Threaded Rod are a very versatile piece of construction, and its employment could either be on a temporary basis or on a more permanent one, depending on its application. Generally, most Stainless Steel Threaded Rod Manufacturers In India recommend using them as pins to stabilize structures. Furthermore, because they offer stability for long durations, the Stainless Steel threaded rod may be used across varying materials, including wood, metal, or even something as dense as concrete.
The use of various stainless steel threaded rod grades will depend on several requirements of the application. Say, if an application requires high corrosion resistance and the location is near a coastal area, the use of a grade a4 m12 stainless steel threaded rod matches its requirements. A4, or as commonly known as alloy 316 is an austenitic alloy that has great corrosion resistance to saltwater. In coastal areas, the air evaporated has some amount of salt, which may get deposited ob some structures. Since salt is a highly corrosive media, the use of a 316 Stainless Steel Threaded Rod improves its longevity as the rate of decay slows down.
On the other hand, some applications may have been planned for the short term, and so the use of expensive materials is not feasible. These applications consider the use of A2-70 Threaded Rod. A2 or as known as grade 304 is an austenitic stainless steel alloy like grade 316, although alloy A2 is the more economical metal. Despite the fact that cheaper metals tend to have lesser qualities, the use of 304 Stainless Steel Threaded Rod in these applications contradicts this statement on several grounds. First, the mechanical properties of alloy 304 or A2 Stainless Steel Threaded Rod are better than most conventional steel. Second, the corrosion resistance properties of the alloy are adequate and so the use of a stainless steel threaded bar m12 in low cost, and short-term application is considered to be efficient.
before buy from india Compare Stainless Steel Threaded Rod price with Nickel Fasteners price list
Standards |
Designation |
|---|---|
| Thread Requirements o | ASME B1.1, UNC & UNF, Class 2A |
| Coatings | PTFE |
| Production Process | Wire Drawing, Cold Heading, Heat Treatment, Inspection, Packing, Insert tapping, Surface Plating |
| Heads | Hex, Square, Round, Hex flange, Flat, T-head & Triangular etc |
Dimensions |
ASME B18.2.1, B18.3 |
Extra Certificate |
PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified, |
| Neck | Hex, Square, Triangular, Oval & Knurled etc |
