Titanium is a low density material, which means that it is ideally meant for applications that require lightweight components. One industry that makes use of the Titanium Socket Head Cap Screws is the aerospace industry. Since the vehicle has to gain momentum at a rapid pace, using lighter weighing Aerospace Titanium Fasteners aids it to achieve that. The density of the material is lower than that of stainless steel alloys.
Apart from being light in weight, the Titanium Bolts And Fasteners have tensile strength properties, almost like some high quality classes of carbon steel. The corrosion resistance properties of Titanium Aircraft Fasteners extend to media such as aqua regia, seawater, and chlorine. In the aerospace industry, the use of titanium nuts and bolts is considered important because the material exhibits good resistance to both fatigues, as well as cracking.
Some conventionally used pure metals and alloys have the tendency to creep when exposed to elevated temperatures. But because the Titanium Fasteners are able to withstand moderate strength, without being susceptible to creep, they prove to be useful across various industries. Due to its resistance to saline or brine solution or seawater, titanium fasteners manufacturers recommend the use of these fasteners in the marine engineering industry. The desalination plants or heat exchanger applications also use the Titanium 12 Point Bolts for heavy duty fastening.
before buy from india see Comparision of Titanium Fasteners price with Inconel fasteners price list
| Standard | IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards |
|---|---|
| Threads: | BSF, UNF METRIC, UNC, BSW or as required |
| Standard | ANSI – American National Standards Institute
DIN:DIN 933, DIN 931, DIN 970, DIN 934 UTS – Unified Thread Standard : UNF, NPT, NPTF, UNS, UNC, UNEF ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards |
| Fasteners/ Bolts Size | M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160 |
| Length | 3 mm to 200 mm |
| Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe etc |
| Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Finishing | Zinc white, (yellow, black, blue), black oxide,
Dacroment, Geometry, plated zinc-nickel, anodizing, nickel plated, Stainless steel: Passivated Self-Colour, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, Stainless Steel, some special one like DACROMET and Mechanically Applied coating |
| raw materials of Source | JSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc. |
| Form | Square, Hex, Threading as per Gauge, Round Etc. |
| Process of Production | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
| Surface Coating |
|
| Packing | IN BULK: pallet, canton, carton / Small Boxs / pallet or customer request |
| Description | Per Unit (INR) | Price in USD | Price in EURO |
|---|---|---|---|
| Titanium Gr7 Fasteners M10 (Allen Bolt +1 Nut+2 Washers) ( 50 Sets) | 30,655 | 415.91 | 344.03 |
