Using Inconel 600 bolts gives the user an edge over other traditionally used carbon steel or stainless steel bolts. Diving into specifics, the level of corrosion resistance offered by Inconel 600 hex bolt is much higher in comparison to conventional steels.
This alone makes the Inconel 600 nuts more preferable in key industries such as natural gas and petrochemical industries. To elaborate, let us take a Natural gas processing unit.The processing of natural gas is a complex industrial process by itself. This process has been designed to clean out raw natural gas by means of separating impurities. In addition, there are various non-methane hydrocarbons as well as fluids that can be used to produce what is referred to as pipeline quality dry natural gas.
During the processing of natural gas, several common contaminants such as water, carbon dioxide and hydrogen sulfide come in contact with the pieces of equipment including the Alloy 600 studs. These contaminants are highly corrosive in nature. Hence, using Din 2.4816 forging in the equipment makes sense. This is because of the varied benefits offered by the Inconel 600 threaded rod. Not only is the material, as mentioned previously resistant to corrosion, but the ASTM B160 Inconel Alloy 600 Fasteners are able to stand any curve thrown their way.
For instance, the Inconel 600 fasteners can withstand high levels of stresses as expected in a gas processing plant. In addition, the tensile strength of the Alloy 600 stud bolts is much higher than regular steel grades.
Compare Inconel 600 Bolts price with inconel 625 Bolts price list
Inconel 600 bolts are quite expensive compare to 316 Stainless steel but in Sea water, sulfuric acid, Boiler and Heat exchangers it a better option in long term due to resistance to heat and corrosion.
| Dammam -KSA, Belgium, Philippines, Indonesia | Exotic Alloy Inconel 600 Bolt |
| Czechia, Malaysia, Thailand, Germany | 2.4816 DIN 931 Hex Head Bolt |
| Bahrain, Singapore, Singapore, South Africa | DIN 933 N06600 Stud Bolt |
| Qatar, Thailand, Europe, France | CNC Machining Inconel 600 Socket Cap Screws |
| South Africa, Brazil, Kuwait, Saudi Arabia (KSA) | Fully Threaded Stud Bolt Inconel 600 C/W 2 X Heavy Hex Nut |
| Oman, UAE, Hong Kong, Malaysia | M8 M12 Inconel 600 Hex Bolt and Nut |
| Philippines, Nigeria, UK, Australia | Uns N06600 DIN 934 M16 Hex Nut |
| United Arab Emirates (UAE), Malaysia, Norway, Turkey | Inconel 600 DIN 931 Hex Cap Screws |
| Chile, Singapore, Iran, Italy | Inconel 600 DIN 976 Threaded Rod |
| Malaysia, Finland, Bangladesh, USA | Inconel 600 ® Hex Bolt and Nut |
| Egypt, UK, Mexico, Spain | inconel 600 hex socket head bolt m2.5x50mm |
| Netherlands, Dubai, Russia, Malaysia | 33mm inconel 600 custom fastener acme thread rod |
| Singapore, Malaysia, NY 12203 (USA), South Korea | Alloy 600 full threaded hex bolt DIN933 |
| UK, Ellington -United States, Poland, Canada | Inconel 600 t bolt m12 |
| United Kingdom -UK, UAE, Malaysia, Europe | Precision cnc machining inconel 600 hex bolt and nut m16 for sub marine |
| Europe, Malaysia, Romania, Japan | M30 Inconel 600 hexagon head screws bolts |
| Philippines, Singapore, Canada, Malaysia | Inconel 600 M6 M12 m25 screw bolts nuts washer |
| Malaysia, Philippines, Los Alamos -Mexico, Taiwan | M4-M64 DIN 931 inconel 600 hex bolt partial thread |
| Sweden, China, Malaysia, Colombia | Customized Threaded Rod 1/2" 13 UNC x Length 1 Meter Bolt Inconel 600 |
| ASTM Specifications | ASTM B160 /ASME SB160 |
| International Standards | all International Standards and ASTM, DIN, BS |
| Sizes in stock | 3/6" to 2" | M3 to M56 or Custom Sizes Available as per requirement |
| Producing Length | 3 mm to 200 mm |
| Most Common Fasteners Type | Lag Bolts, Square nuts, U bolts, Hex Head nuts, Eye nuts, Lock nuts, T nuts, Eye bolts, wing nuts, Counter sunk Bolts, Coupling Nuts, Square Bolts, Panel Nuts, Hex Bolt, Acorn Nuts, T bolt, Dome nuts, Hex Head Bolts |
| Description | Per Unit (INR) | Price in USD | Price in EURO |
|---|---|---|---|
| Inconel 600 Stud Bolt With 2 Un Heavy Hex, Nuts In Gr. Uns No.6600, Unc Thread.size: 3/4 Dia X 140 Mm Long | 2,955 | 40.05 | 33.55 |
| Inconel 600 Stud Bolt With 2 Un Heavy Hex. Nuts In Gr. Uns No. 6600, Unc Thread,size : 3/4 Dia X 140 Mm Long | 2,994 | 40.58 | 33.99 |
