Raaj Sagar Steels

Inconel 600 Round Bar

ASTM B166 UNS N06600 Hex Bar and Flat Bar at best price in India

 

Inconel 600 Round Bar

Manufacturer & supplier of Nickel Alloy 600 Rod & DIN 2.4816 cold drawn bars

In the pulp and paper industry, the factory uses a cellulose based starter, which is referred to as the pulp. This cellulose based starter are treated to several chemicals such as bleaching and various mechanical processing.

Commercial bleaches used in the whitening of paper could either be oxidative like hypochlorite or they could be reductive bleaches such as Sodium borohydride. Often peroxide bleach or hypochlorite when used with paper cellulose often leads to an oxidative reaction, which if practised repeatedly can decay the alloy. However, if a factory uses Inconel 600 Round Bar for their production, the chances of getting corroded by oxidation remain small.

This is because of the chromium oxide rich layer formed on the Alloy 600 Nickel hot rolled bar. Chromium present on the surface of Alloy 600 bars reacts with oxygen in the atmosphere and gets attached to the oxygen molecules. Which means there is a passivated layer that is formed over the UNS N06600 bar. Now, this layer is something that forms a sort of barrier between the surface of the 2.4816 Alloy 600 square bar alloy, thus, preventing oxidation corrosion effectively.

In the case of reductive bleaches being used, the higher contents of nickel and molybdenum present in ASTM B166 UNS N06600 effectively narrows the chances for Inconel 600 hex bar getting decayed. Moreover, the Werkstoff 2.4816 flat bar is a nickel based superalloy with added tungsten in its chemistry. This significant addition of tungsten in Inconel 600 rod is what improves the corrosion resistance properties across a wide range of severe conditions.

 

compare Inconel 600 Round bar price with inconel 625 round bar price list

 

Table Of Content:

 

Inconel 600 round bar Stocking Sizes

Alloy 600 round bar

  • Size: 5 To 500 millimeter
  • Diameter : 0.1 to 100 millimeter

 

 

Stocking Distributors of Following types of Alloy 600 Round Bar
Alloy 600 cold drawn bar
Alloy 600 cold drawn bar
inconel 600 forged bar
Inconel 600 forged bar
alloy 600 bright bar
alloy 600 bright bar
Alloy 600 din 2.4816 rod
Alloy 600 din 2.4816 rod
inconel 600 rod
Inconel 600 rod
Alloy 600 hex bar
Alloy 600 hex bar
inconel 600 square rod
Inconel 600 square rod
Alloy 600 hot rolled bar
Alloy 600 hot rolled bar

 

Check weight & dimensions of ASME SB 166 N06600 Hot Rolled Square Bar and Pump Shaft

Inconel 600 Bar Forging

Max. size in Inconel 600 Forged bars is up to 100 mm in Diameter. In Alloy 600 annealing start at 871°C and complete at 982°C. So Alloy 600 round bar can be forged at this temperature. should buy as per certification and specification of ASTM B166, AMS 5665

 

Inconel 600 rod Material Specification
Specifications grade ASTM B166 / ASME SB166
Dimensions standard EN, AISI, JIS, BS, DIN, ASTM, ASME
Size in mm
 5 To 500 millimeter
Available Diameter 0.1 to 100 millimeter
Stocking Length 100 To 3000 millimeter Long or Above than it
Finishes Rough, BA Finish, Polished, NO.4 Finish, Black, Matt Finish, Bright, Turned
find Tolerance H8, H10, H12, H11, H13K9, K11, K10, H9, K12 or as per clients’ specification
Basic Form Hex (A/F), Square, Ingot, Rectangle,Forging, Billet, Round

 

Typical Mechanical Property Ranges of Alloy 600 flat rod
Grade Elongation (% in 50mm) min Strength of Yield 0.2% Proof (MPa) minimum Strength of Tensile (MPa) minimum Hardness
Rockwell B (HR B) maximum Brinell (HB) maximum
600 40 Psi – 45,000 , MPa – 310 Psi – 95,000 , MPa -655 – –

 

Are you searching your specific size and length in Inconel 600 Rod? Check our stock with price list
Chemical Resistance Guide of astm b166 uns n06600 rod
Grade C Mn Si Fe S Cr Cu Ni
600 min. – – – 6.0 – 14.0 – 72.0
max. 0.15 1.0 0.5 10.0 0.015 17.0 0.5 –

 

Table of Equivalent grade of Alloy 600 hex rod
Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Alloy 600 N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600

 

Know in detail about exact specification of Alloy 600 Forged Bars & hexagon bar with best price Ex Mumbai

 

What is the difference between Inconel 600 bright bar and cold rolled square bar?

