ASTM B348 Ti Alloy Rod & Hex Bar Suppliers in many sizes & surface finish, view Price In India

Titanium Round Bar

 

Check specification & Weight of Pure Titanium Flat/Square bar, we supply cold drawn & hot rolled bar stock at factory price

Titanium is a rare metal, with exceptional properties, including resistance to chlorine ions. However, the benefit of using a Titanium Round Bar is that it is light in weight. Being a lightweight metal offers weight saving advantages not only to the user but also to the worker installing it. When stainless steels are used in applications, the more conventional ones such as grade 304 or 316 tend to be heavier and denser. Since the density of a Titanium Square Bar is low, the installation of these bars is quicker and the work done is also more efficient.

Moreover, the corrosion resistance of titanium is also what attracts Titanium Round Bar Suppliers. The strength of titanium is almost 2 times that of aluminum, although the density is 60% more than the former. Although it is possible to use Pure Titanium Flat Bar at high temperatures, the use of heat exceeding a temperature of 430 °C causes loss in strength. Because the alloy is ductile, the hardness properties of commercially pure titanium are lower than some grades of heat treated steels. Because the ASTM B348 Ti Alloy Hex Bar undergoes a phenomenon known as Atmospheric passivation, these bars tend to exhibit excellent resistance to corrosion, which is almost on similar terms to platinum.

before buy compare price of Titanium Round Bar with Monel round bar price list

 

 

ASTM B348 Titanium Round Bar Specification
Dimensions DIN, EN, ASTM, JIS, ASME, BS, AISI
Round bar size Diameter: 3-~800mm
Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Rectangular Bars Section 3.0 to 12.0mm thickness
Billet Size 1/2 to 495mm Diameter
Rectangles Size 33 x 30mm to 295 x 1066mm
Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Dimensions Diameter / Height:

Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Surface Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished
Condition Hardened & tempered, annealed
Technique Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod
Processing Bar cutting to 650mm
Form Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc.

 

Titanium Round Bar Price
Description Per Unit (INR) Price in USD Price in EURO
Bar Round Titanium Alloy. 06.00mm (C.excise No Vgn(30)26/g.b.adler/rtn/t/2016/1015 Dt 18.11.16 Item No 1) 5,363 72.66 59.96
Bar Round Titanium Alloy. Dia 20.00mm (C.excise No Vgn(30)26/g.b.adler/rtn/t/2016/1015 Dt 18.11.16 Item No 3) 3,281 44.45 36.68
Bar Round Titanium Alloy. 16.00mm (C.excise No Vgn(30)26/g.b.adler/rtn/t/2016/1015 Dt 18.11.16 Item No 4) 4,050 54.87 45.28
Bar Round Titanium Alloy. Dia 14.00mm (C.excise No Vgn(30)26/g.b.adler/rtn/t/2016/885 Dt 07.10.16 Item No 2) 4,774 64.68 53.38
Titanium Round Bar 6al-4v 4.53 Diax12 R/l (7 Pcs) 2,453 33.23 27.43
Bar Round Titanium Alloy. 18.00mm (C.excise No Vgn(30)26/g.b.adler/rtn/t/2016/1015 Dt 18.11.16 Item No 2) 3,669 49.71 41.02
Bar Round Titanium Alloy. 20.00mm (C.excise No Vgn(30)26/g.b.adler/rtn/t/2016/885 Dt 07.10.16 Item No1) 3,281 44.45 36.68
Bar Round Titanium Alloy. Dia 10.00mm (C.excise No Vgn(30)26/g.b.adler/rtn/t/2016/885 Dt 07/10/16 Item No 4) 6,104 82.70 68.25
Bar Round Titanium Alloy. Dia 12.00mm (C.excise No Vgn(30)26/g.b.adler/rtn/t/2016/885 Dt 07/10/16 Item No 3) 4,631 62.74 51.78
Titanium Round Bars 1,832 24.82 20.48

 

Don't forget to check our titanium round bar diameter tolerance, stock and weight calculator online here

 

Bending Titanium Round Bar

Bending Titanium Round Bar

 

Bending Titanium Round BarBending is a generally received cold forming method utilized for segments made of titanium. One of the significant plan contemplations in framing such parts is to represent the versatile recuperation subsequent to dumping — the purported spring-back impact. Likewise, the leftover anxieties caused in the example because of the inelastic misshapenings during shaping importantly affect the heap conveying limit of the framed component.The trial gadget comprises of 2 rollers and an arm. The fixed roller directs the titanium bar while the moving roller twists it.

