compare Stainless Steel Welded Pipe price with Stainless Steel Seamless Pipe price list
Several stainless steel alloys can be easily welded using various conventional techniques. However, the most favorable alloy according to every Stainless Steel Welded Pipe Manufacturer in India is a low carbon containing one. Low carbon alloys prevent the formation of carbide precipitates on the grain. And therefore, any low carbon version of Large Diameter Stainless Steel Welded Pipe including alloys like 304, 316, 310, etc tends to have more optimized weldability properties in addition to not becoming vulnerable to intergranular corrosion.
This corrosion is generally a problem in a high carbon Stainless Steel Erw Pipe, because at high temperatures, the weld seam may get sensitized and form carbide precipitates. Generally, a Stainless Steel Welded Pipe that is used at high temperature gives off steam and are under high pressure during the transportation of various fluid or gas media. And so it is important that the buyer select the appropriate Stainless Steel Welded Pipe Pressure Rating, something that matches the pressure of the application. Aside from the pressure rating, another important aspect of piping is its size. Keeping in mind that the environment also influences the application, the use of a correct Stainless Steel Welded Pipe Size is a must.
Heat and cold are conditions that cause either an expansion or contraction of the metal. Depending on the weather, the Stainless Steel Welded Pipe Astm A312 may also undergo rapid degeneration. For instance, heat and humidity in combination with the high-temperature application could cause rapid decay of the Stainless Steel Efw Pipe by oxidation. On some occasions, the chemicals present in the atmosphere affect the pipes as well. It is possible to reduce corrosion of Duty On Stainless Steel Welded Pipe by not only selecting the correct alloy but also external finishes such as polishing, galvanizing, or electroplating to remove any excess contamination. These methods either completely coat the Astm A312 Welded Pipe or the process scrapes off the remnants to give a smoother surface and a protective layer as well.
Los Alamos -Mexico, Egypt, Mexico, Malaysia | Custom Size 8 Inch Stainless Steel Welded Pipe |
Malaysia, Netherlands, Russia, Sweden, Brazil | Decorative 6 inch welded polished stainless steel pipe |
NY 12203 (USA), United Kingdom -UK, Malaysia, Singapore | 20mm diameter stainless steel welded pipe mirror polished |
Romania, United Arab Emirates (UAE), Norway, Europe | Customized 2b surface welded stainless steel pipe |
Philippines, UK, Poland, Dammam -KSA | Square / Rectangle Stainless Steel welded Pipe |
Thailand, Malaysia, Japan, Czechia | micro/capillary thin wall stainless steel welded pipe |