| PARTS OF WATCHES: E20DSA.2: Folding clasp, push-piece fastening, 20mm, satin titanium, embossed wing | 11,898 | 161.43 | 133.53 |
| Titanium Fasteners,m3x0.5x8mm Long Allen Head Screw Po Isge20150320090101 | 150 | 2.04 | 1.68 |
| Titanium Fasteners,m3x0.5x12mm Long Allen Head Screw Po Isge20150320090101 | 193 | 2.62 | 2.17 |
| Parts Of Watches: E20dsa.2: Folding Clasp Push-piece Fastening 20mm Satin Titanium Embossed Wing | 14,117 | 191.53 | 158.43 |
| Parts Of Watches: E20dsa.2:folding Clasp Push-piece Fastening 20mm Satin Titanium Embossed Wing | 14,117 | 191.53 | 158.43 |
| Titanium Fasteners Din 933/934 Gr.2-m12 X 75 Bolt & Nut (200pcs) | 5,852 | 79.40 | 65.67 |
| Titanium Fasteners Din 933/934 Gr.2-m16 X 75 Bolt & Nut(200pcs) | 5,856 | 79.45 | 65.72 |
| Titanium Fasten (Exhibition Purpose) | 1,304 | 17.69 | 14.63 |
| Titanium Fasteners (Alloy Ti-6a1-4v) M3x0.5x7mm Po Isge20130282150101 | 178 | 2.42 | 2.00 |
| Titanium Fasteners (Alloy Ti-6a1-4v) M5x0.8x14mmpo Isge20130282150101 | 188 | 2.55 | 2.11 |
| Titanium Fasteners (Allloy Ti-6ai-4v) M3x0.5x4mm Po Isge20130282150101 | 175 | 2.37 | 1.96 |
| HS Code | Description |
|---|---|
| 84213990 | 01-f-066 Es212 Grp In Derakane 411 Ptfe Gasket Included, Titanium Fasteners Included, Export Sea Crafting Included |
| 81089090 | Titanium Gr7 Fasteners M10 (Allen Bolt +1 Nut+2 Washers) ( 50 Sets) |
| 91139090 | Parts Of Watches: E20dsa.2: Folding Clasp, Push-piece Fastening, 20mm, Satin Titanium, Embossed Wing |
| 81089090 | Titanium Fasteners,m3x0.5x8mm Long Allen Head Screw Po Isge20150320090101 |
| 81089090 | Titanium Fasteners,m3x0.5x12mm Long Allen Head Screw Po Isge20150320090101 |
| 91139090 | Parts Of Watches: E20dsa.2: Folding Clasp Push-piece Fastening 20mm Satin Titanium Embossed Wing |
| 91139090 | Parts Of Watches: E20dsa.2:folding Clasp Push-piece Fastening 20mm Satin Titanium Embossed Wing |
| 81089090 | Titanium Fasteners Din 933/934 Gr.2-m12 X 75 Bolt & Nut (200pcs) |
| 81089090 | Titanium Fasteners Din 933/934 Gr.2-m16 X 75 Bolt & Nut(200pcs) |
| 81089090 | Titanium Fasten (Exhibition Purpose) |
| 81089090 | Titanium Fasteners (Alloy Ti-6a1-4v) M3x0.5x7mm Po Isge20130282150101 |
| 81089090 | Titanium Fasteners (Alloy Ti-6a1-4v) M5x0.8x14mmpo Isge20130282150101 |
| 81089090 | Titanium Fasteners (Allloy Ti-6ai-4v) M3x0.5x4mm Po Isge20130282150101 |
So titanium (6al4v) should be some 45% more grounded than steel, and near, if not impenetrable to consumption. In the event that I have the alternative to redesign my steel equipment (screws, deadlocks, turn, cut) from steel to titanium, would it have ANY genuine effect as far as solidness? On the off chance that titanium is lighter than steel, i'd envision when individuals state it's "more grounded", they mean in case you're contrasting state 1lb of titanium with 1lb of steel. However, a similar size of titanium screws would be expected to supplant the steel ones, so they wouldnt gauge the equivalent. In the event that titanium is just more grounded by precise weight, I'd envision you would require bigger titanium screws, stalemates, and so on to adjust in weight, and really make a distinction or advantage in strength.