 

Titanium Round Bar Stock
Diameter Random Length
0.187 inches4.7498 mm 10 ft20 ft
1/4 inches6.35 mm 10 ft20 ft
0.312 inches7.9248 mm 10 ft20 ft
3/8 inches9.525 mm 10 ft20 ft
0.437 inches11.0998 mm 10 ft20 ft
1/2 inches12.70 mm 10 ft20 ft
0.562 inches14.2748 mm 10 ft20 ft
5/8 inches15.875 mm 10 ft20 ft
0.687 inches17.4498 mm 10 ft20 ft
3/4 inches19.05 mm 10 ft20 ft
0.812 inches20.6248 mm 10 ft20 ft
7/8 inches22.225 mm 10 ft20 ft
0.937 inches23.7998 mm 10 ft20 ft
1 inches25.40 mm 10 ft20 ft
1.062 inches26.9748 mm 10 ft20 ft
1 1/8 inches28.575 mm 10 ft20 ft
1.187 inches30.1498 mm 10 ft20 ft
1 1/4 inches31.75 mm 10 ft20 ft
1.312 inches33.3248 mm 10 ft20 ft
1.375 inches34.925 mm 10 ft20 ft
1.437 inches36.4998 mm 10 ft20 ft
1 1/2 inches38.10 mm 10 ft20 ft
1.562 inches39.6748 mm 10 ft20 ft
1 5/8 inches41.275 mm 10 ft20 ft
1.687 inches42.8498 mm 10 ft20 ft

 

Quality & Inspection Of Titanium Round Bar
Quality & Inspection Of Titanium Round Bar
  • All required Mechanical and metallurgical tests are carried out at our works.
  • EN10204/3.1 Certificate as per ADW0
  • Each lot is tested and ensured that material is free from Radio active contamination.
  • Container is fumigated before stuffing. All wooden box /blockes are also fumigated.
  • All Titanium Round Bar are free from any internal defects
  • Bundles of Ti Alloy Rod are made of 500/1000kgs each packed in HDPE sheets.
  • Each Titanium Round Bar is tested for size tolerance, Ovality, length and Roughness.

 

Finishes of Titanium Round Bar
CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

 

Titanium Alloy round bar Types
Titanium Alloy Round Bar

Titanium Alloy Round Bar

Titanium Alloy Rod

Titanium Alloy Rod

Titanium Bar Material

Titanium Bar Material

ASTM B348 Ti Alloy Flat Bar

ASTM B348 Ti Alloy Flat Bar

Titanium ASTM B348 Square Bar

Titanium ASTM B348 Square Bar

Titanium Hex Bar

Titanium Hex Bar

Titanium Alloy Polished Bar

Titanium Alloy Polished Bar

Pure Titanium Rounds

Pure Titanium Rounds

ASTM B348 Ti Flat Bar Hot Rolled

ASTM B348 Ti Flat Bar Hot Rolled

ASTM B348 Ti Alloy Black Bar

ASTM B348 Ti Alloy Black Bar

Pure Titanium Bright Bar

Pure Titanium Bright Bar

ASTM B348 Titanium Annealed Bar

ASTM B348 Titanium Annealed Bar

Titanium Alloy Round Bar Cold Drawn

Titanium Alloy Round Bar Cold Drawn

Alloy Titanium Flat Bar Cold Drawn

Alloy Titanium Flat Bar Cold Drawn

ASTM B348 Ti Alloy Square Bar Hot Rolled

ASTM B348 Ti Alloy Square Bar Hot Rolled

Titanium ASTM B348 Round Bar Hot Rolled

Titanium ASTM B348 Round Bar Hot Rolled

 

Find bending 10/8 mm pure titanium rod technology here, Specific size and thickness are available

 

Marking & Packing Of 6al-4v Titanium Round Bar
titanium round bar packaging
ti alloy rod packaging

Types of Packaging:

– Bundles (hexagonal)
– Wooden Boxes
– Crates (steel/wooden)
– Packaging for Rod as per customer’s requirements

  

Size Range of ASME SB348 pure titanium round bar
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.625 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.625 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