Canada, Nigeria, Australia, Ellington -United States | Thickness 9.0mm welded stainless steel pipe |
Europe, Singapore, Malaysia, Qatar | 4 Inch Stainless Steel Welded Pipe |
Canada, Chile, Iran, Philippines | Small Diameter 10MM Round Threaded Stainless Steel Welded Pipe |
Kuwait, Philippines, Taiwan, South Africa | ASTM A312/A213 Cold/Hot Rolling Pickling Welded Stainless Steel Pipe |
Hong Kong, Thailand, France, Oman | ASTM Standard 200/300/400 Series Welded Stainless Steel Pipe |
Bangladesh, China, Colombia, Malaysia | 80*1.5*6000mm Polished Stainless Steel Welded pipe |
UK, Belgium, Indonesia, Philippines | 19mm stainless steel welded pipe |
Singapore, Malaysia, South Korea, Bahrain | Thickness 5 Inch Stainless Steel ERW Pipe |
Turkey, Malaysia, Germany | welded medical stainless steel precision pipe 0.32mm*0.1mm |
Italy, UAE, Malaysia, Singapore | 6 inch stainless steel welded pipe |
Spain, Brazil, Saudi Arabia (KSA), UK | decorative 3 inch welded stainless steel pipe |
Malaysia, Finland, USA, Dubai | 200x200 35x35 Welded Stainless Steel Rectangular/Square Pipe |
Europe, Singapore, South Africa, UAE | micro/capillary thin wall stainless steel welded pipe |
Standard Specifications | ASTM A268, A213, A270, A778, A312, A249,A269, |
Welded Pipes Sch | SCH60, SCH120, SCH80, STD, SCH30, SCH20, XS, XXS, SCH80, SCH140, SCH40, SCH160 |
Dimensions | ASME, ASTM, and API |
Grade | 321H, Duplex, 321, UNS31803 310S, 316Ti, 304L, 316L, 304H, 316, 347, 304, 347H |
Available Type | Fabricated, ERW , Welded , LSAW Pipes |
End | Plain End, Beveled End, Treaded |
Welded Pipes Form | Round, Square, Rectangular, HydraulicEtc |
Condition | Hot Finish, Cold Finish, Bright Annealed, Polished, Welded Annealed & Pickled, Externally Polished, Welded Cold Drawn Annealed & Pickled, Stress Relived, Passivated |
Size | 1/4” Outside Diameter to 36” Outside Diameter and 1/8” Nominal Bore to 36” Nominal Bore or as per requirment |
Reports | PMI Test Reports or Other Test Reports, 100% X-Ray Welding Reports, NABL Approved Lab Report, NDT, EN 10204 3.1 Certificate |
Finish | No.1 Pickled Finish, No.4 finish, BA Finish, Electropolished Welded Pipes |
Welded Pipes Thickness | as per ANSI B36.19/36.10 1 milimeter to 20 milimeter , 120/120S ,5/5S, SCH 10/10S, 160/160S, 20/20S, 40/40S, 80/80S |
Length | Single and Double Random & Cut Length. |
Welded Pipes Grade | Mn | C | Fe | P | Si | S | Mo | Ti | Cr | N | Ni | |
304 | minimum | 18.00 | 8.00 | |||||||||
maximum | 2.00 | 0.008 | 0.0045 | 0.075 | 0.0030 | 20.00 | 0.010 | 10.05 | ||||
304L | minimum | 18.00 | 8.00 | |||||||||
maximum | 2.00 | 0.0030 | 0.0045 | 0.075 | 0.0030 | 20.00 | 0.010 | 12.00 | ||||
304H | minimum | 0.004 | 18.00 | 8.00 | ||||||||
maximum | 2.00 | 0.0010 | 0.0045 | 0.075 | 0.0030 | 20.00 | 10.05 | |||||