Hexagon Bolts / Set Screws |
Stud Bolts |
Hexagon Nuts |
Socket Cap screws |
|---|---|---|---|
DIN 931 |
BS4882 |
DIN 934 |
DIN 912 |
DIN 933 |
DIN 976 |
BS 1768 |
DIN 6912 |
BS 1768 |
BS 1769 |
DIN 7984 |
|
UNI 5731 |
BS 1083 |
ANSI B18.3 |
|
UNI 5739 |
BS 3692 |
ISO 4762 |
|
ISO 4014 |
ISO 4032 |
UNI 5931 |
|
ISO 4017 |
ISO 4033 |
BS 2470 |
|
BS 1769 |
ANSI B18.2.2 |
BS 4168 |
|
BS 3692 |
|||
ANSI B18.2.1 |
Socket & Slotted Set Screws |
Socket & Slotted Countersunk Screws |
Studs |
Washers |
|---|---|---|---|
DIN 913 |
DIN 963 |
DIN 938 |
DIN 125 |
DIN 914 |
DIN 7991 |
DIN 939 |
DIN 9021 |
DIN 915 |
BS 4168 |
DIN 2510 |
BS 4320 |
DIN 916 |
BS 1981 |
BS 4439 |
BS 3410 |
DIN 551 |
BS 483 |
BS 2693 |
|
DIN 553 |
BS 2470 |
Spring Washers |
|
DIN 438 |
DIN 127 |
||
BS 4168 |
BS 4464 |
||
BS 1802 |
| Nominal Size, inch. | Coarse Threads - UNC | Fine Threads - UNF | 8 Thread Series - 8UN | |||
|---|---|---|---|---|---|---|
| Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | |
| 1/4 | 20 | 0.0318 | 28 | 0.0364 | -- | -- |
| 5/16 | 18 | 0.0524 | 24 | 0.0580 | -- | -- |
| 3/18 | 16 | 0.0775 | 24 | 0.0878 | -- | -- |
| 7/16 | 14 | 0.1063 | 20 | 0.1187 | ||
| 1/2 | 13 | 0.1419 | 20 | 0.1599 | ||
| 9/16 | 12 | 0.1820 | 18 | 0.2030 | ||
| 5/8 | 11 | 0.2260 | 18 | 0.2560 | ||
| 3/4 | 10 | 0.3340 | 16 | 0.3730 | ||
| 7/8 | 9 | 0.4620 | 14 | 0.5090 | ||
| 1 | 8 | 0.6060 | 12 | 0.6630 | ||
| 1 1/8 | 7 | 0.7630 | 12 | 0.8560 | 8 | 0.790 |
| 1 1/4 | 7 | 0.9690 | 12 | 1.0730 | 8 | 1.000 |
| 1 3/8 | 6 | 1.1550 | 12 | 1.3150 | 8 | 1.233 |
| 1 1/2 | 6 | 1.4050 | 12 | 1.5810 | 8 | 1.49 |
APPROX. WEIGHT IN KGS FOR 100 NOS |
|||||||||||
| SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
| MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
| FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
| M-3 | 0.01 | 0.01 | |||||||||
| M-4 | 0.02 | 0.02 | |||||||||
| M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
| M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
| M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
| M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
| M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
| M-14 | 0.82 | 0.60 | 0.38 | ||||||||
| M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
| M-18 | 1.27 | 0.97 | 0.66 | ||||||||
| M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
| M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
| M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
| M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
| M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