Origin of Melt |
East Europe/Korea/South America/ Japan |
Extra Need |
NACE MR0103 /MR0175 / ISO 15156 Compliance |
Configuration of Threads |
ASME B1.1 2A/3A Inch and B1.13M 6h Metric Coarse Threads |
Origin of Product |
Indian |
Certification |
As per ASME & ASTM Codes Dual Certified |
necessary need |
Free from Mercury Contamination and Radioactive |
| Description | Per Unit (INR) | Price in USD | Price in EURO |
|---|---|---|---|
| Type 316 Stainless Steel Threaded Rod 3/4-10 Thread, 1 Footlong, Packs Of 1 Pn:93250a017 | 1,795 | 24.28 | 20.43 |
| Type 18-8 Stainless Steel 1/4 28 Threaded Stud 8 Length ( 98805a 0291/4-28 Threaded Rod 2ft Long Passivate In | 834 | 11.28 | 9.49 |
| Mw 060000 5 Stainless Steel Thread Rod M8 1meter | 112 | 1.51 | 1.27 |
| Parts Of Machine : 148729 Threaded Rod Stainless Steel M12x124 | 1,788 | 24.18 | 20.35 |
| Steel Rod #07640-162 Threaded Rod M16x1000 Stainless Steel Din975 | 1,217 | 16.46 | 13.85 |
| Stainless Steel Fasteners-threaded Rod Grade:a4-70 Size:m33x1000 [56 Pcs] | 273 | 3.69 | 3.11 |
| M4 304 Stainless Steel |  |
| M5 304 Stainless Steel | |
| M6 304 Stainless Steel | |
| M8 304 Stainless Steel | |
| M10 304 Stainless Steel | |
| M12 304 Stainless Steel | |
| M16 304 Stainless Steel | |
| M20 304 Stainless Steel | |
| M24 304 Stainless Steel | |
| M3 316 Stainless Steel | |
| M4 316 Stainless Steel | |
| M5 316 Stainless Steel | |
| M6 316 Stainless Steel | |
| M8 316 Stainless Steel | |
| M10 316 Stainless Steel | |
| M12 316 Stainless Steel | |
| M14 316 Stainless Steel | |
| M16 316 Stainless Steel | |
| M18 316 Stainless Steel | |
| M20 316 Stainless Steel | |
| M22 316 Stainless Steel | |
| M24 316 Stainless Steel | |
| M27 316 Stainless Steel | |
| M30 316 Stainless Steel | |
| M33 316 Stainless Steel | |
| M36 316 Stainless Steel | |
Strength Class |
Min. UTS N/mm² |
Min. Yield N/mm² |
Elongation at Failure |
|---|---|---|---|
Class 50 |
500 |
210 |
0.6D |
Class 70 |
700 |
450 |
0.4D |
Class 80 |
800 |
600 |
0.3D |
Diameter (d) |
Pitch |
L |
|---|---|---|
M3 |
0.50 |
1000 |
M4 |
0.70 |
1000 |
M5 |
0.80 |
1000 |
M6 |
1.00 |
1000 |
M7 |
1.00 |
1000 |
M8 |
1.25 |
1000 |
M10 |
1.50 |
1000 |
M12 |
1.75 |
1000 |
M14 |
2.00 |
1000 |
M16 |
2.00 |
1000 |
M18 |
2.50 |
1000 |
M20 |
2.50 |
1000 |
M22 |
2.50 |
1000 |
M24 |
3.00 |
1000 |
| Malaysia, Thailand, Czechia, Germany | M14 X 1000 3.66 M DIN975 Stainless Steel SUS 304 Threaded Rod |
| Finland, Bangladesh, Malaysia, USA | Threaded Rod Stainless Steel 304 and 316, DIN975 DIN976 |