SS 310 | 2 maximum | 0.0015 maximum | 0.0020 maximum | 0.0015 maximum | 0.0015 maximum | 0.010 maximum | 24.000 26.000 | 54.07 minimum | 19.000 21.000 | |||
SS 310S | 2 maximum | 0.008 maximum | 0.0045 maximum | 1.000 maximum | 0.0030 maximum | 0.075 maximum | 24.000 26.000 | 53.0095 minimum | 19.000 21.000 | |||
SS 310H | 2 maximum | 0.004 0.010 | 0.0045 maximum | 1.000 maximum | 0.0030 maximum | 24.000 26.000 | 53.0885 minimum | 19.000 21.000 | ||||
316 | minimum | 2.003.00 | 16.00 | 10.00 | ||||||||
maximum | 2.00 | 0.0035 | 0.0045 | 0.075 | 0.0030 | 18.00 | 14.00 | |||||
316L | minimum | 2.003.00 | 16.00 | 10.00 | ||||||||
maximum | 2.00 | 0.0035 | 0.0045 | 0.075 | 0.0030 | 18.00 | 14.00 | |||||
316TI | 10.000 14.000 | 0.008 maximum | 0.0045 maximum | 2.00 maximum | 0.0030 maximum | 0.075 maximum | 16.000 18.000 | 2.000 3.000 | ||||
317 | 2 maximum | 0.008 maximum | 57.0845 minimum | 0.0045 maximum | 1 maximum | 0.0030 maximum | 3.000 4.000 | 18.000 20.000 | ||||
SS 317L | 2.00 maximum | 0.0035 maximum | 57.089 minimum | 0.0045 maximum | 1.00 maximum | 0.0030 maximum | 3.000 4.000 | 18.000 20.000 | 11.000 15.000 | |||
SS 321 | 2.00 maximum | 0.008 maximum | 0.0045 maximum | 1.00 maximum | 0.0030 maximum | 5(C+N) 0.070 maximum | 17.000 19.000 | 0.010 maximum | 9.000 12.000 | |||
SS 321H | 2.00 maximum | 0.004 0.010 | 0.0045 maximum | 1.00 maximum | 0.0030 maximum | 4(C+N) 0.070 maximum | 17.000 19.000 | 0.010 maximum | 9.000 12.000 | |||
347/ 347H | 2.00 maximum | 0.008 maximum | 0.0045 maximum | 1.00 maximum | 0.0030 maximum | 17.000 20.000 | 9.00013.000 | |||||
410 | minimum | 11.05 | ||||||||||
maximum | 1.00 | 0.015 | 0.0040 | 1.000 | 0.0030 | 13.05 | 0.075 | |||||
446 | minimum | 23.00 | 0.010 | |||||||||
maximum | 1.05 | 0.02 | 0.0040 | 0.075 | 0.0030 | 30.00 | 0.025 | 0.050 | ||||
904L | minimum | 4.000 | 19.00 | 0.010 | 23.000 | |||||||
maximum | 2.000 | 0.020 | 0.0045 | 1.000 | 0.0035 | 5.000 | 23.00 | 0.025 | 28.000 |
Welded Pipes Grade | Density | Tensile Strength | Elongation | Melting Point | Yield Strength |
304H | 8.0 g/centimeter3 | MPa 515, Psi 75000 | 40 % | (2550 °F) 1400 °C | MPa 205, Psi 30000 |
304/ 304L | 8.0 g/centimeter3 | MPa 515, Psi 75000 | 35 % | (2550 °F) 1400 °C | MPa 205, Psi 30000 |
904L | 7.95 g/centimeter3 | MPa 490, Psi 71000 | 35 % | (2460 °F) 1350 °C | MPa 220, Psi 32000 |
306/ 316H | 8.0 g/centimeter3 | MPa 515, Psi 75000 | 35 % | (2550 °F) 1400 °C | MPa 205, Psi 30000 |
310 / 310S / 310H | 7.9 g/centimeter3 | MPa 515, Psi 75000 | 40 % | (2555 °F) 1402 °C | MPa 205, Psi 30000 |
316L | 8.0 g/centimeter3 | MPa 515, Psi 75000 | 35 % | (2550 °F) 1399 °C | MPa 205, Psi 30000 |
321 | 8.0 g/centimeter3 | MPa 515, Psi 75000 | 35 % | (2650 °F) 1457 °C | MPa 205, Psi 30000 |
317 | 7.9 g/centimeter3 | MPa 515, Psi 75000 | 35 % | (2550 °F)1400 °C | MPa 205, Psi 30000 |