The Inconel 600 material is a nickel chromium alloy that has high temperature resistance, high oxidation resistance and high resistance to most mild chemicals and acids. The bars are used in applications that deal with high temperatures and corrosive environments. The bright bar is polished to have a bright surface with less absolute roughness. The cold rolled square bar is square in its cross section and is produced through a cold drawing procedure. This also has less absolute roughness due to the cold drawing. But the square bar is stronger than the round bar and is used in structural applications mostly.

 

Types Of Available inconel 600 rod
Inconel WERKSTOFF NR. 2.4816 Hex Bar 600 Inconel Threaded Bar
alloy 600 Square Bar Polished Inconel UNS N06600 Bright Bar Hot Rolled
ASTM B166 Inconel 600 Round Bars alloy 600 Flat Bar stock
Nickel Alloy 600 Rectangular Bar Annealed Alloy Inconel 600 Polished Hex Bar
2.4816 Inconel 600 Hex Bar Bright 600 Inconel Alloy Hollow Bar
ASTM B166 600 Inconel Hex Bar Polished Inconel 600 Hexagonal Bar
Inconel UNS N06600 Round Bar Inconel 600 Din 2.4816 Flat Bar
ASTM B166 600 Inconel Rectangular Bar Inconel WERKSTOFF NR. 2.4816 Threaded Bar Black
600 Inconel Rounds 600 Alloy Flat Bar Bright
alloy 600 Bar Alloy Inconel 600 Flat Bar Black
Alloy Inconel 600 Hex Bar Annealed Inconel WERKSTOFF NR. 2.4816 Cold Drawn Round Bar
Inconel 600 Rod Inconel UNS N06600 Flat Bar Annealed
Inconel Alloy 600 Bright Bar 600 Inconel Flat Bar Polished
600 Inconel Alloy Rods UNS N06600 Inconel Flat Bar Cold Drawn
600 Inconel Square Bar Cold Drawn alloy 600 Bright Bar material
600 Alloy Forged Bar Nickel Alloy 600 Polished Bar

 

inconel 600 welding rod Length
  • Metric system: standard length is 9 - 12 metres
  • USA : 40 feet

 

DIN 2.4816 Hex Bar Price in India
Description Per Unit (INR) Price in USD
Nickel Alloy Round Bars Grade Inconel 600, Uns N06600 1,111 14.90
Inconel Round Bar Bright Inconel L600 Size: 20mm Diameter[reimport Goods Exported Vide S/b.3236545 Dt 28.12.2012] 4,684 62.83
Nickel Alloy Round Bars Grade Inconel 600, Uns N06600 944 12.66
Nickel Alloy Round Bar Astm A453 Grade Inconel 600a - Size: Dia.60 Mm 1,012 13.57

 

Nickel Alloy 600 Square Bar Condition
H&T Hardened and tempered.
ANN Annealed
PH Precipitation hardened.

 

ASTM B166 UNS N06600 Flat Bar Tolerances
Tolerances for Cold Drawn Inconel 600 Round Bar
Shape / Section Size, diameter or width across flats Permitted variation
mm mm
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100		 + 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
Flat (thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80		 + 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.250
+ 0 to - 0.350
Flat (width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320		 + 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.190
+ 0 to - 0.220
+ 0 to - 0.350
+ 0 to - 1.00
+ 1.00 to - 1.00
Square and
hexagon		 ≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105		 + 0 to - 0.090
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.250

 

Tolerances of Turned ASTM B166 Inconel 600 Round Bar (BS 970-3)

Turned inconel 600 round bar Tolerances
inconel 600 round bar Size, diameter Permitted variation
mm mm
≧ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 120
> 120 ≦ 180
> 180 ≦ 250
> 250 ≦ 315
> 315 ≦ 400
> 400		 + 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
+ 0 to - 0.160
+ 0 to - 0.185
+ 0 to - 0.210
+ 0 to - 0.230
+ 0 to - 0.250