| Belgium, Philippines, Dammam -KSA, Indonesia | DIN975 Stainless Steel/ Zinc Plated /Hot DIP Galvanized Threaded Rod M6-M48 |
| Thailand, Europe, Qatar, France | DIN975 Stainless Steel SS 304 SS 316 Grade 8.8 10.9 Threaded Rod |
| Brazil, Kuwait, South Africa, Saudi Arabia (KSA) | Stainless Steel A2/A4 Special Threaded Rod with Hole |
| Nigeria, UK, Philippines, Australia | Stainless Steel DIN976 Threaded Rod |
| Singapore, Bahrain, South Africa | Stainless Steel DIN 975 Threaded Rod with Coarse Thread |
| UAE, Hong Kong, Oman, Malaysia | Stainless Steel 304/316 Threaded Rod M2-M20 |
| Singapore, Iran, Chile, Italy | DIN975 M10 Threaded Rod Stainless Steel SS 304 316 |
| Malaysia, Norway, United Arab Emirates (UAE), Turkey | Inch Stainless Steel Threaded Rod 9mm DIN975 |
| Dubai, Malaysia, Netherlands, Malaysia | Stud Bolt Full/Half Thread Anti-Corrosion Stainless Steel Threaded Rod DIN975/976 M6-M39 Customize |
| Philippines, Los Alamos -Mexico, Malaysia, Taiwan | DIN975 Stainless Steel 304 M10*100mm Threaded Rod |
| UK, Mexico,Egypt, Spain | Stainless Steel 304 316 Threaded Rod DIN975 M24X1000 |
| UAE, Malaysia, United Kingdom -UK, Europe | Threaded Ends Guide 3/4 Inch Stainless Steel Rod |
| Singapore, Canada, Philippines, Malaysia | Stainless Steel 304 316 Threaded Rod DIN975 M10X1000 |
| Ellington -United States, Poland, UK, Canada | Stud DIN975 Full Threaded Rod M3-M48 304 Stainless Steel |
| Malaysia, Romania, Europe, Japan | 304 Stainless Steel Threaded Rod 6m |
| Malaysia, NY 12203 (USA), Singapore, South Korea | Stainless Steel 316 M8 Double End Threaded Rod for Automation |
| China, Malaysia, Sweden, Colombia | Stainless Steel DIN975 Threaded Rod M8 M10 |
Fastener Thread Direction |
Length |
System of Measurement |
Fastener Thread Type |
|---|---|---|---|
Right Hand
|
1 ft. |
Inch |
UNC (Coarse) |
1 ft. |
Inch |
||
2 ft. |
Inch |
||
2 ft. |
Inch |
||
3 ft. |
Inch |
||
3 ft. |
Inch |
||
6 ft. |
Inch |
||
6 ft. |
Inch |
||
1 ft. |
Inch |
UNF (Fine) |
|
1 ft. |
Inch |
||
2 ft. |
Inch |
||
2 ft. |
Inch |
||
3 ft. |
Inch |
||
3 ft. |
Inch |
||
6 ft. |
Inch |
||
6 ft. |
Inch |
Chemicals |
Type 316 |
Type 304 |
|
|---|---|---|---|
Mg |
2.00% max |
2.00 % max |
|
M |
2.00-3.00% |
||
C |
0.08% max |
0.08% max |
|
N |
10.00-14.00 |
8.00-10.50% |
|
P |
0.045% max |
0.045% max |
|
S |
1.00% max |
1.00% max |
|
Su |
0.030% max |
0.030% max |
|
Ch |
16.00-18.00 |
18.00-20.00% |
| Designation | Minimum Thickness, in. |
|---|---|
| 3 | 00.0001 |
| 5 | 0.0002 |
| 8 | 0.0003 |
| 12 | 0.0005 |