347 | 8.0 g/centimeter3 | MPa 515, Psi 75000 | 35 % | (2650 °F) 1454 °C | MPa 205, Psi 30000 |
Welded Pipes STANDARD | AFNOR | UNS | WERKSTOFF NR. | JIS | GOST | BS | EN |
SS 304L | Z3CN18‐10 | S30403 | 1.4306 / 1.4307 | SUS 304L | 03Х18Н11 | 3304S11 | X2CrNi18-9 / X2CrNi19-11 |
SS 310 | – | S31000 | 1.4841 | SUS 310 | 20Ch25N20S2 | 310S24 | X15CrNi25-20 |
SS 304H | – | S30409 | 1.4301 | – | – | – | – |
SS 304 | Z7CN18‐09 | S30400 | 1.4301 | SUS 304 | 08Х18Н10 | 304S31 | X5CrNi18-10 |
SS 310S | – | S31008 | 1.4845 | SUS 310S | 20Ch23N18 | 310S16 | X8CrNi25-21 |
SS 310H | – | S31009 | – | – | – | – | – |
SS 316L | Z3CND17‐11‐02 / Z3CND18‐14‐03 | S31603 | 1.4404 / 1.4435 | SUS 316L | 03Ch17N14M3 / 03Ch17N14M2 | 316S11 / 316S13 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
SS 316H | – | S31609 | 1.4401 | – | – | – | – |
SS 316 | Z7CND17‐11‐02 | S31600 | 1.4401 / 1.4436 | SUS 316 | – | 316S31 / 316S33 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
SS 316Ti | Z6CNDT17‐123 | S31635 | 1.4571 | SUS 316Ti | 08Ch17N13M2T | 320S31 | X6CrNiMoTi17-12-2 |
SS 317 | – | S31700 | 1.4449 | SUS 317 | – | – | – |
SS 321 | – | S32100 | 1.4541 | SUS 321 | – | – | X6CrNiTi18-10 |
SS 317L | – | S31703 | 1.4438 | SUS 317L | – | – | X2CrNiMo18-15-4 |
SS 321H | – | S32109 | 1.4878 | SUS 321H | – | – | X12CrNiTi18-9 |
SS 347H | – | S34709 | 1.4961 | SUS 347H | – | – | X6CrNiNb18-12 |
SS 347 | – | S34700 | 1.4550 | SUS 347 | 08Ch18N12B | – | X6CrNiNb18-10 |
SS 904L | Z2 NCDU 25-20 | N08904 | 1.4539 | SUS 904L | STS 317J5L | 904S13 | X1NiCrMoCu25-20-5 |
OD Inches | Pipe Size | TRUE 5 | 5s | TRUE 40 | 40s and STD | 30 | 20 | 60 | TRUE 10 | 10s |
---|---|---|---|---|---|---|---|---|---|---|
0.0405 | 1/8 | 0.035 | 0.00068 | 0.00068 | 0.00049 | 0.00049 | ||||
0.01383 | 0.02447 | 0.02447 | 0.01863 | 0.01863 | ||||||
0.054 | 1/4 | 0.00049 | 0.00088 | 0.00088 | 0.00065 | 0.00065 | ||||
0.0257 | 0.04248 | 0.04248 | 0.03297 | 0.03297 | ||||||
0.0675 | 3/8 | 0.00049 | 0.00091 | 0.00091 | 0.00065 | 0.00065 | ||||
0.03276 | 0.05676 | 0.05676 | 0.04235 | 0.04235 | ||||||
0.084 | 1/2 | 0.00065 | 0.00065 | 0.0109 | 0.0109 | 0.00083 | 0.00083 | |||
0.05383 | 0.05383 | 0.0851 | 0.0851 | 0.0671 | 0.0671 | |||||
1.005 | 3/4 | 0.00065 | 0.00065 | 0.0113 | 0.0113 | 0.00083 | 0.00083 | |||
0.06838 | 0.06838 | 1.0131 | 1.0131 | 0.08572 | 0.08572 | |||||
1.0315 | 1 | 0.00065 | 0.00065 | 0.0133 | 0.0133 | 0.019 | 0.0109 | |||
0.08678 | 0.08678 | 1.0679 | 1.0679 | 1.0404 | 1.0404 | |||||
1.066 | 1 1/4 | 0.00065 | 0.00065 | 0.014 | 0.014 | 0.0109 | 0.0109 | |||
1.0107 | 1.0107 | 2.0273 | 2.0273 | 1.0806 | 1.0806 | |||||
1.09 | 1 1/2 | 0.00065 | 0.00065 | 0.0145 | 0.0145 | 0.0109 | 0.0109 | |||
1.0274 | 1.0274 | 2.0718 | 2.0718 | 2.0638 | 2.0638 | |||||
2.0375 | 2 | 0.00065 | 0.00065 | 0.0154 | 0.0154 | 0.0109 | 0.0109 | |||