 

Tolerances of Precision Inconel WERKSTOFF NR. 2.4816 Round Bar (BS 970-3)

Precision Nickel Alloy 600 Round Bar Tolerances
Section Size,
diameter		 Permitted overall variation
Class A Class B Class C
mm mm mm mm
Round ≧ 6 <75 0.05 0.025 0.013

 

ASME SB166 inconel 600 rod Available forms & shapes
  • Channel Bars
  • Precision Ground Bars
  • Round Rod
  • Flat Bars
  • Hollow
  • Round
  • Blocks
  • T-Bars
  • Rings
  • Square
  • Rod
  • Rectangle
  • Forging
  • Triangle
  • Rectangular Bar
  • Threaded
  • Hex (A/F)
  • Ingot
  • Billet
  • Half Round Bars
  • I/H Bars
  • Profiles

 

Inconel 600 Round Bar finishes
CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

 

Alloy 600 Rod Stock List
Alloy Product form Dimension
Alloy 600 AMS 5665 (75 Ni/16 Cr) annealed, centerless ground h9 Dia=10.0 mm, Weight=0.7 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) annealed, centerless ground Dia=12.0 mm, Weight=1.0 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) cold drawn, annealed Dia=16.0 mm, Weight=1.8 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) hot finished, annealed, ground Dia=20.0 mm, Weight=2.7 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) hot worked, annealed Dia=25.4 mm, Weight=4.2 kg/m
Alloy 600 (75 Ni/16 Cr) hot finished, annealed, ground Dia=30.0 mm, Weight=6.2 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) extruded round, machined, annealed Dia=35.0 mm, Weight=8.3 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) hot worked, annealed, peeled Dia=40.0 mm, Weight=10.9 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) hot finished, annealed, peeled Dia=45.0 mm, Weight=13.8 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) forged, annealed, peeled Dia=50.4 mm, Weight=16.6 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) annealed, peeled Dia=60.0 mm, Weight=24.4 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) peeled Dia=65.0 mm, Weight=28.0 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) hot worked, annealed, peeled Dia=76.2 mm, Weight=39.5 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) hot rolled, annealed, peeled Dia=90.0 mm, Weight=54.0 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) peeled, annealed Dia=100.0 mm, Weight=67.0 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) annealed, peeled Dia=115.0 mm, Weight=86.0 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) forged, annealed, machined Dia=130.0 mm, Weight=116 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) forged, annealed, peeled Dia=150.0 mm, Weight: 146 kg/m
Alloy 600 AMS 5665 (75 Ni/16 Cr) forged, annealed, turned Dia=200.0 mm, Weight=265 kg/m

 

DIN 2.4816 Cold Drawn Bars Material Properties
Specific Gravity
8.42 g/cm3
Typical Applications Related Specifications
  • Chemical industry
  • Nuclear Engineering
  • Pulp and paper industry
  • Off-Shore Oil Drilling Companies
  • Food processing
  • Power Generation
  • Petrochemicals
  • Gas turbine components
  • Gas Processing
  • Aerospace
  • Heat treating industry
  • ASTM B166 Bar
  • W. Nr 2.4816
  • MIL N 6710
  • AMS 5665 Bar, Forgings and Rings
  • QQ W 390
  • MIL N 23229
  • MIL N 15721
  • MIL N 23338
  • MIL N 22986
  • NA14
  • MIL N 22987
  • MIL N 6840
  • UNS N06600

 

Nickel Alloy 600 bar Dimensions table
Size & Dimensions of inconel 600 round bar
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.600 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.600 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

 

Inconel 600® Round bar Uses
  • Railway engines and coaches
  • making arms and ammunition
  • conveyor shafts
  • to produce Cold headed components
  • Automobile Industries to make nuts, bolts, shafts used in Agricultural sector
  • manufacturing gears, bearings, and hinges for Electric pumps / motors
  • Textile industry
  • Heavy engineering Industries

 