| Ss 310 Bolt( Stud) 10mm Dia X 600mm Longfully Threaded (We Intendto Claim Reward Under Meis Scheme) | 245 | 3.32 | 2.78 |
| Inconel 600 Stud Bolt With 2 Un Heavy Hex, Nuts In Gr. Uns No. 6600, Unc Thread,size : 3/4 Dia X 140 Mm Long | 2,985 | 40.45 | 33.89 |
| Stud Bolt ( 20x600) | 83 | 1.12 | 0.94 |
| Inconel 600 Stud Bolt With 2 Un Heavy Hex Nuts In Gr Uns No.6600 Unc Thread Size:3/4 Dia X 140 Mm Length | 2,909 | 39.42 | 33.03 |
We pack our goods in a various ways depending on the products. The different ways in which our products are packed are:
Alloy 600 Fasteners
Size: 3/6" to 2" | M3 to M56 or Custom Sizes
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| 600 | N06600 | NA 13 | NiCr15Fe | 2.4816 | NC15FE11M | МНЖМц 28-2,5-1,5 | NCF 600 |
The Inconel 600 is a nickel chromium alloy that has very high heat resistance and oxidation resistance. Because of these properties it is desired in high temperature services. The material can operate above 1000 degrees Celsius. The material is also resistant to carburizing and chloride ion rich environments. The combination of all of the above mechanical properties makes the material suitable for applications that have high temperature services and high corrosion risk. The furnaces operate at high temperatures and the chemical processing takes place with high corrosion probabilities. So the Alloy 600 Fasteners are used in both of these applications.
| Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
| 3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
| 1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
| 6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
| 12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
| 14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
| 16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
| 18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
| 20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
| 24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
| Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
| 2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
| 4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
| 5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
| 6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
| 8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
| 10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
| 12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
| 14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
| 16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
| 18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
| 20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
| 24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 | |
| Inconel 600 Heavy Studs | Inconel 600 Industrial Fasteners |
| Inconel 600 Nuts | Inconel 600 Bolts |
| 625 Inconel Decking Screws | 600 Inconel Weld Studs |
| DIN 2.4816, 2.4851 Inconel Hex Nuts | DIN 2.4856, 2.4668 Inconel Washers |
| 600 Inconel Machine Nuts & Bolts | 600 Inconel Timber Bolts |
| ASTM B161 Inconel 600 Fasteners | Inconel 625 Dock Washers |
| Inconel 601 J-Bolts Dealer | Inconel 600 High Nuts |
| Inconel 625 Finishing Washers | Inconel 718 Self-Drilling Screws |
| Inconel 601 Fasteners | Inconel 600 Machine Screws |
| UNS N06600, N06601 Inconel Dome Nuts | UNS N06625, N07718 Inconel Fasteners |
| Inconel 625 Tower Bolts | Inconel 625 T-Nut |
| Size | Finished Hex | Heavy Hex | Finished Jam | Heavy Hex Jam | Square | Heavy Square |
| 1/2″ Nut | 3.75 | 6.54 | 2.62 | 4.00 | 5.78 | 7.87 |
| 5/8″ Nut | 7.33 | 11.9 | 4.93 | 6.96 | 10.8 | 14.3 |
| 3/4″ Nut | 11.9 | 19.3 | 7.70 | 11.0 | 15.4 | 23.5 |
| 7/8″ Nut | 19.0 | 29.7 | 12.0 | 16.7 | 24.5 | 36.2 |
| 1″ Nut | 28.3 | 42.5 | 17.6 | 23.5 | 36.3 | 51.5 |
| 11/8″ Nut | 40.3 | 59.2 | 24.7 | 32.4 | 52.5 | 72.4 |
| 11/4″ Nut | 54.3 | 78.6 | 36.1 | 45.8 | 70.6 | 95.5 |
| 13/8″ Nut | 73.0 | 102 | 47.9 | 59.3 | 94.5 | 125.0 |
| 11/2″ Nut | 94.3 | 131 | 60.9 | 74.8 | 122 | 161 |
| 15/8″ Nut | 162 | 91.6 | ||||
| 13/4″ Nut | 151 | 204 | 100 | 114 | ||
| 17/8″ Nut | 241 | 134 | ||||
| 2″ Nut | 224 | 299 | 140 | 165 | ||
| 21/4″ Nut | 419 | 227 | ||||
| 21/2″ Nut | 564 | 332 | ||||
| 23/4″ Nut | 738 | 429 | ||||
| 3″ Nut | 950 | 545 | ||||