1.0604 | 1.0604 | 3.0653 | 3.0653 | 2.0638 | 2.0638 | |||||
2.0875 | 2 1/2 | 0.00083 | 0.00083 | 0.0203 | 0.0203 | 0.012 | 0.012 | |||
2.0475 | 2.0475 | 5.0793 | 5.0793 | 3.0531 | 3.0531 | |||||
3.05 | 3 | 0.00083 | 0.00083 | 0.0216 | 0.0216 | 0.012 | 0.012 | |||
3.0029 | 3.0029 | 7.0576 | 7.0576 | 4.0332 | 4.0332 | |||||
4 | 3 1/2 | 0.00083 | 0.00083 | 0.0226 | 0.0226 | 0.012 | 0.012 | |||
3.0472 | 3.0472 | 9.0109 | 9.0109 | 4.097 | 4.097 | |||||
4.05 | 4 | 0.00083 | 0.00083 | 0.0237 | 0.0237 | 0.0281 | 0.012 | 0.012 | ||
3.0915 | 3.0915 | 10.079 | 10.079 | 12.066 | 5.0613 | 5.0613 | ||||
5 | 4 1/2 | 0.0247 | ||||||||
12.053 | ||||||||||
5.0563 | 5 | 0.0109 | 0.0109 | 0.0258 | 0.0258 | 0.0134 | 0.0134 | |||
6.0349 | 6.0349 | 14.062 | 14.062 | 7.077 | 7.077 | |||||
6.0625 | 6 | 0.0109 | 0.0109 | 0.028 | 0.028 | 0.0134 | 0.0134 | |||
7.0585 | 7.0585 | 18.097 | 18.097 | 9.0289 | 9.0289 | |||||
7.0625 | 7 | 0.0301 | ||||||||
23.057 | ||||||||||
8.0625 | 8 | 0.0109 | 0.0109 | 0.0322 | 0.0322 | 0.0277 | 0.025 | 0.0406 | 0.0148 | 0.0148 |
9.0914 | 9.0914 | 28.055 | 28.055 | 24.07 | 22.036 | 35.064 | 13.04 | 13.04 | ||
9.0625 | 9 | 0.0342 | ||||||||
33.09 | ||||||||||
10.075 | 10 | 0.0134 | 0.0134 | 0.0365 | 0.0365 | 0.0307 | 0.025 | 0.05 | 0.0165 | 0.0165 |
15.019 | 15.019 | 40.048 | 40.048 | 34.024 | 28.004 | 54.074 | 18.065 | 18.065 | ||
11.075 | 11 | 0.0375 | ||||||||
45.055 | ||||||||||
12.075 | 12 | 0.0165 | 0.0156 | 0.0406 | 0.0375 | 0.033 | 0.025 | 0.0562 | 0.018 | 0.018 |
22.018 | 21.007 | 53.053 | 49.056 | 43.077 | 33.038 | 73.016 | 24.02 | 24.02 | ||
16 | 16 | 0.0165 | 0.05 | 0.0375 | 0.0375 | 0.0312 | 0.0656 | 0.025 | 0.0188 | |
27.09 | 82.077 | 62.058 | 62.058 | 52.036 | 107.05 | 42.005 | 31.075 | |||
14 | 14 | 0.0156 | 0.0437 | 0.0375 | 0.0375 | 0.0312 | 0.0593 | 0.025 | 0.0188 | |
23.006 | 63.067 | 54.057 | 54.057 | 45.068 | 84.091 | 36.071 | 27.073 | |||
20 | 20 | 0.0188 | 0.0593 | 0.0375 | 0.05 | 0.0375 | 0.0812 | 0.025 | 0.0218 | |
39.078 | 122.09 | 78.06 | 104.01 | 78.06 | 166.04 | 52.073 | 46.005 | |||
18 | 18 | 0.0165 | 0.0562 | 0.0375 | 0.0437 | 0.0312 | 0.075 | 0.025 | 0.0188 | |
31.043 | 104.08 | 70.059 | 82.006 | 59.003 | 138.02 | 47.039 | 35.076 | |||
26 | 26 | 0.0375 | 0.05 | 0.0312 | ||||||
102.06 | 136.02 | 85.06 | ||||||||
24 | 24 | 0.0218 | 0.0687 | 0.0375 | 0.0562 | 0.0375 | 0.0968 | 0.025 | 0.025 | |
55.037 | 171.02 | 94.062 | 140.08 | 94.062 | 238.01 | 63.041 | 63.041 | |||
30 | 30 | 0.025 | 0.0375 | 0.0625 | 0.05 | 0.0312 | 0.0312 | |||
79.043 | 118.06 | 196.01 | 157.05 | 98.093 | 98.093 | |||||
42 | 42 | 0.0375 | ||||||||
166.07 | ||||||||||
28 | 28 | 0.0375 | 0.0625 | 0.05 | 0.0312 | |||||
110.06 | 182.07 | 146.08 | 92.026 | |||||||
34 | 34 | 0.0688 | 0.0375 | 0.0625 | 0.05 | 0.0312 | ||||