| M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
| M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
| M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
| M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
| M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
| M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
| M-52 | 31.90 | 33.00 | 18.20 | ||||||||
| M-56 | 47.90 | 19.30 | |||||||||
| M-60 | 51.60 | 20.30 | |||||||||
| M-64 | 55.40 | 21.80 | |||||||||
| M-68 | 57.40 | ||||||||||
| M-72 | 63.40 | 24.00 | |||||||||
Titanium Bolt Coatings |
|||||
Mirror Buffed |
Hot Dipped Galvanizing |
Epoxy Coating |
Electro Polished |
Passivation |
|
Teflon Coating |
Oxidized |
Zinc Plating |
Chrome Plating |
||
MM THREADS AS PER IS 1363/67 |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
APPROXIMATE WEIGHT IN KGS FOR 100 NOS |
||||||||||
LENGTH |
D I A M E T E R |
|||||||||
M 5 |
M 6 |
M 8 |
M 10 |
M 12 |
M 14 |
M 16 |
M 18 |
M 20 |
M 22 |
|
| 16 mm | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
| 20 mm | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
| 25 mm | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
| 30 mm | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
| 35 mm | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
| 40 mm | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
| 45 mm | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
| 50 mm | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
| 55 mm | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
| 60 mm | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
| 65 mm | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
| 70 mm | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
| 75 mm | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
| 80 mm | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
| 90 mm | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
| 100 mm | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
| 110 mm | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
| 120 mm | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
| 130 mm | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
| 140 mm | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
| 150 mm | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
| 160 mm | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
| 170 mm | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
| 180 mm | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
| 190 mm | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
| 200 mm | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
| 220 mm | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
| 240 mm | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
| 250 mm | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
| 260 mm | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
| 280 mm | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
