Raaj Sagar Steels

Titanium Tube Manufacturer In India

Ti Alloy Seamless & welded Tubing Suppliers In Mumbai as per Astm B338

Titanium tube

 

offer Ti Alloy Square/Gas/Exhaust/Ncf tubo with certification & types like cold drawn tube, annealed tube, coiled tubing, Seam welded tube.

Tubes and pipes are generally produced by the use of various specifications. A specification is a means of directions for the buyer, supplier as well as titanium tube manufacturers in India. They offer insights as to the selection of the material, technique for construction, that is - seamless or welded, in addition to other pointers with regards to the mechanical properties of the Titanium Tube. For instance, the use of specification ASTM B338 for the production of these pipes takes into consideration 28 different types of titanium alloys.

The ASTM B338 Titanium Alloy Seamless Tubing may be used in applications involving surface condensers, evaporators, or even heat exchangers. The construction of a seamless variety 1.375 id titanium tube calls for its manufacture via a hollow billet. The process may be the use of a cold reducing or cold drawing process such that the 1.5 od titanium tube meets the prescribed value of the specification. Cold drawing processes impart several properties to the titanium square tube because they have an improved surface, they are straighter, and they have better mechanical properties.

On the other hand, a welded construction of the titanium exhaust tube is done via an arc-welding process. This arc-welding process is an automatic one from a flat rolled product. Arc welding the Ti Alloy ERW Tube offers numerous advantages including cost efficiency and ease in welding. Since this welding technique does not use gas, the equipment to weld the Ti Welded Tubes is much lesser. Additionally, a shielding gas isn’t required to weld the 35mm titanium tube. This means that the welding process could be carried out on theTitanium NCF Tubes during wind or rain.

 

Compare Titanium Tube price with Hastelloy tube price list

 

Table Of Content:

 

Titanium Tube Specification Chart

Standard

ASTM, AISI, GB, JIS, customers' requests available

Size

Round Tube: OD: 16-119mm or customized

Thickness

0.25mm-3.0mm

Length

6m or according to customers' request

Sample

Free sample is available, but freight should be paid by you

Tolerance

Outer diameter: ±0.2mm

Thickness: ±0.05mm

Length: ±0.5mm

Ends

In plain end or bevelled ends or as your requirements

Welding Line Type

ERW (Electrical Resistance Weld)

Finishing

A. Sanded

B. Gloss #400,Mirror #600 - #1000

C. Brushed

D. Wood Grain

E. Embossed, Threaded

Application

Decorations, constructions, food industry, etc.

Certification

ISO, SGS

Round Pipe Size

16, 17, 18, 19, 20, 21, 22, 23, 25, 28, 31.8, 35, 36, 38.1, 48, 50.8, 60, 63.5, 76.2, 89, 101, 114 mm

Square Pipe Size

17, 18, 19, 20, 21, 22, 23, 24, 25, 28, 30, 36, 38, 50 mm

Rectangle Pipe Size

10*30, 10*40, 10*50, 20*10, 23*11, 24*12, 25*13, 28*25, 28*13, 29*14, 30*15, 30*20, 30*22, 34*22, 36*23, 50*25, 60*30, 75*45, 95*45 mm

Thickness

exact 0.25, 0.28, 0.32, 0.37, 0.41, 0.51, 0.61, 0.71, 0.91, 1.11, 1.15, 1.41 mm

Length

6m or according to customer’s request

Outer diameter

6.35-219mm

Tolerance

Outer diameter :±0.2mm

Thickness :±0.02mm

Length :±0.5mm

Process method

Code drawn, annealed with nitrogen protection, ultrasonic, automatic shape, polished

Test

Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector

Equipment

Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc

Origin

West Europe / Japanese / Indian / USA / Korean / American / European

Test Certificates

Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report

 

Titanium Tube Suppliers In India, Know more about Titanium Alloy Seamless Tubing Dimensions, Weight Chart and Price List in India

 