244.08 | 134.07 | 222.08 | 178.09 | 112.03 | ||||||
32 | 32 | 0.0688 | 0.0375 | 0.0625 | 0.05 | 0.0312 | ||||
230.01 | 126.07 | 209.04 | 168.02 | 105.06 | ||||||
40 | 40 | 0.0375 | ||||||||
158.07 | ||||||||||
36 | 36 | 0.075 | 0.0375 | 0.0625 | 0.0312 | |||||
282.03 | 142.07 | 236.01 | 118.09 | |||||||
48 | 48 | 0.0375 | ||||||||
190.07 |
Outside Diamter of Welded Pipes | Product | Wall Thickness | |
12.7 milimeter* 12.7 milimeter to 300 milimeter* 300 milimeter | Stainless Steel Square Pipe | 0.5 milimeter to 30 milimeter | |
6 milimeter to 630 milimeter | Stainless Steel Round Pipe | 0.5 milimeter to 30 milimeter | |
10*20 milimeter to 100*200 milimeter | Stainless Steel Rectangular Pipe | 0.5 milimeter to 30 milimeter | |
12.7 milimeter to 76.2 milimeter | Stainless Steel Ornamental Pipe | 0.5 milimeter to 2.0 milimeter | |
6 milimeter to 630 milimeter | Stainless Steel Colour Coated Pipe | 0.5 milimeter to 30 milimeter | |
12.7 milimeter to 250 milimeter | Stainless Steel Electropolished Pipes | 0.5 milimeter to 30 milimeter | |
16 milimeter to 85 milimeter | Stainless Steel Pipe | 0.5 milimeter to 3.0 milimeter | |
12.7 milimeter to 76.2 milimeter | Stainless Steel Slot Round Pipe | 0.5 milimeter to 2.0 milimeter | |
13 milimeter to 85 milimeter | Stainless Steel Hexagonal Pipe | 0.5 milimeter to 2.0 milimeter | |
20 milimeter to 200 milimeter | Stainless Steel Pipe | 0.5 milimeter to 2.0 milimeter | |
12.7 milimeter to 100 milimeter | SS Polished Pipes | 0.5 milimeter to 2.0 milimeter | |
22 milimeter*0.7 milimeter to 108 milimeter*2.0 milimeter | Thin to Wall Stainless Steel Pipe | 0.5 milimeter to 2.0 milimeter | |
0.28 milimeter to 10 milimeter | Stainless Steel Pipe | 0.08 milimeter – 1.2 milimeter | |
12.5 milimeter to 203.2 milimeter | Inner/Outside Polished Stainless Steel Pipe | 1.0 milimeter – 5 milimeter | |
6 milimeter to 430 milimeter | Stainless Steel Seamless Pipe | 0.8 milimeter – 30 milimeter |
HS Code | Welded Pipes Description |
---|---|
73053990 | Grade 316 Stainless Steel Secondary / Defective Welded Pipes |
73053990 | Grade 304 Stainless Steel Defective Welded Pipe |
73053990 | Grade 201 (Nickel Below 1%) Stainless Steel Welded Pipe |
73053990 | Grade 316 Stainless Steel Secondary / Defective Welded Pipes |
73053990 | Stainless Steel Welded Defective Pipes & Tubes Grade: 304 |
73053990 | Stainless Steel Defective Welded Pipes Grade 316 |
73053990 | Grade 304 Stainless Steel Welded Defective Pipes |
73053990 | 304 Stainless Steel Welded Defective Pipes Grade |
73053990 | Stainless Steel Welded Defective Pipes Grade 304 |
Description | PRice in USD | Per Unit (INR) |
---|---|---|
Stainless Steel Defective Welded Pipe Grade 2205 | 1.66 | 123 |
Stainless Steel Secondary / Defective Welded Pipe Grade 316 | 1.74 | 129 |