| 31/4″ Nut | 1194 | 651 | ||||
| 31/2″ Nut | 1526 | 851 | ||||
| 33/4″ Nut | 1812 | 1005 | ||||
| 4″ Nut | 2180 | 1200 |
Hexagon Bolts / Set Screws |
Stud Bolts |
Hexagon Nuts |
Socket Cap screws |
|---|---|---|---|
DIN 931 |
BS4882 |
DIN 934 |
DIN 912 |
DIN 933 |
DIN 976 |
BS 1768 |
DIN 6912 |
BS 1768 |
BS 1769 |
DIN 7984 |
|
UNI 5731 |
BS 1083 |
ANSI B18.3 |
|
UNI 5739 |
BS 3692 |
ISO 4762 |
|
ISO 4014 |
ISO 4032 |
UNI 5931 |
|
ISO 4017 |
ISO 4033 |
BS 2470 |
|
BS 1769 |
ANSI B18.2.2 |
BS 4168 |
|
BS 3692 |
|||
ANSI B18.2.1 |
Flange Size |
B16.5 Class 150 RF/ Ring Gaskets |
B16.5 Class 150 FF/ Full Face Gaskets |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
|||||||
1st |
2nd |
Final |
Dwg/No. |
Bolt Size |
1st |
2nd |
Final |
Dwg*/No. |
Bolt Size |
|
1/2″ |
10 |
20 |
30 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
3/4″ |
13 |
27 |
40 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1″ |
15 |
30 |
50 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1-1/4″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1-1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
2″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
2-1/2″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
3″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
3-1/2″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
4″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
5″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
6″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
8″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
10″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
12″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
14″ |
147 |
294 |
490 |
12-bolt |
1″ |
147 |
294 |
490 |
12-bolt |
1″ |
16″ |
147 |
294 |
490 |
16-bolt |
1″ |
147 |
294 |
490 |
16-bolt |
1″ |
18″ |
213 |
426 |
710 |
16-bolt |
1-1/8″ |
213 |
426 |
710 |
16-bolt |
1-1/8″ |
20″ |
213 |
426 |
710 |
20-bolt |
1-1/8″ |
213 |
426 |
710 |
20-bolt |
1-1/8″ |
24″ |
300 |
600 |
1,000 |
20-bolt |
1-1/4″ |
300 |
600 |
1,000 |
20-bolt |
1-1/4″ |
Flange Size |
B16.5 Class 300 RF/ Ring Gaskets |
||||
|---|---|---|---|---|---|
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence* |
||||
1st |
2nd |
Final |
Dwg/No. |
Stud Bolts Size |
|
1/2″ |
10 |
20 |
30 |
4-bolt |
1/2″ |
3/4″ |
15 |
30 |
50 |
4-bolt |
5/8″ |
1″ |
21 |
42 |
70 |
4-bolt |
5/8″ |
1-1/4″ |
30 |
60 |
100 |
4-bolt |
5/8″ |
1-1/2″ |
45 |
90 |
150 |
4-bolt |
3/4″ |
2″ |
33 |
66 |
110 |
8-bolt |
5/8″ |
2-1/2″ |
42 |
84 |
140 |
8-bolt |
3/4″ |
3″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
3-1/2″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
5″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
6″ |
60 |
120 |
200 |
12-bolt |
3/4″ |
8″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
10″ |
147 |
294 |
490 |
16-bolt |
1″ |
12″ |
213 |
426 |
710 |
16-bolt |
1-1/8″ |
14″ |
195 |
390 |
650 |
20-bolt |
1-1/8″ |
16″ |
273 |
546 |
910 |
20-bolt |
1-1/4″ |
18″ |
300 |
600 |
1,000 |
24-bolt |
1-1/4″ |
20″ |
300 |
600 |
1,000 |
24-bolt |
1-1/4″ |
24″ |
465 |
930 |
1,550 |
24-bolt |
1-1/2″ |
The full identification of the fasteners should be continuously marked down its whole length, including :
| Grade | C | Mn | Si | Fe | S | Cr | Cu | Ni | |
| 600 | min. | – | – | – | 6.0 | – | 14.0 | – | 72.0 |
| max. | 0.15 | 1.0 | 0.5 | 10.0 | 0.015 | 17.0 | 0.5 | – | |
| Grade | Elongation (% in 50mm) min | Strength of Yield 0.2% Proof (MPa) minimum | Strength of Tensile (MPa) minimum | Pipe Hardness | |
| Rockwell B (HR B) maximum | Brinell (HB) maximum | ||||
| 600 | 40 | Psi – 45,000 , MPa – 310 | Psi – 95,000 , MPa -655 | – | – |
| Melting Point |
|---|
| 1413 °C (2580 °F) |
APPROX. WEIGHT IN KGS FOR 100 NOS |
|||||||||||
| SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
| MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
| FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
| M-3 | 0.01 | 0.01 | |||||||||
| M-4 | 0.02 | 0.02 | |||||||||
| M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
| M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
| M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
| M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
| M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
| M-14 | 0.82 | 0.60 | 0.38 | ||||||||