Titanium Tube Price In India
Description Per Unit (INR) Price in USD Price in EURO
Titanium Seamless Tube Astm B338 Gr2 Od 31.75 X Width 1.0x Length 6000mm (1000 Pcs) 1,160 15.75 13.00
Titanium Seamless Tubes, Asme Sb338, Grade 2, Annealed (Size: 25.4 Od X Wt(Avg.) 0.9 Mm Thk X L6000mm (2 Pcs.) 1,590 21.58 17.82
Titanium Seamless Tubes, Asme Sb338, Grade 2, Annealed (Size: 25.4 Od X Wt(Avg.) 0.9 Mm Thk X L6000mm (753 Pcs.) 1,590 21.58 17.82
Titanium Seamless Tubes Gr.2 (Od 25.4mm Xthk 1.2mm X 5005mm)qty:210 Pcs 1,570 21.31 17.59
Seamless Cold Finished Tubes Of Titanium Alloy Pt-7m According To Gost 22897-86 (As Per Inv) 18,25*2,5*3000 Pt-7m/iit-7m 15,621 212.05 175.05
Titanium Seamless Tubes, Asme Sb338, Grade 2, (Size: 25.4 Od X 0.9 Mm Thk X 6 Mtrl ) (128 Nos.) 1,426 19.36 15.98
Titanium Corrugated Tube Coil 22*0.6mm*5.5m (Parts For Dehumidifier Systems) 4,946 67.14 55.42
Tubes Sb 338 Grade 2 25.4mm Od X 1 Mm (Ave) X 9,500mml [welded Titanium Tube] [1969 Pcs] 1,254 17.02 14.05
Titanium Welded Tube Size:60.3 Od X 1.6 Th (Aw) X 3150 Mml (1792 Pcs) 1,461 19.83 16.37
Central Support For Tube 30 X 8 -titanium For Fittings 272 3.69 3.05
Rectangular Tube For Wardrobe With Rubber Gasket L= 3 Mt -titanium For Fittings 1,283 17.42 14.38
Left Support For Tube 30 X 8 -titanium For Fittings 272 3.69 3.05

 

Stock List of ASTM B338 Titanium Tube
Shapeform Outside Diameter Wall Thickness
TitaniumTubes & Tubing 1/4 inches6.35 mm 0.035 inches0.8890 mm
0.313 inches7.9502 mm 0.035 inches0.8890 mm
3/8 inches9.525 mm 0.035 inches0.8890 mm
1/2 inches12.70 mm 0.035 inches0.8890 mm
5/8 inches15.875 mm 0.035 inches0.8890 mm
3/4 inches19.05 mm 0.035 inches0.8890 mm
1 inches25.40 mm 0.035 inches0.8890 mm
1 1/4 inches31.75 mm 0.035 inches0.8890 mm
1 1/2 inches38.10 mm 0.035 inches0.8890 mm
2 inches50.80 mm 0.035 inches0.8890 mm
2.500 inches63.5 mm 0.035 inches0.8890 mm
3 inches76.20 mm 0.035 inches0.8890 mm
3 1/2 inches88.90 mm 0.035 inches0.8890 mm
4 inches101.6 mm 0.035 inches0.8890 mm
4.500 inches114.3 mm 0.035 inches0.8890 mm
5.000 inches127 mm 0.035 inches0.8890 mm
5.500 inches139.7 mm 0.035 inches0.8890 mm
6.000 inches152.4 mm 0.035 inches0.8890 mm
6.500 inches165.1 mm 0.035 inches0.8890 mm
7.000 inches177.8 mm 0.035 inches0.8890 mm
7.500 inches190.5 mm 0.035 inches0.8890 mm
8.000 inches203.2 mm 0.035 inches0.8890 mm
8.500 inches215.9 mm 0.035 inches0.8890 mm
9.000 inches228.6 mm 0.035 inches0.8890 mm
1/4 inches6.35 mm 0.059 inches1.4986 mm

 

Ti alloy Tubing Packaging
titanium tube packaging
ti alloy tubes packaging

 