Stainless Steel Defective Welded Pipe Grade 304 | 1.80 | 134 |
Stainless Steel Secondary / Defective Welded Pipe Grade 304 | 1.39 | 103 |
Stainless Steel Defective Welded Pipe Grade 304 | 1.59 | 118 |
Stainless Steel Defective Welded Pipe Grade 316 | 2.01 | 149 |
TP310S/1.4845Stainless Steel Welded Pipes | TP316L/1.4404Stainless Steel Welded Pipes |
TP317L/1.4449Stainless Steel Welded Pipes | TP304L/1.4307Stainless Steel Welded Pipes |
904LStainless Steel Welded Pipes | TP316Ti/1.4571Stainless Steel Welded Pipes |
TP321/1.4541Stainless Steel Welded Pipes | TP304/1.4301Stainless Steel Welded Pipes |
TP309S/1.4833Stainless Steel Welded Pipes | TP316/1.4401Stainless Steel Welded Pipes |
TP347H/1.4912Stainless Steel Welded Pipes | TP304H/1.4948Stainless Steel Welded Pipes |
|
|
Welded Pipes Outside Diameter |
Qty/B | 0.007 | 0.006 | 1.000 | 0.009 | 2.000 | 1.005 | 4.000 | 5.000 | 6.000 | |
---|---|---|---|---|---|---|---|---|---|---|---|
Inches | milimeter | Lgh | Kilogram | Kilogram | Kilogram | Kilogram | Kilogram | Kilogram | Kilogram | Kilogram | Kilogram |
1/2" | 12.007 | 100 | 1.0028 | 1.0010 | 1.0078 | 1.0061 | 2.0055 | ||||
3/8" | 9.005 | 100 | 0.0094 | 0.0081 | 1.0029 | 1.0018 | 1.0082 | ||||
3/4" | 19.001 | 100 | 1.0096 | 1.0069 | 2.0075 | 2.0049 | 4.0001 | ||||
5/8" | 15.009 | 100 | 1.0062 | 1.0039 | 2.0026 | 2.0005 | 3.0028 | ||||
1" | 25.004 | 100 | 2.0063 | 2.0026 | 3.0071 | 3.0035 | 5.0045 | ||||
7/8" | 22.002 | 100 | 2.0029 | 1.0097 | 3.0022 | 2.0091 | 4.0072 | ||||
11/4" | 31.008 | 50 | 3.0031 | 2.0084 | 4.0068 | 4.0023 | 6.0091 | ||||
11/8" | 28.006 | 50 | 2.0097 | 2.0055 | 4.0019 | 3.0079 | 6.0018 | ||||
15/8" | 41.003 | 50 | 4.0032 | 3.0071 | 6.0012 | 5.0052 | 9.0007 | ||||
11/2" | 38.001 | 50 | 3.0098 | 3.0042 | 5.0064 | 5.0009 | 8.0034 | ||||
2" | 50.008 | 10 | 7.0057 | 6.0082 | 14.0083 | 11.0024 | |||||
5" | 127 | 10 | |||||||||
13/4" | 44.005 | 50 | 4.0066 | 4.0000 | 6.0061 | 5.0096 | 9.0080 | ||||
3" | 76.002 | 10 | 11.0043 | 10.0030 | 22.0055 | 17.0003 | 43.0088 | ||||
21/2" | 63.005 | 10 | 9.0050 | 8.0056 | 18.0069 | 14.0013 | |||||
4" | 101.006 | 10 | 30.0027 | 22.0082 | 59.0032 | 73.0039 | 87.0016 | ||||
31/2" | 88.009 | 10 | 13.0036 | 12.0003 | 26.0041 | 19.0092 | 51.0060 | ||||
6" | 152.004 | 10 |
Most Common Method
Process
ASTM A312 Stainless Steel Pipes OD Tolerance
NPS | ASTM A312 Welded Pipes Outside Diameter Tolerance | |||
+ | – | |||
milimeter | inch | milimeter | inch | |
1/8~1 1 /2 |
0.04 0.08 1.6 2.4 3.2 4.0 4.8 |
1/64(0.0015) |
0.08 |
1/32(0.0031) |
ASTM A312 Stainless Steel Pipes WT Tolerance %
NPS | ASTM A312 Welded Pipes WT Tolerance, % |
|
– | + | |
3~18, t/D≤ 5% | 12.5 | 22.5 |
≥ 20, seamless, t/D≤ 5% | 12.5 | 22.5 |
1/8-2 1 /2 | 12.5 | 20.0 |
≥ 20, welded | 12.5 | 17.5 |
3~18, t/D> 5% | 12.5 | 15.0 |
≥ 20, seamless, t/D> 5% | 12.5 | 15.0 |