| M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
| M-18 | 1.27 | 0.97 | 0.66 | ||||||||
| M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
| M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
| M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
| M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
| M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
| M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
| M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
| M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
| M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
| M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
| M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
| M-52 | 31.90 | 33.00 | 18.20 | ||||||||
| M-56 | 47.90 | 19.30 | |||||||||
| M-60 | 51.60 | 20.30 | |||||||||
| M-64 | 55.40 | 21.80 | |||||||||
| M-68 | 57.40 | ||||||||||
| M-72 | 63.40 | 24.00 | |||||||||
| Alloy | Common Name | Related Specification | |||
| British | European | ASTM | UNS | ||
| Alloy 600 | Inconel 600 ® | BS 3076 NA 14 | 2.4816 | B166 | N06600 |
| Sizes | A | B | C | Weight (lbs.) Per 100 Pieces |
| Inside Diameter | Outside Diameter | Thickness | ||
| 1/2 | 9/16 | 13/8 | 0.109 | 4 |
| 5/8 | 11/16 | 13/4 | 0.134 | 8 |
| 3/4 | 13/16 | 2 | 0.148 | 11 |
| 7/8 | 15/16 | 21/4 | 0.165 | 15 |
| 1 | 11/16 | 21/2 | 0.165 | 19 |
| 11/8 | 11/4 | 23/4 | 0.165 | 22 |
| 11/4 | 13/8 | 3 | 0.165 | 26 |
| 13/8 | 11/2 | 31/4 | 0.180 | 33 |
| 11/2 | 15/8 | 31/2 | 0.180 | 38 |
| 15/8 | 13/4 | 33/4 | 0.180 | 43 |
| 13/4 | 17/8 | 4 | 0.180 | 50 |
| 17/8 | 2 | 41/4 | 0.180 | 57 |
| 2 | 21/8 | 41/2 | 0.180 | 63 |
| 21/4 | 23/8 | 43/4 | 0.220 | 83 |
| 21/2 | 25/8 | 5 | 0.238 | 96 |
| 23/4 | 27/8 | 51/4 | 0.259 | 110 |
| 3 | 31/8 | 51/2 | 0.284 | 130 |
| Density |
|---|
| 8.47 g/cm3 |
| MM THREADS AS PER IS 1363/67 | ||||||||||
| APPROXIMATE WEIGHT IN KGS FOR 100 NOS | ||||||||||
| LENGTH | DIAMETER | |||||||||
| M 5 | M 6 | M 8 | M 10 | M 12 | M 14 | M 16 | M 18 | M 20 | M 22 | |
| 16 mm | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
| 20 mm | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
| 25 mm | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
| 30 mm | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
| 35 mm | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
| 40 mm | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
| 45 mm | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
| 50 mm | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
| 55 mm | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
| 60 mm | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
| 65 mm | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
| 70 mm | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
| 75 mm | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
| 80 mm | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
| 90 mm | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
| 100 mm | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
| 110 mm | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
| 120 mm | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
| 130 mm | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
| 140 mm | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
| 150 mm | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
| 160 mm | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
| 170 mm | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
| 180 mm | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
| 190 mm | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
| 200 mm | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
| 220 mm | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
| 240 mm | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
| 250 mm | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
| 260 mm | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
| 280 mm | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
| 300 mm | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
| 320 mm | 31.646 | 56.818 | 92.593 | |||||||
| 340 mm | 33.557 | 60.241 | 98.039 | |||||||
| 360 mm | 35.211 | 63.291 | 104.167 | |||||||
| 380 mm | 37.037 | 66.667 | 108.696 | |||||||
| 400 mm | 39.063 | 69.444 | 113.636 | |||||||