AMS 5665 bar Weights chart
Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20mm 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22mm 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4mm 0.030 0.098 24mm 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25mm 1.180 3.871 4" 19.306 63.340
5mm 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26mm 1.271 4.170 4-1/2" 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7mm 0.091 0.298 30mm 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8mm 0.120 0.398 32mm 1.894 6.314 6-1/2" 51.093 167.630
9mm 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35mm 2.390 7.553 7-1/2" 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8" 77.586 254.55
11mm 0.228 0.748 38mm 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951      
12mm 0.271 0.889 40mm 3.009 9.872      
1/2" 0.303 0.994 1-5/8" 3.200 10.449      
13mm 0.318 1.043 1-3/4" 3.712 12.179      
14mm 0.368 1.207 45mm 3.807 12.555      
9/16" 0.383 1.256 1-7/8" 4.260 13.977      
15mm 0.424 1.391 48mm 4.330 14.205      
5/8" 0.473 1.551 50mm 4.698 15.414      
16mm 0.481 1.578 2" 4.848 15.906      
17mm 0.543 1.791 2-1/8" 5.475 17.963      
11/16" 0.573 1.880 2-1/4" 6.135 20.128      
18mm 0.610 2.001 60mm 6.768 22.205      
3/4" 0.682 2.237 2-3/8" 6.838 22.435      
      2-1/2" 7.576 24.856      
      2-5/8" 8.354 27.409      
      2-3/4" 9.169 30.083

 

Standard Sizes of ASTM B166 UNS N06600 Hex Bar
SS hex bar Size in Inches
SS hex bar Wt per Ft
SS hex bar Wt per 12′
3/16″
0.104
1.248
1/4″
0.180
2.160
5/16″
0.290
3.480
3/8″
0.600
4.920
7/16″
0.560
6.72
1/2″
0.740
8.880
9/16″
0.930
11.16
5/8″
1.150
13.80
11/16″
1.390
16.68
3/4″
1.660
19.92
13/16″
1.950
23.40
7/8″
2.300
27.60
15/16″
2.600
31.20
1″
2.90
34.80
1-1/16″
3.30
39.60
1-1/8″
3.700
44.40
1-1/4″
4.600
55.20
1-5/16″
5.100
61.20
1-3/8″
5.600
67.20
1-7/16″
6.100
73.20
1-1/2″
6.600
79.20
1-5/8″
7.800
93.60
1-3/4″
9.030
108.36
1-7/8″
10.400
124.80
2″
11.80
141.60
2-1/4″
14.920
179.04
2-3/8″
16.920
203.04
2-1/2″
18.42
221.04
3″
26.53
318.36

 