| Thread | M5 | M4 | M6 | M8 | (M7) | M10 | (M18) | (M14) | M12 | M16 | (M22) | M20 | M24 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| - | - | - | - | - | - | - | - | M12x1,5 | - | - | - | - | |
| - | - | - | M8x1 | - | M10x1,25 | (M18x1,5) | (M14x1,5) | M12x1,25 | M16x1,5 | (M22x1,5) | M20x1,5 | M24x2 | |
| b2 l>200mm | - | - | - | - | - | 45 | 61 | 53 | 49 | 57 | 69 | 65 | 73 |
| b2 l<125mm | 16 | 14 | 18 | 22 | 20 | 26 | 42 | 34 | 30 | 38 | 50 | 46 | 54 |
| b1 | 6,5 | 5 | 7,5 | 10 | 9 | 12 | 22 | 18 | 15 | 20 | 28 | 25 | 30 |
| b2 125>l<200mm | 22 | 20 | 24 | 28 | 26 | 32 | 48 | 40 | 36 | 44 | 56 | 52 | 60 |
| x2 | 1 | 0,9 | 1,25 | 1,6 | 1,25 | 1,9 | 3,2 | 2,5 | 2,2 | 2,5 | 3,2 | 3,2 | 3,8 |
| x1 | 2 | 1,75 | 2,5 | 3,2 | 2,5 | 3,8 | 6,3 | 5 | 4,3 | 5 | 6,3 | 6,3 | 7,5 |
| l js 15 | Weight (7,85/dm3) per 1000 units, in | ||||||||||||
| kg | |||||||||||||
| 14 | |||||||||||||
| 12 | |||||||||||||
| 16 | |||||||||||||
| 20 | 2,03 | ||||||||||||
| 18 | |||||||||||||
| 22 | 3,65 | 2,23 | |||||||||||
| 25 | 4,11 | 2,52 | 5,85 | ||||||||||
| 28 | 4,57 | 2,82 | 6,52 | 9,49 | |||||||||
| 30 | 4,88 | 3,02 | 6,96 | 13,1 | 10,1 | ||||||||
| 35 | 5,65 | 3,51 | 8,07 | 15,1 | 11,6 | 24,2 | |||||||
| 40 | 6,42 | 4,01 | 9,18 | 17 | 13,1 | 27,2 | 41 | ||||||
| 45 | 7,19 | 10,2 | 19 | 14,6 | 30,3 | 64 | 45,4 | ||||||
| 50 | 7,96 | 11,4 | 21 | 16,1 | 33,3 | 70 | 49,9 | 94,9 | |||||
| 55 | 12,5 | 22,9 | 17,7 | 36,4 | 130 | 76,1 | 54,3 | 103 | |||||
| 60 | 13,6 | 24,9 | 19,2 | 39,5 | 140 | 82,1 | 58,8 | 111 | 180 | ||||
| 65 | 26,9 | 20,7 | 42,6 | 150 | 88,2 | 63,2 | 119 | 242 | 192 | ||||
| 70 | 28,9 | 22,2 | 45,7 | 160 | 94,2 | 67,6 | 126 | 257 | 205 | 305 | |||
| 75 | 30,8 | 48,8 | 170 | 100 | 72,1 | 134 | 272 | 217 | 323 | ||||
| 80 | 32,8 | 51,8 | 180 | 106 | 76,5 | 142 | 287 | 229 | 341 | ||||
| 85 | 54,9 | 190 | 112 | 81 | 150 | 302 | 241 | 358 | |||||
| 90 | 58 | 199 | 118 | 85,4 | 158 | 317 | 254 | 376 | |||||
| 95 | 61,1 | 210 | 124 | 89,8 | 166 | 332 | 266 | 394 | |||||
| 100 | 64,2 | 220 | 130 | 94,3 | 174 | 346 | 279 | 412 | |||||
| 110 | 240 | 143 | 103 | 190 | 376 | 303 | 447 | ||||||
| 120 | 260 | 155 | 112 | 205 | 406 | 328 | 483 | ||||||
| 130 | 280 | 167 | 221 | 436 | 353 | 518 | |||||||
| 140 | 300 | 179 | 237 | 466 | 377 | 554 | |||||||
| 150 | 320 | 253 | 496 | 402 | 589 | ||||||||
| 160 | 340 | 269 | 525 | 427 | 625 | ||||||||
| 170 | 360 | 555 | 451 | 660 | |||||||||
| 180 | 380 | 585 | 476 | 696 | |||||||||
| 190 | 615 | 501 | 731 | ||||||||||
| 200 | 645 | 525 | 767 |