 

titanium round bar weight
Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20mm 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22mm 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4mm 0.030 0.098 24mm 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25mm 1.180 3.871 4" 19.306 63.340
5mm 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26mm 1.271 4.170 4-1/2" 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7mm 0.091 0.298 30mm 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8mm 0.120 0.398 32mm 1.894 6.314 6-1/2" 51.093 167.630
9mm 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35mm 2.390 7.553 7-1/2" 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8" 77.586 254.55
11mm 0.228 0.748 38mm 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951      
12mm 0.271 0.889 40mm 3.009 9.872      
1/2" 0.303 0.994 1-5/8" 3.200 10.449      
13mm 0.318 1.043 1-3/4" 3.712 12.179      
14mm 0.368 1.207 45mm 3.807 12.555      
9/16" 0.383 1.256 1-7/8" 4.260 13.977      
15mm 0.424 1.391 48mm 4.330 14.205      
5/8" 0.473 1.551 50mm 4.698 15.414      
16mm 0.481 1.578 2" 4.848 15.906      
17mm 0.543 1.791 2-1/8" 5.475 17.963      
11/16" 0.573 1.880 2-1/4" 6.135 20.128      
18mm 0.610 2.001 60mm 6.768 22.205      
3/4" 0.682 2.237 2-3/8" 6.838 22.435      
      2-1/2" 7.576 24.856      
      2-5/8" 8.354 27.409      
      2-3/4" 9.169 30.083

 

Delivery Condition Of Astm B348 Ti Alloy Hex Bar
  • Turned & rough polished
  • The strain Hardened
  • Cold drawn
  • Peeled, center less ground & polished
  • Peeled and polished
  • Trailed center less ground & polished
  • Annealed
  • Hardened strain
  • Solenoid quality
  • Smooth Turned & Polished

 

Titanium Round Bar Weight Calculator

 

Pure Titanium Flat Bar Size Chart
Titanium Flat bar – metric sizes and weights
Flat Size
KG’s per Metre
Standard Length (metres)
Colour Code
10 x 3
0.24
6.0
Blue
13 x 3
0.31
6.0
Blue
13 x 5
0.46
6.0
Orange
16 x 3
0.38
6.0
Blue
16 x 5
0.64
6.0
Orange
16 x 8
1.03
6.0
Red
20 x 3
0.48
6.0
Blue
20 x 5
0.81
6.0
Orange
20 x 6
0.97
6.0
White
20 x 10
1.61
6.0
Yellow
25 x 3
0.60
6.0
Blue
25 x 5
1.01
6.0
Orange
25 x 6
1.21
6.0
White
25 x 8
1.61
6.0
Red
25 x 10
2.01
6.0
Yellow
25 x 12
2.41
6.0
Pink
32 x 3
0.77
6.0
Blue
32 x 5
1.29
6.0
Orange
32 x 6
1.55
6.0
White
32 x 8
2.06
6.0
Red
32 x 10
2.58
6.0
Yellow
32 x 12
3.09
6.0
Pink
40 x 3
0.97
6.0
Blue
40 x 5
1.61
6.0
Orange
40 x 6
1.93
6.0
White
40 x 8
2.58
6.0
Red
40 x 10
3.22
6.0
Yellow
40 x 12
3.86
6.0
Pink
40 x 16
5.15
6.0
Grey
40 x 20
6.14
6.0
Green
50 x 3
1.21
6.0
Blue
50 x 5
2.01
6.0
Orange
50 x 6
2.41
6.0
White
50 x 8
3.22
6.0
Red
50 x 10
4.02
6.0
Yellow
50 x 12
4.83
6.0
Pink
50 x 16
6.44
6.0
Grey
50 x 20
8.05
6.0
Green
50 x 25
10.1
6.0
Purple
65 x 3
1.57
6.0
Blue
65 x 5
2.62
6.0
Orange
65 x 6
3.14
6.0
White
65 x 8
4.18
6.0
Red
65 x 10
5.23
6.0
Yellow
65 x 12
6.28
6.0
Pink
65 x 16
8.37
6.0
Grey
65 x 20
10.5
6.0
Green
65 x 25
13.1
6.0
Purple
75 x 5
3.02
6.0
Orange
75 x 6
3.62
6.0
White
75 x 8
4.83
6.0
Red
75 x 10
6.04
6.0
Yellow
75 x 12
7.24
6.0
Pink
75 x 16
9.66
6.0
Grey
75 x 20
12.1
6.0
Green
75 x 25
15.1
6.0
Purple
75 x 40
24.1
6.0
Yellow
90 x 5
3.62
6.0
Orange
90 x 6
4.35
6.0
White
90 x 8
5.79
6.0
Red
90 x 10
7.24
6.0
Yellow
90 x 12
8.69
6.0
Pink
100 x 5
4.02
6.0
Orange
100 x 6
4.83
6.0
White
100 x 8
6.44
6.0
Red
100 x 10
8.05
6.0
Yellow
100 x 12
9.66
6.0
Pink
100 x 16
12.9
6.0
Grey
100 x 20
16.1
6.0
Green
100 x 25
20.1
6.0
Purple
100 x 50
40.2
6.0
Green
110 x 6
5.31
6.0
White
110 x 8
7.08
6.0
Red
110 x 10
8.85
6.0
Yellow
110 x 12
10.6
6.0
Pink
130 x 5
5.23
6.0
Orange
130 x 6
6.28
6.0
White
130 x 8
8.37
6.0
Red
130 x 10
10.5
6.0
Yellow
130 x 12
12.6
6.0
Pink
130 x 16
16.7
6.0
Grey
130 x 20
20.9
6.0
Green
130 x 25
26.2
6.0
Purple
150 x 5
6.04
6.0
Orange
150 x 6
7.24
6.0
White
150 x 8
9.66
6.0
Red
150 x 10
12.1
6.0
Yellow
150 x 12
14.5
6.0
Pink
150 x 16
19.3
6.0
Grey
150 x 20
24.1
6.0
Green
150 x 25
30.1
6.0
Purple
150 x 50
60.4
6.0
Green
180 x 5
7.24
6.0
Orange
180 x 6
8.69
6.0
White
180 x 10
14.5
6.0
Yellow
180 x 12
17.4
6.0
Pink
180 x 16
23.2
6.0
Grey
180 x 20
29.0
6.0
Green
180 x 25
36.2
6.0
Purple
200 x 6
9.66
6.0
White
200 x 8
12.9
6.0
Red
200 x 10
16.1
6.0
Yellow
200 x 12
19.3
6.0
Pink
200 x 16
25.7
6.0
Grey
200 x 20
32.2
6.0
Green
200 x 25
40.3
6.0
Purple
250 x 6
12.1
6.0
White
250 x 8
16.1
6.0
Red
250 x 10
20.1
6.0
Yellow
250 x 12
24.1
6.0
Pink
250 x 16
32.2
6.0
Grey
250 x 20
40.2
6.0
Green
250 x 25
50.3
6.0
Purple
300 x 6
14.5
6.0
White
300 x 8
19.3
6.0
Red
300 x 10
24.1
6.0
Yellow
300 x 12
29.0
6.0
Pink
300 x 16
38.6
6.0
Grey
300 x 20
48.3
6.0
Green
300 x 25
60.4
6.0
Purple