| 300 mm | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
| 320 mm | 31.646 | 56.818 | 92.593 | |||||||
| 340 mm | 33.557 | 60.241 | 98.039 | |||||||
| 360 mm | 35.211 | 63.291 | 104.167 | |||||||
| 380 mm | 37.037 | 66.667 | 108.696 | |||||||
| 400 mm | 39.063 | 69.444 | 113.636 | |||||||
| Size | USS | SAE | ||||
|---|---|---|---|---|---|---|
| Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
|
| #2 | 3/32" | 1/4" | 0.020" | |||
| #4 | 1/8" | 5/16" | 0.032" | |||
| #6 | 5/32" | 3/8" | 0.049" | |||
| #8 | 3/16" | 7/16" | 0.049" | |||
| #10 | 7/32" | 1/2" | 0.049" | |||
| #12 | 1/4" | 9/16" | 0.065" | |||
| 1/4" | 5/16" | 0.734" | 0.065" | 9/32" | 5/8" | 0.065" |
| 5/16" | 3/8" | 7/8" | 0.083" | 11/32" | 11/16" | 0.065" |
| 3/8" | 7/16" | 1" | 0.083" | 13/32" | 13/16" | 0.065" |
| 7/16" | 1/2" | 1-1/4" | 0.083" | 15/32" | 15/16" | 0.065" |
| 1/2" | 9/16" | 1-3/8" | 0.109" | 17/32" | 1-1/16" | 0.095" |
| 9/16" | 5/8" | 1-15/32" | 0.109" | 19/32" | 1-5/32" | 0.095" |
| 5/8" | 11/16" | 1-3/4" | 0.134" | 21/32" | 1-5/16" | 0.095" |
| 3/4" | 13/16" | 2" | 0.148" | 13/16" | 1-15/32" | 0.134" |
| 7/8" | 15/16" | 2-1/4" | 0.165" | 15/16" | 1-3/4" | 0.134" |
| 1" | 1-1/16" | 2-1/2" | 0.165" | 1-1/16" | 2" | 0.134" |
| 1-1/8" | 1-1/4" | 2-3/4" | 0.165" | |||
| 1-1/4" | 1-3/8" | 3" | 0.165" | |||
| 1-3/8" | 1-1/2" | 3-1/4" | 0.180" | |||
| 1-1/2" | 1-5/8" | 3-1/2" | 0.180" | |||
| 1-5/8" | 1-3/4" | 3-3/4" | 0.180" | |||
| 1-3/4" | 1-7/8" | 4" | 0.180" | |||
| 2" | 2-1/8" | 4-1/2" | 0.213" | |||
| Torque Specifications | |||||||
|---|---|---|---|---|---|---|---|
|
Bolt Size
Inches or # |
Threads
Per Inch |
Standard Dry Torque in Inch-Pounds
|
|||||
|
#2
|
56
|
2.5
|
2.6
|
||||
|
64
|
3.0
|
3.2
|
|||||
|
#3
|
48
|
3.9
|
4.0
|
||||
|
56
|
4.4
|
4.6
|
|||||
|
#4
|
40
|
5.2
|
5.5
|
||||
|
48
|
6.6
|
6.9
|
|||||
|
#5
|
40
|
7.7
|
8.1
|
||||
|
44
|
9.4
|
9.8
|
|||||
|
#6
|
32
|
9.6
|
10.1
|
||||
|
40
|
12.1
|
12.7
|
|||||
|
#8
|
32
|
19.8
|
20.7
|
||||
|
36
|
22.0
|
23.0
|
|||||
|
#10
|
24
|
22.8
|
23.8
|
||||
|
32
|
31.7
|
33.1
|
|||||
|
Bolt Size
Inches or # |
Threads
Per Inch |
Standard Dry Torque in Inch-Pounds
|
|||||
|
1/4
|
20
|
75.2
|
78.8
|
||||
|
28
|
94.0
|
99.0
|
|||||
|
5/16
|
18
|
132
|
138
|
||||
|
24
|
142
|
147
|
|||||
|
3/8
|
16
|
236
|
247
|
||||
|
24
|
259
|
271
|
|||||
|
7/16
|
14
|
376
|
393
|
||||
|
20
|
400
|
418
|
|||||
|
1/2
|
13
|
517
|
542
|
||||
|
20
|
541
|
565
|
|||||
|
Bolt Size
Inches or # |
Threads
Per Inch |
Standard Dry Torque in Inch-Pounds
|
|||||
|
9/16
|
12
|
682
|
713
|
||||
|
18
|
752
|
787
|
|||||
|
5/8
|
11
|
1110
|
1160
|
||||
|
18
|
1244
|
1301
|
|||||
|
3/4
|
10
|
1530
|
1582
|
||||
|
16
|
1490
|
1558
|
|||||
|
7/8
|
9
|
2328
|
2430
|
||||
|
14
|
2318
|
2420
|
|||||
|
1
|
8
|
3440
|
3595
|
||||
|
14
|
3110
|
3250
|
|||||
|
Bolt Size
Inches or # |
Threads
Per Inch |
Standard Dry Torque in Foot-Pounds