| Thread d | M30 | (M27) | M36 | (M52) | (M33) | (M39) | (M45) | M42 | M48 |
|---|---|---|---|---|---|---|---|---|---|
| M30x2 | (M27x2) | M36x3 | (M52x3) | (M33x2) | (M39x3) | (M45x3) | M42x3 | M48x3 | |
| b2 l<125mm | 66 | 60 | 78 | 110 | 72 | 84 | 96 | 90 | 102 |
| b1 | 38 | 35 | 45 | 65 | 42 | 50 | 58 | 52 | 60 |
| b2 125>l<200mm | 72 | 66 | 84 | 116 | 78 | 90 | 102 | 96 | 108 |
| l js 15 | Weight (7,85/dm3) per 1000 units, in | ||||||||
| x1 | 9 | 7,5 | 10 | 12,5 | 9 | 10 | 11 | 11 | 12,5 |
| b2 l>200mm | 85 | 79 | 97 | 129 | 91 | 103 | 115 | 109 | 121 |
| x2 | 4,5 | 3,8 | 5 | 6,3 | 4,5 | 5 | 5,5 | 5,5 | 6,3 |
| kg | |||||||||
| 50 | |||||||||
| 55 | |||||||||
| 60 | |||||||||
| 70 | |||||||||
| 75 | 430 | ||||||||
| 80 | 452 | ||||||||
| 85 | 591 | 475 | |||||||
| 90 | 619 | 497 | 776 | ||||||
| 95 | 646 | 520 | 810 | ||||||
| 100 | 674 | 542 | 1011 | 843 | |||||
| 110 | 730 | 587 | 1091 | 910 | 1326 | ||||
| 120 | 785 | 632 | 1171 | 977 | 1420 | 1963 | 1647 | ||
| 130 | 841 | 677 | 1251 | 1045 | 1514 | 2088 | 1756 | 2364 | |
| 140 | 896 | 722 | 1331 | 3027 | 1112 | 1607 | 2213 | 1865 | 2506 |
| 150 | 952 | 767 | 1411 | 3794 | 1179 | 1701 | 2338 | 1973 | 2648 |
| 160 | 1007 | 812 | 1490 | 3360 | 1246 | 1795 | 2462 | 2082 | 2790 |
| 170 | 1062 | 857 | 1570 | 3527 | 1313 | 1889 | 2587 | 2191 | 2932 |
| 180 | 1118 | 902 | 1650 | 3694 | 1380 | 1982 | 2712 | 2300 | 3074 |
| 190 | 1173 | 947 | 1730 | 3861 | 1447 | 2076 | 2837 | 2408 | 3216 |
| 200 | 1229 | 992 | 1810 | 4027 | 1515 | 2170 | 2962 | 2517 | 3358 |
| 220 | 1340 | 1082 | 1970 | 4361 | 1649 | 2358 | 3211 | 2735 | 3642 |
| 240 | 1450 | 1172 | 2130 | 4694 | 1784 | 2545 | 3461 | 2952 | 3927 |
| 260 | 1562 | 1262 | 2289 | 5028 | 1918 | 2733 | 3711 | 3170 | 4211 |
| 280 | 1672 | 1352 | 2449 | 5361 | 2052 | 2920 | 3961 | 3387 | 4495 |
| 300 | 1784 | 2609 | 5694 | 2186 | 3108 | 4210 | 3605 | 4779 | |
| 320 | 2769 | 6028 | 2321 | 3295 | 4460 | 3822 | 5063 | ||
| 340 | 2929 | 6361 | 2455 | 3483 | 4710 | 4040 | 5347 | ||
| 360 | 3088 | 6695 | 3670 | 4959 | 4257 | 5631 | |||
| 380 | 7028 | 3858 | 5209 | 4475 | 5915 | ||||
| 400 | 7362 | 4045 | 5459 | 4692 | 6199 |
| Designation | Type | Typical Appearance |
|---|---|---|
| A | Clear | Transparent colorless with slight iridescence |
| B | Blue-Bright | Transparent with a bluish tinge and slight iridescence |
| C | Yellow | Yellow iridescent |
| D | Opaque | Olive green, shading to brown or bronze |
| E | Black | Black with slight iridescence |
| F | Organic | Any of the above plus organic topcoat |