Alloy 600 Flat Bar Sizes
Inconel 600 Flat bar – metric sizes and weights
Flat Size
KG’s per Metre
Standard Length (metres)
Colour Code
10 x 3
0.24
6.0
Blue
13 x 3
0.31
6.0
Blue
13 x 5
0.46
6.0
Orange
16 x 3
0.38
6.0
Blue
16 x 5
0.64
6.0
Orange
16 x 8
1.03
6.0
Red
20 x 3
0.48
6.0
Blue
20 x 5
0.81
6.0
Orange
20 x 6
0.97
6.0
White
20 x 10
1.61
6.0
Yellow
25 x 3
0.60
6.0
Blue
25 x 5
1.01
6.0
Orange
25 x 6
1.21
6.0
White
25 x 8
1.61
6.0
Red
25 x 10
2.01
6.0
Yellow
25 x 12
2.41
6.0
Pink
32 x 3
0.77
6.0
Blue
32 x 5
1.29
6.0
Orange
32 x 6
1.55
6.0
White
32 x 8
2.06
6.0
Red
32 x 10
2.58
6.0
Yellow
32 x 12
3.09
6.0
Pink
40 x 3
0.97
6.0
Blue
40 x 5
1.61
6.0
Orange
40 x 6
1.93
6.0
White
40 x 8
2.58
6.0
Red
40 x 10
3.22
6.0
Yellow
40 x 12
3.86
6.0
Pink
40 x 16
5.15
6.0
Grey
40 x 20
6.14
6.0
Green
50 x 3
1.21
6.0
Blue
50 x 5
2.01
6.0
Orange
50 x 6
2.41
6.0
White
50 x 8
3.22
6.0
Red
50 x 10
4.02
6.0
Yellow
50 x 12
4.83
6.0
Pink
50 x 16
6.44
6.0
Grey
50 x 20
8.05
6.0
Green
50 x 25
10.1
6.0
Purple
65 x 3
1.57
6.0
Blue
65 x 5
2.62
6.0
Orange
65 x 6
3.14
6.0
White
65 x 8
4.18
6.0
Red
65 x 10
5.23
6.0
Yellow
65 x 12
6.28
6.0
Pink
65 x 16
8.37
6.0
Grey
65 x 20
10.5
6.0
Green
65 x 25
13.1
6.0
Purple
75 x 5
3.02
6.0
Orange
75 x 6
3.62
6.0
White
75 x 8
4.83
6.0
Red
75 x 10
6.04
6.0
Yellow
75 x 12
7.24
6.0
Pink
75 x 16
9.66
6.0
Grey
75 x 20
12.1
6.0
Green
75 x 25
15.1
6.0
Purple
75 x 40
24.1
6.0
Yellow
90 x 5
3.62
6.0
Orange
90 x 6
4.35
6.0
White
90 x 8
5.79
6.0
Red
90 x 10
7.24
6.0
Yellow
90 x 12
8.69
6.0
Pink
100 x 5
4.02
6.0
Orange
100 x 6
4.83
6.0
White
100 x 8
6.44
6.0
Red
100 x 10
8.05
6.0
Yellow
100 x 12
9.66
6.0
Pink
100 x 16
12.9
6.0
Grey
100 x 20
16.1
6.0
Green
100 x 25
20.1
6.0
Purple
100 x 50
40.2
6.0
Green
110 x 6
5.31
6.0
White
110 x 8
7.08
6.0
Red
110 x 10
8.85
6.0
Yellow
110 x 12
10.6
6.0
Pink
130 x 5
5.23
6.0
Orange
130 x 6
6.28
6.0
White
130 x 8
8.37
6.0
Red
130 x 10
10.5
6.0
Yellow
130 x 12
12.6
6.0
Pink
130 x 16
16.7
6.0
Grey
130 x 20
20.9
6.0
Green
130 x 25
26.2
6.0
Purple
150 x 5
6.04
6.0
Orange
150 x 6
7.24
6.0
White
150 x 8
9.66
6.0
Red
150 x 10
12.1
6.0
Yellow
150 x 12
14.5
6.0
Pink
150 x 16
19.3
6.0
Grey
150 x 20
24.1
6.0
Green
150 x 25
30.1
6.0
Purple
150 x 50
60.4
6.0
Green
180 x 5
7.24
6.0
Orange
180 x 6
8.69
6.0
White
180 x 10
14.5
6.0
Yellow
180 x 12
17.4
6.0
Pink
180 x 16
23.2
6.0
Grey
180 x 20
29.0
6.0
Green
180 x 25
36.2
6.0
Purple
200 x 6
9.66
6.0
White
200 x 8
12.9
6.0
Red
200 x 10
16.1
6.0
Yellow
200 x 12
19.3
6.0
Pink
200 x 16
25.7
6.0
Grey
200 x 20
32.2
6.0
Green
200 x 25
40.3
6.0
Purple
250 x 6
12.1
6.0
White
250 x 8
16.1
6.0
Red
250 x 10
20.1
6.0
Yellow
250 x 12
24.1
6.0
Pink
250 x 16
32.2
6.0
Grey
250 x 20
40.2
6.0
Green
250 x 25
50.3
6.0
Purple
300 x 6
14.5
6.0
White
300 x 8
19.3
6.0
Red
300 x 10
24.1
6.0
Yellow
300 x 12
29.0
6.0
Pink
300 x 16
38.6
6.0
Grey
300 x 20
48.3
6.0
Green
300 x 25
60.4
6.0
Purple

 

DIN 2.4816 Round Bar Size Chart
Size & Dimensions of Inconel 600 round bar
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.625 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.625 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

 

Nickel Alloy 600 bar Marking & Packing

Types of Packaging:

– Bundles (hexagonal)
– Wooden Boxes
– Crates (steel/wooden)
– Packaging for Rod as per customer’s requirements

 

Inconel 600® Rod Application Industries
  • Gas Processing
  • Pharmaceuticals
  • Chemical Equipment
  • Petrochemicals
  • Specialty Chemicals
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Pharmaceutical Equipment

 

 

download
Our Products
Other Products
Blog