|
|||||
|
1 1/8
|
7
|
413
|
432
|
||||
|
12
|
390
|
408
|
|||||
|
1 1/4
|
7
|
523
|
546
|
||||
|
12
|
480
|
504
|
|||||
|
1 1/2
|
6
|
888
|
930
|
||||
|
12
|
703
|
732
|
|||||
|
Nominal Size or Basic Major Thread Diameter
|
F
|
G
|
H
|
||||||
|
Width
Across Flats |
Width
Across Corners |
Thickness
|
|||||||
|
Basic
|
Max
|
Min
|
Max
|
Min
|
Basic
|
Max
|
Min
|
||
|
1/4
|
.2500
|
7/16
|
.438
|
.428
|
.505
|
.488
|
7/32
|
.226
|
.212
|
|
5/16
|
.3125
|
1/2
|
.500
|
.489
|
.577
|
.557
|
17/64
|
.273
|
.258
|
|
3/8
|
.3750
|
9/16
|
.562
|
.551
|
.650
|
.628
|
21/64
|
.337
|
.479
|
|
7/16
|
.4375
|
11/16
|
.688
|
.675
|
.794
|
.768
|
3/8
|
.385
|
.365
|
|
1/2
|
.5000
|
3/4
|
.750
|
.736
|
.866
|
.840
|
7/16
|
.448
|
.427
|
|
9/16
|
.5625
|
7/8
|
.875
|
.861
|
1.010
|
.982
|
31/64
|
.496
|
.473
|
|
5/8
|
.6250
|
15/16
|
.938
|
.922
|
1.083
|
1.051
|
35/64
|
.559
|
.535
|
|
3/4
|
.7500
|
1-1/8
|
1.125
|
1.088
|
1.299
|
1.240
|
41/64
|
.665
|
.617
|
|
7/8
|
.8750
|
1-5/16
|
1.312
|
1.269
|
1.516
|
1.447
|
3/4
|
.776
|
.724
|
|
1
|
1.0000
|
1-1/2
|
1.500
|
1.450
|
1.732
|
1.653
|
55/64
|
.887
|
.831
|
|
1-1/8
|
1.1250
|
1-11/16
|
1.688
|
1.631
|
1.949
|
1.859
|
31/32
|
.999
|
.939
|
|
1-3/8
|
1.3750
|
2-1/16
|
2.062
|
1.994
|
2.382
|
2.273
|
1-11/64
|
1.206
|
1.138
|
|
1-1/2
|
1.500
|
2-1/4
|
2.250
|
2.175
|
2.598
|
2.480
|
1-9/32
|
1.ASTM A194 GR. 8
|
1.245
|
|
1-5/8
|
1.6250
|
2-7/16
|
2.438
|
2.356
|
2.815
|
2.686
|
1-25/64
|
1.429
|
1.353
|
|
1-3/4
|
1.7500
|
2-5/8
|
2.625
|
2.538
|
3.031
|
2.893
|
1-1/2
|
1.540
|
1.460
|
|
2
|
2.0000
|
3
|
3.000
|
2.900
|
3.464
|
3.306
|
1-23/32
|
1.763
|
1.675
|
|
2-1/4
|
2.2500
|
3-3/8
|
3.375
|
3.263
|
3.897
|
3.719
|
1-15/16
|
1.986
|
1.890
|
|
2-1/2
|
2.5000
|
3-3/4
|
3.750
|
3.625
|
4.330
|
4.133
|
2-5/32
|
2.209
|
2.105
|
|
2-3/4
|
2.7500
|
4-1/8
|
4.125
|
3.988
|
4.763
|
4.546
|
2-3/8
|
2.431
|
2.319
|
|
Nominal Size or Basic Major Thread Diameter
|
F
|
G
|
H
|
||||||
|
Width Across Flats
|
Width Across Corners
|
Thickness
|
|||||||
|
Basic
|
Max
|
Min
|
Max
|
Min
|
Basic
|
Max
|
Min
|
||
|
1/4
|
.2500
|
1/2
|
.500
|
.488
|
.577
|
.556
|
15/64
|
.250
|
.218
|
|
5/16
|
.3125
|
9/16
|
.562
|
.546
|
.650
|
.622
|
19/64
|
.314
|
.280
|
|
3/8
|
.3750
|
11/16
|
.688
|
.669
|
.794
|
.763
|
23/64
|
.377
|
.341
|
|
7/16
|
.4375
|
3/4
|
.750
|
.728
|
.866
|
.830
|
27/64
|
.441
|
.403
|
|
1/2
|
.5000
|
7/8
|
.875
|
.850
|
1.010
|
.969
|
31/64
|
.504
|
.464
|
|
9/16
|
.5625
|
15/16
|
.938
|
.909
|
1.083
|
1.037
|
35/64
|
.568
|
.526
|
|
5/8
|
.6250
|
1-1/16
|
1.062
|
1.031
|
1.227
|
1.175
|
39/64
|
.631
|
.587
|
|
3/4
|
.7500
|
1-1/4
|
1.250
|
1.212
|
1.443
|
1.382
|
47/64
|
.758
|
.710
|
|
7/8
|
.8750
|
1-7/16
|
1.438
|
1.394
|
1.660
|
1.589
|
55/64
|
.885
|
.833
|
|
1
|
1.0000
|
1-5/8
|
1.325
|
1.575
|
1.876
|
1.796
|
63/64
|
1.012
|
.956
|
|
1-1/8
|
1.1250
|
1-13/16
|
1.812
|
1.756
|
2.093
|
2.002
|
1-7/64
|
1.139
|
1.079
|