Hs Code of Titanium Alloy Tube
HS Code Description
83024200 Right Support For Tube 30 X 8 -titanium For Fittings
81089010 Seamless Ti Tube,annealed Astm B338 Gr.2 (150 Pcs) (Titanium Tube) (16od X 1.2thk,min X 6meters)
81089010 Seamless Ti Tube,annealed Astm B338 Gr.2 (120 Pcs) (Titanium Tube) (19.05od X 1.2thk,min X 6meters)
81089010 Ti Plate Gr.2 (1 Pcs) (Titanium Tube) (2000 X 1000 X 14mm)(Plate)
81089090 8 Nos. Of Ti Tube --titanium Tube For Rare Gas Purifier
81089090 Titanium Seamless Tube. Acc.to Astm B861 Gr.1 Size Od25.4x1.0awx3000mm (250 Pcs, 750 M)
81089090 Titanium Tube, Grade 2, Size:od 19 X 0.9mm X6000mm

 

1.375 id titanium tube available according to international standards and specifications

 

Types of ASTM B338 Titanium Tube
ASTM B338 Titanium Exhaust Tubing

ASTM B338 Titanium Exhaust Tubing

Titanium Alloy Square Tube

Titanium Alloy Square Tube

Titanium Seamless Tube

Titanium Seamless Tube

Titanium NCF Rectangular Tubing

Titanium NCF Rectangular Tubing

Titanium Furnace Tube

Titanium Furnace Tube

B338 Titanium Alloy Radiant Tube

B338 Titanium Alloy Radiant Tube

Titanium Alloy Gas Tube

Titanium Alloy Gas Tube

Titanium ERW Tube

Titanium ERW Tube

 

Pressure Rating of Ti alloy Tubing
Tube O.D.
(in.)		 Wall Thickness of Tube (inches)
.028 .035 .049 .065 .083 .095 .109 .120
Working Pressure (psig)
1/8 7900 10100            
1/4 3700 4800 7000 9500        
5/16   3700 5400 7300        
3/8   3100 4400 6100        
1/2   2300 3200 4400        
3/4     2200 3000 4000 4600    
1       2200 2900 3400 3900 4300

 

Titanium High Precision Tube Weight Chart
Wall Thickness (inches)
Titanium Pipe Schedule
ANSI/ASME B36.19 (for S Sizes) B36.10 (for non-S sizes)
Weight per foot (pounds)
 
NPS
Desig.
O.D.
(in)
Nominal Wall Thickness
5
5S
10
10S
40
40S
80
80S
1/8 0.405 0.035  x 0.049 0.049 0.068 0.068 0.095 0.095
0.080  x 0.107 0.107 0.141 0.141 0.181 0.181
1/4 0.540 0.049  x 0.065 0.065 0.088 0.088 0.119 0.119
0.148  x 0.190 0.190 0.244 0.244 0.308 0.308
3/8 0.675 0.049  x 0.065 0.065 0.091 0.091 0.126 0.126
0.188  x 0.244 0.244 0.327 0.327 0.425 0.425
1/2 0.840 0.065 0.065 0.083 0.083 0.109 0.109 0.147 0.147
0.310 0.310 0.386 0.386 0.490 0.490 0.626 0.626
3/4 1.050 0.065 0.065 0.083 0.083 0.113 0.113 0.154 0.154
0.393 0.393 0.493 0.493 0.651 0.651 0.848 0.848
1 1.315 0.065 0.065 0.109 0.109 0.133 0.133 0.179 0.179
0.499 0.499 0.808 0.808 0.966 0.966 1.250 1.250
1-1/4 1.660 0.065 0.065 0.109 0.109 0.140 0.140 0.191 0.191
0.637 0.637 1.039 1.039 1.308 1.308 1.724 1.724
1-1/2 1.900 0.065 0.065 0.109 0.109 0.145 0.145 0.200 0.200
0.733 0.733 1.200 1.200 1.564 1.564 2.089 2.089
2 2.375 0.065 0.065 0.109 0.109 0.154 0.154 0.218 0.218
0.923 0.923 1.518 1.518 2.102 2.102 2.890 2.890
2-1/2 2.875 0.083 0.083 0.120 0.120 0.203 0.203 0.276 0.276
1.424 1.424 2.032 2.032 3.333 3.333 4.408 4.408
3 3.500 0.083 0.083 0.120 0.120 0.216 0.216 0.300 0.300
1.743 1.743 2.492 2.492 4.359 4.359 5.899 5.899
3-1/2 4.000 0.083 0.083 0.120 0.120 0.226 0.226 0.318 0.318
1.998 1.998 2.861 2.861 5.241 5.241 7.195 7.195
4 4.500 0.083 0.083 0.120 0.120 0.237 0.237 0.337 0.337
2.253 2.253 3.230 3.230 6.208 6.208 8.621 8.621
5 5.563 0.109 0.109 0.134 0.134 0.258 0.258 0.375 0.375
3.653 3.653 4.470 4.470 8.411 8.411 11.955 11.955
6 6.625 0.109 0.109 0.134 0.134 0.280 0.280 0.432 0.432
4.364 4.364 5.345 5.345 10.917 10.917 16.440 16.440