| 3/8″-16 x 1-1/2″ | 3/8″-16 x 1-1/4″ | 3/4″-10 x 3″ |
| 1/2″-13 x 3″ | 1/2″-13 x 2-1/2″ | 5/16″-18 x 1″ |
| 3/8″-16 x 1″ | 5/8″-11 x 3″ | 3/8″-16 x 3/4″ |
| 1/2″-13 x 1-1/2″ | 1/2″-13 x 2″ | 5/16″-18 x 1-1/4″ |
| 1/4″-20 x 1″ | 3/8″-16 x 2″ | 5/8″-11 x 4″ |
| 5/8″-11 x 2-1/2″ | 3/8″-16 x 2-1/2″ | 3/8″-16 x 3″ |
| 1/2″-13 x 1-1/4″ |
| Designation | Type |
|---|---|
| Fe/Zn | Zinc |
| Fe/Cd | Cadmium |
| Fe/Zn-Co | Zinc Cobalt Alloy |
| Fe/Zn-Ni | Zinc Nickel Alloy |
| Fe/Zn-Fe | Zinc Iron Alloy |
Size Range |
.250" up to and including 15.00" Diameter |
||
|---|---|---|---|
Stock Lengths |
3 foot 6 foot 12 foot |
||
Special Order |
Custom lengths up to 50 Ft. Full Thread, Double End and Single End Parts |
||
Materials |
|
||
Thread Profiles |
|
||
Class Fit |
|
||
Thread Direction |
Right Hand Left Hand |
||
Thread Start |
Single Multiple |
| Stainless Steel 304 Threaded Rod | 316H Stainless Steel Threaded Rod |
| A4-70 Threaded Rod | 316 Stainless Threaded Rod |
| 316L SSThreaded Rod | SS Threaded Bars |
| 316 Stainless Steel Threaded Rod | UNS S30400 Threaded Rod |
| 18-8 Threaded Rod | 304 SS Threaded Rod |
| ASTM A193 304 Steel Threaded Rod | DIN 939 Stud |
| 17-4 PH Threaded Rod | SS 304 Hex Threaded Bar |
| AISI Stainless Steel Threaded Bar Stocks | ASTM A276 AISI Stainless Steel Threaded Bars |
Sizes |
Per Tube Pieces |
Weight Per 100′ |
|---|---|---|
5/16-18 |
35 |
20.1 |
3/8-16 |
25 |
29.6 |
1/2-13 |
12 |
53.9 |
1/4-20 |
50 |
12.3 |
7/16-14 |
17 |
40.6 |
9/16-12 |
10 |
67.6 |
3/4-10 |
5 |
124.9 |
5/8-11 |
8 |
85.2 |
7/8-9 |
4 |
172.4 |
1 1/4-7 |
1 |
357.6 |
1 1/8-7 |
1 |
284.2 |
1-8 |
2 |
225.6 |
1 1/8-8 |
1 |
290.9 |
1 1/4-8 |
1 |
365.8 |
1 1/2-6 |
1 |
517.8 |
1 3/4-5 |
1 |
703.0 |
1 1/2-8 |
1 |
539.7 |
2″-4 1/2 |
1 |
922.0 |
Thread |
Weight per metre |
Strength |
|||
|---|---|---|---|---|---|
Class 70 |
Class 80 |
||||
0.2% proof |
UTS |
0.2% proof |
UTS |
||
Kg/m |
kN |
kN |
kN |
kN |
|
M12 |
0.72 |
41.0 |
64.0 |
54.0 |
73.0 |
M16 |
1.31 |
70.7 |
109.9 |
94.2 |
125.6 |
M20 |
2.05 |
110.3 |
171.5 |
147.0 |
196.0 |
M24 |
2.96 |
158.9 |
247.1 |
211.8 |
282.4 |
M27 |
3.83 |
206.6 |
321.3 |
275.4 |
367.2 |
M30 |
4.70 |
252.6 |
392.7 |
336.6 |
448.8 |
M33 |
5.78 |
312.3 |
485.8 |
416.4 |
555.2 |
M36 |
6.84 |
367.7 |
571.9 |
490.2 |
653.6 |
M39 |
8.14 |
439.2 |
683.2 |
585.6 |
780.8 |
M42 |
9.38 |
504.5 |
784.7 |
672.6 |
896.6 |
M45 |
10.90 |
587.7 |
914.2 |
783.6 |
1044.8 |
M48 |
12.32 |
662.9 |
1031.1 |
883.8 |
1178.4 |
M52 |
14.65 |
791.1 |
1230.6 |
1054.8 |
1406.4 |