|
1-1/4
|
1.2500
|
2
|
2.000
|
1.938
|
2.309
|
2.209
|
1-7/32
|
1.251
|
1.187
|
|
1-3/8
|
1.3750
|
2-3/16
|
2.188
|
2.119
|
2.526
|
2.416
|
1-11/32
|
1.378
|
1.460
|
|
1-1/2
|
1.5000
|
2-3/8
|
2.375
|
2.300
|
2.742
|
2.622
|
1-15/32
|
1.505
|
1.433
|
|
1-5/8
|
1.6250
|
2-9/16
|
2.562
|
2.481
|
2.959
|
2.828
|
1-19/32
|
1.632
|
1.556
|
|
1-3/4
|
1.7500
|
2-3/4
|
2.750
|
2.662
|
3.175
|
3.035
|
1-23/32
|
1.759
|
1.679
|
|
2
|
2.0000
|
3-1/8
|
3.125
|
3.025
|
3.608
|
3.449
|
1-31/32
|
2.013
|
1.925
|
|
2-1/4
|
2.2500
|
3-1/2
|
3.500
|
3.388
|
4.041
|
3.862
|
2-13/64
|
2.251
|
2.155
|
|
2-1/2
|
2.5000
|
3-7/8
|
3.875
|
3.750
|
4.474
|
4.275
|
2-29/64
|
2.505
|
2.401
|
|
2-3/4
|
2.7500
|
4-1/4
|
4.250
|
4.112
|
4.907
|
4.688
|
2-45/64
|
2.759
|
2.647
|
|
3
|
3.0000
|
4-5/8
|
4.625
|
4.475
|
5.340
|
5.102
|
2-61/64
|
3.013
|
2.893
|
|
3-1/4
|
3.2500
|
5
|
5.000
|
4.838
|
5.774
|
5.515
|
3-3/16
|
3.252
|
3.124
|
|
3-1/2
|
3.5000
|
5-3/8
|
5.375
|
5.200
|
6.207
|
5.928
|
3-7/16
|
3.506
|
3.370
|
|
3-3/4
|
3.7500
|
5-3/4
|
5.750
|
5.562
|
6.640
|
6.341
|
3-11/16
|
3.670
|
3.616
|
|
4
|
4.0000
|
6-1/8
|
6.125
|
5.925
|
7.073
|
6.755
|
3-15/16
|
4.014
|
3.862
|
|
Wood Screws: Slotted & Phillips Flat Head Dimensions (ASME B18.6.1)
|
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal Size* |
Phillips Driver Size |
Head Diameter (A)
|
Head Height (H)
|
Width of Slot (J)
|
Depth of Slot (T)
|
Dimension of Recess
|
|||||||
|
Max
|
Min
|
Ref
|
Max
|
Min
|
Max
|
Min
|
Dia. Max (M)
|
Dia. Min (M)
|
Depth Max (G)
|
Depth Min (G)
|
Width Min (N)
|
||
|
2
|
1
|
.172
|
.147
|
.051
|
.031
|
.023
|
.023
|
.015
|
.102
|
.089
|
.063
|
.047
|
.017
|
|
3
|
1
|
.199
|
.141
|
.059
|
.035
|
.027
|
.027
|
.017
|
.107
|
.094
|
.068
|
.052
|
.018
|
|
4
|
1
|
.225
|
.195
|
.067
|
.039
|
.031
|
.030
|
.020
|
.128
|
.115
|
.089
|
.073
|
.018
|
|
5
|
2
|
.252
|
.220
|
.075
|
.043
|
.035
|
.034
|
.022
|
.154
|
.141
|
.086
|
.063
|
.027
|
|
6
|
2
|
.279
|
.244
|
.083
|
.048
|
.039
|
.038
|
.024
|
.174
|
.161
|
.106
|
.083
|
.029
|
|
7
|
2
|
.305
|
.268
|
.091
|
.048
|
.039
|
.041
|
.027
|
.189
|
.176
|
.121
|
.098
|
.030
|
|
8
|
2
|
.332
|
.292
|
.100
|
.054
|
.045
|
.045
|
.029
|
.204
|
.191
|
.136
|
.113
|
.032
|
|
9
|
2
|
.358
|
.316
|
.108
|
.054
|
.045
|
.049
|
.032
|
.214
|
.201
|
.146
|
.123
|
.033
|
|
10
|
3
|
.385
|
.340
|
.116
|
.060
|
.050
|
.053
|
.034
|
.258
|
.245
|
.146
|
.123
|
.034
|
|
12
|
3
|
.438
|
.389
|
.132
|
.067
|
.056
|
.060
|
.039
|
.283
|
.270
|
.171
|
.148
|
.036
|
|
14
|
3
|
.507
|
.452
|
.153
|
.075
|
.064
|
.070
|
.046
|
.283
|
.270
|
.171
|
.148
|
.036
|
|
16
|
3
|
.544
|
.485
|
.164
|
.075
|
.064
|
.075
|
.049
|
.303
|
.290
|
.191
|
.168
|
.039
|
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNESS | ACROSS THE FLATS | ACROSS BOLTS CORNERS | ||||
|---|---|---|---|---|---|---|---|---|
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
|
Nominal
|
Thread.