 

Standard of Ti Alloy Tubing
Grade Specification
CP Ti 40 AMS 4941, AMS 4942, AMS 4902, ASTM B338, ASME SB 338, DMS-1872, ASTM B-861, BMS 7-21, CMMP026
CP Ti 70 AMS 4901, BMS 7-21, STM 08-301, DMS 1878
CP Ti 55 AMS 4900, BMS 7-21, DMS 1878
3AL-2.5V AMS 4943, 4944, 4945, 4946, AS 5620
6AL-4V AMS 4911
CUSTOMER SPECIFIC SPECIFICATIONS
PWA 1260, GE B50TF35, DMS 2241, AIRBUS,
BMS 7-234 & OTHERS

 

Type of product Grade(s) Technical requirements*
according to
Titanium tubes and pipes Ti and Ti alloy grades 1, 2, 3, 7, 9, 11, 12, 16, 17, 26 and 28 ASTM B337, ASTM B338, ASME SB338
NACE MRO 175-94
VdTÜV 230/2
Dimensional tolerances acc. to DIN 17861 D3/T3 or closer

 

Ti Welded Tubes Grades
Titanium tube grades (other grades are available on request)
Sandvik grade UNS ASTM/ASME W.Nr. AFNOR
Ti Grade 1 (CP Ti) R50250 Grade 1 W.Nr. 3.7025 T-35
Ti Grade 2 (CP Ti) R50400 Grade 2 W.Nr. 3.7035 T-40
Ti Grade 3 (CP Ti) R50550 Grade 3 W.Nr. 3.7055 T-50
Ti Grade 7 R52400 Grade 7 W.Nr. 3.7235 -
Ti Grade 9 R56320 Grade 9 W.Nr. 3.7195 T-A3V2.5
Ti Grade 11 R52250 Grade 11 W.Nr. 3.7225 -
Ti Grade 12 R53400 Grade 12 W.Nr. 3.7105 -
Ti Grade 16 R52402 Grade 16 - -
Ti Grade 17 R52252 Grade 17 - -
Ti Grade 26 R52404 Grade 26 - -
Ti Grade 28 R52254 Grade 28 - -

 

Cold-rilled titanium Tubes Dimensions

Specific dimension for cold-rilled tubes & pipes:

OD(mm)

8.0-10.0

10.0-15.0

15.0-20.0

20.0-25.0

25.0-30.0

30.0-35.0

WT(mm)

0.15-2.0

0.2-2.0

0.4-2.7

0.45-3.2

0.45-3.3

0.45-3.4

OD(mm)

35.0-40.0

41.0-45.0

46.0-50.0

51.0-55.0

56.0-60.0

61.0-65.0

WT(mm)

0.5-3.5

0.6-3.8

0.6-3.8

0.6-4.4

0.8-4.6

0.9-4.7

OD(mm)

66.0-70.0>

71.0-75.0>

76.0-95.0

96.0-114.0

 

 

WT(mm)

1.0-4.9

1.2-6.0>

1.2-7.1

1.3-7.5

 

 


OD

0.32"-0.39"

0.39"-0.59"

0.59"-0.79"

0.79"-0.98"

0.98"-1.18"

1.18"-1.38"

WT

0.006"-0.079"

