 13.123 | 9.542 | 22.831 | 84.746 | 43.860 | 35.714 | 333.333 | 250.000 | 113.636 | 178.571 | |
4″ | 4.926 | 3.075 | 7.153 | 66.667 | 14.327 | 10.460 | 24.876 | 90.909 | 48.544 | 38.462 | 357.143 | 277.778 | 119.048 | 185.185 | |
4.1/2″ | 5.405 | 3.367 | 7.813 | 69.444 | 15.528 | 11.364 | 26.882 | 98.039 | 51.546 | 40.984 | 384.615 | 277.778 | 128.205 | 192.308 | |
5″ | 5.903 | 3.655 | 8.475 | 76.923 | 16.779 | 12.285 | 28.902 | 102.041 | 54.945 | 43.860 | 384.615 | 294.118 | 135.135 | 208.333 | |
5.1/2″ | 6.386 | 3.946 | 9.141 | 81.967 | 17.921 | 13.158 | 30.864 | 108.696 | 58.824 | 47.170 | 416.667 | 333.333 | 147.059 | 227.273 | |
6″ | 6.868 | 4.237 | 9.804 | 86.207 | 19.157 | 14.085 | 32.680 | 116.279 | 63.291 | 50.505 | 416.667 | 357.143 | 156.250 | 238.095 | |
7″ | 96.154 | 20.833 | 34.722 | 128.205 | 73.529 | 53.763 | 500.000 | 384.615 | 172.414 | 250.000 | |||||
8″ | 106.383 | 23.585 | 38.462 | 142.857 | 79.365 | 58.140 | 555.556 | 416.667 | 185.185 | 277.778 | |||||
9″ | 116.279 | 25.907 | 42.735 | 156.250 | 87.719 | 64.935 | 555.556 | 454.545 | 200.000 | 312.500 | |||||
10″ | 125.000 | 28.736 | 47.619 | 166.667 | 96.154 | 71.429 | 625.000 | 454.545 | 217.391 | 333.333 | |||||
11″ | 135.135 | 31.250 | 50.505 | 178.571 | 104.167 | 75.758 | 714.286 | 500.000 | 238.095 | 357.143 | |||||
12″ | 147.059 | 33.557 | 53.763 | 192.308 | 113.636 | 80.645 | 714.286 | 555.556 | 250.000 | 384.615 | |||||
14″ | 166.667 | 38.462 | 60.976 | 217.391 | 125.000 | 92.593 | 833.333 | 625.000 | 277.778 | 416.667 | |||||
16″ | 185.185 | 43.478 | 68.493 | 238.095 | 142.857 | 104.167 | 1,000.000 | 714.286 | 312.500 | 500.000 | |||||
18″ | 208.333 | 48.544 | 76.923 | 263.158 | 156.250 | 113.636 | 1,000.000 | 714.286 | 333.333 | 555.556 | |||||
20″ | 227.273 | 53.763 | 84.746 | 294.118 | 172.414 | 125.000 | 1,250.000 | 833.333 | 384.615 | 625.000 |