|
Hex Socket Size
|
Body diameter and Head height
|
Head Dia
|
Soc. length
|
||
|
Size
|
Pitch
|
Max
|
Min
|
Max
|
Min
|
||
|
J
|
D /H
|
A
|
K
|
||||
|
M3
|
0.5
|
2.50
|
3.00
|
2.86
|
5.50
|
5.20
|
1.3
|
|
M4
|
0.70
|
3.00
|
4.00
|
3.82
|
7.00
|
6.64
|
2.00
|
|
M5
|
0.8
|
4.00
|
5.00
|
4.82
|
8.50
|
8.14
|
2.70
|
|
M6
|
1.0
|
5.00
|
6.00
|
5.82
|
10.00
|
9.64
|
3.30
|
|
M8
|
1.25
|
6.00
|
8.00
|
7.78
|
13.00
|
12.57
|
4.3
|
|
M10
|
1.5
|
8.00
|
10.00
|
9.78
|
16.00
|
15.57
|
5.50
|
|
M12
|
1.75
|
10.00
|
12.00
|
11.73
|
18.00
|
17.57
|
6.60
|
|
M16
|
2.0
|
14.00
|
16.00
|
15.73
|
24.00
|
23.48
|
8.80
|
|
M20
|
2.5
|
17.00
|
20.00
|
19.67
|
30.00
|
29.48
|
10.70
|
|
M24
|
3.0
|
19.00
|
24.00
|
23.67
|
36.00
|
35.38
|
12.90
|
|
Nominal size
|
Body Dia
|
Thread Pitch
|
Hex Socket Size
|
Max Cone Dia
|
Head Dia
|
Head Height
|
Soc. length
|
||
|
|
D(max)
|
D(min)
|
|
J
|
A1
|
A_max
|
A_Min
|
H
|
K
|
|
M3
|
3.00
|
2.86
|
0.5
|
2,0
|
6,72
|
6,00
|
5,82
|
1,86
|
1,05
|
|
M4
|
4.00
|
3.82
|
0.70
|
2,5
|
8,96
|
8,00
|
7,78
|
2,48
|
1,49
|
|
M5
|
5.00
|
4.82
|
0.8
|
3,0
|
11,2
|
10,00
|
9,78
|
3,1
|
1,86
|
|
M6
|
6.00
|
5.82
|
1.0
|
4,0
|
13,44
|
12,00
|
11,75
|
3,72
|
2,16
|
|
M8
|
8.00
|
7.78
|
1.25
|
5,0
|
17,92
|
16,00
|
15,73
|
4,96
|
2,85
|
|
M10
|
10.00
|
9.78
|
1.5
|
6,0
|
22,4
|
20,00
|
19,67
|
6,2
|
3,60
|
|
M12
|
12.00
|
11.73
|
1.75
|
8,0
|
26,88
|
24,00
|
23,67
|
7,44
|
4,35
|
|
M16
|
16.00
|
15.73
|
2.0
|
10,0
|
33,6
|
32,00
|
29,67
|
8,8
|
4,89
|
|
M20
|
20.00
|
19.67
|
2.5
|
10,0
|
40,32
|
40,00
|
35,61
|
10,16
|
5,49
|
|
Nut Size
(mm) |
Diameter*
(mm) |
Height
(mm) |
||
|---|---|---|---|---|
|
Hex Nut
|
Jam Nut
|
Nylock Nut
|
||
|
2
|
4
|
1.6
|
1.2
|
-
|
|
2.5
|
5
|
2
|
1.6
|
-
|
|
3
|
5.5
|
2.4
|
1.8
|
4
|
|
4
|
7
|
3.2
|
2.2
|
5
|
|
5
|
8
|
4
|
2.7
|
5
|
|
6
|
10
|
5
|
3.2
|
6
|
|
7
|
11
|
5.5
|
3.5
|
-
|
|
8
|
13
|
6.5
|
4
|
8
|
|
10
|
17
|
8
|
5
|
10
|
|
12
|
19
|
10
|
6
|
12
|
|
14
|
22
|
11
|
7
|
14
|
|
16
|
24
|
13
|
8
|
16
|
|
18
|
27
|
15
|
9
|
18.5
|
|
20
|
30
|
16
|
10
|
20
|
|
* This is the diameter across the flats. It is also the size of wrench to use.
|
||||
Titanium Acorn Nuts |
Titanium Dome Nuts |
Titanium Self Tapping Screws |
Titanium Lug Nuts |
Titanium Grub Screws |
Titanium Hex Head Screws |
Metric Titanium Bolts |
Titanium Flange Nuts |
Titanium Allen Bolts |
Titanium Allen Head Bolts |
ASTM B348 Titanium Tie Bar |
B348 Ti Threaded Rod |
Titanium Screws |
Titanium Set Screws |
Titanium Bolts Harley |
Thomson Titanium Bolts |
Titanium Crank Bolts |
Titanium M6 Bolts |