0.079"-0.79"

0.016"-0.11"

0.018"-0.126"

0.018"-0.13"

0.018"-0.134"

OD

1.38"-1.57"

1.61"-1.77"

1.81"-1.97"

2.00"-2.17"

2.20"-2.36"

2.40"-2.56"

WT

0.02"-0.138"

0.024"-0.15"

0.024"-0.15"

0.024"-0.17"

0.031"-0.18"

0.035"-0.19"

OD

2.60"-2.76"

2.80"-2.95"

2.99"-3.74"

3.78"-4.49"

 

 

WT

0.04"-0.19"

0.047"-0.24"

0.047"-0.28"

0.051"-0.30"

 

We Guarantee Fastest Delivery of 35mm/1.5 od titanium tube with All Documents Including Mill Certificate

 

Surface Finish of titanium square tube
  • Epoxy coating
  • Curran 1000 T Hybrid Epoxy
  • Thin Film Engineered Polymer Coatings
  • Phenol Epoxy
  • Curralon ®
  • Curran 1000T
  • High Functionality Epoxy - Curran Coating
  • Sakaphen- Shell and tube heat exchanger lining
  • Novolac Epoxy

 

Ti Alloy ERW Tube Welding

Ti Alloy ERW Tube WeldingThis material and its amalgams are promptly combination welded giving reasonable precautionary measures are taken. TIG and plasma measures, with argon or argon-helium protecting gas, are utilized for welding slender segment segments, ordinarily <10mm. Autogenous welding can be utilized for a segment thickness of <3mm with TIG, or <6mm with plasma. Beat MIG welding utilizing novel covered wires brings about low porosity and scatter.

 

What Are The Uses For Titanium Tubing
  • Aerospace
  • Chemical Processing
  • Power Generation
  • Oil and Gas

 

titanium gas tube Wall Thikcness
OD Wall Grades
0.125 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.125 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.125 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.187 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.187 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.187 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.236 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.236 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.236 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.250 x .016 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.250 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.250 x .022 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.250 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.250 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.250 x .049 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.312 x .016 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.312 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.312 x .022 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.312 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.312 x .032 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.312 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.375 x .019 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.375 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.375 x .022 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.375 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.375 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.375 x .042 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.375 x .049 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.394 x .016 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.394 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.394 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.394 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.472 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.472 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.472 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.500 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.500 x .022 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.500 x .026 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.500 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.500 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.500 x .043 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.500 x .049 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.500 x .056 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.500 x .065 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.625 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.625 x .023 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.625 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.625 x .032 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.625 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.625 x .042 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.625 x .044 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.625 x .049 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.625 x .054 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.625 x .071 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.625 x .083 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.750 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.750 x .024 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.750 x .027 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.750 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.750 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.750 x .039 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.750 x .052 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.750 x .065 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.750 x .083 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.787 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.787 x .023 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.787 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.787 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.875 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.875 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.875 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
0.875 x .049 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.000 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.000 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.000 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.000 x .036 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.000 x .049 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.000 x .051 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.000 x .058 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.000 x .065 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.000 x .083 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.000 x .088 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.125 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.125 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.125 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.125 x .036 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.125 x .049 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.125 x .051 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.125 x .058 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.125 x .065 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.125 x .083 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.250 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.250 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.250 x .045 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.250 x .049 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.250 x .065 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.250 x .083 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.250 x .087 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.500 x .020 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.500 x .028 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.500 x .035 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.500 x .049 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.500 x .054 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.500 x .065 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
1.500 x .083 3AL-2.5V, 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
2.000 x .028 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
2.000 x .035 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
2.000 x .049 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
2.000 x .065 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
3.000 x .028 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
3.000 x .035 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
3.000 x .049 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
3.000 x .065 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
4.000 x .028 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
4.000 x .035 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
4.000 x .049 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
4.000 x .065 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
5.000 x .028 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
5.000 x .035 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
5.000 x .049 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
5.000 x .065 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
6.000 x .028 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
6.000 x .035 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
6.000 x .049 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70
6.000 x .065 6AL-4V, CP Ti 40, CP Ti 55, CP Ti 70

 

6 Things To Know About Titanium Tube
  • Challenges Of Working With Titanium
  • The Cost Of Titanium Tube
  • Titanium Tubing With Shape Memory
  • Experts In Cutting Titanium Tube
  • Remarkable Variety Of Grades And Recipes For Titanium Tubes
  • Desirable Attributes Of Titanium Tube

 

ASTM B338 Titanium Alloy Seamless Tubing Diameter Tolerance
NPS OD Tolerance
+ –
inch mm inch mm
1/8~1 1 /2
> 1 1 /2~4
> 4~8
> 8~18
> 18~26
> 26~34
> 34~48		 1/64(0.015)
1/32(0.031)
1/16(0.062)
3/32(0.093)
1/8(0.125)
5/32(0.156)
3/16(0.187)		 0.4
0.8
1.6
2.4
3.2
4.0
4.8		 1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)		 0.8
0.8
0.8
0.8
0.8
0.8
0.8

 

Lengths of Ti Welded Tubes
  • Titanium tubes are delivered in straight lengths up to 16.5 meters (54 ft).
  • U-bent tubes are available on request.

 

Titanium Tube Wall Thickness Tolerance
NPS Tolerance, %
+ –
1/8-2 1 /2 20.0 12.5
3~18, t/D≤ 5% 22.5 12.5
3~18, t/D> 5% 15.0 12.5
≥ 20, welded 17.5 12.5
≥ 20, seamless, t/D≤ 5% 22.5 12.5
≥ 20, seamless, t/D> 5% 15.0 12.5

 

Documentation of Titanium Alloy Tube
  • Guarantee Letter
  • Heat Treatment Charts
  • NABL approved Laboratory Test Reports
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Quality Assurance Plan (QAP)
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR

 

Titanium Tube Weight Calculator

 

Chemical Composition of Titanium Alloy Tube
Grade C N O H Ti Fe
Titanium Grade 1 .08 Max .03 Max .18 Max .015 Max Bal .20 Max
Titanium Grade 4 .08 Max .05 Max .40 Max .015 Max Bal .50 Max
Titanium Grade 7 .08 Max .03 Max .25 Max .015 Max Bal .30 Max
Titanium Grade 9 .08 Max .03 Max .15 Max .015 Max - .25 Max
Titanium Grade 12 .08 Max .03 Max .25 Max 0.15 Max - .30 Max

 

Equivalent Grades for Ti Alloy Tube
STANDARD UNS WERKSTOFF NR.
Titanium Gr 2 R50400 3.7035
Titanium Gr 5 R56400 3.7165

 

Titanium High Precision Tube Mechanical properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
4.5 G/Cm3 1665 °C (3030 °F) Psi – 39900 , MPa – 275 Psi – 49900 , MPa – 344 20 %
4.43 G/Cm3 1632 °C (2970 °F) Psi – 128000 , MPa – 880 Psi – 138000 , MPa – 950 14 %

 

Diameter & Sizes of Titanium Tube
Wall Thickness Nickel Tube Sizes ( O.D.)
.010 1/16" , 1/8" , 3/16"
.020 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8"
.012 1/8"
.016 1/8" , 3/16"
.028 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2"
.035 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134 1"
.250 3"
.375 3 1/2"

 

Ti Alloy Tubing For Sale
Titanium Polish Tubes Titanium Alloy Seamless Tubes
ASTM B338 Titanium Polish Tube Titanium Seamless Tubes
Titanium Decorative Tube Titanium Alloy Round Tubes
ASME SB338 Titanium Seamless Tube Titanium Aerospace Tubes
Titanium Chemical Process Tube
Titanium Welded Coiled Tubing
Titanium Straight Tube Heat Exchanger
Titanium Mechanical Tubing
Titanium Alloy Thin Wall Tubing
Small Diameter Titanium Tubing
Titanium Welded Tubing
Titanium Tubing Bends
Titanium Alloy Umbilical Tubing
Titanium Steel Tubing
Extreme Environment Gas Tube
High Pressure Titanium Tubing

 

download
Our Products
Other Products
Blog