 

Available Forms & Shapes
  • Hollow
  • Rod
  • Round Rod
  • Precision Ground Bars
  • Rings
  • Flat Bars
  • Channel Bars
  • T-Bars
  • Round
  • Square
  • Blocks
  • Rectangle
  • Threaded
  • Billet
  • Half Round Bars
  • I/H Bars
  • Triangle
  • Forging
  • Hex (A/F)
  • Profiles
  • Rectangular Bar
  • Ingot

 

Commercially Pure (Cp) Titanium Bar Condition
H&T Hardened and tempered.
ANN Annealed
PH Precipitation hardened.

 

Astm B348 Ti Alloy Hex Bar Size
hex bar Size in Inches
hex bar Wt per Ft
hex bar Wt per 12′
3/16″
0.104
1.248
1/4″
0.180
2.160
5/16″
0.290
3.480
3/8″
0.600
4.920
7/16″
0.560
6.72
1/2″
0.740
8.880
9/16″
0.930
11.16
5/8″
1.150
13.80
11/16″
1.390
16.68
3/4″
1.660
19.92
13/16″
1.950
23.40
7/8″
2.300
27.60
15/16″
2.600
31.20
1″
2.90
34.80
1-1/16″
3.30
39.60
1-1/8″
3.700
44.40
1-1/4″
4.600
55.20
1-5/16″
5.100
61.20
1-3/8″
5.600
67.20
1-7/16″
6.100
73.20
1-1/2″
6.600
79.20
1-5/8″
7.800
93.60
1-3/4″
9.030
108.36
1-7/8″
10.400
124.80
2″
11.80
141.60
2-1/4″
14.920
179.04
2-3/8″
16.920
203.04
2-1/2″
18.42
221.04
3″
26.53
318.36

 

Application Industries Of Titanium Rod
  • Gas Processing
  • Pharmaceuticals
  • Chemical Equipment
  • Petrochemicals
  • Specialty Chemicals
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Pharmaceutical Equipment

 

Titanium Square Bar Hardness
0.2% Proof Stress
Tensile Strength
Elongation
Reduction of area
Hardness
MPA
MPA
%
%
HRC
Min
Min
Min
Min
Min
827
1034
17
25
40

 

Related Specifications And Standard

Specifications:

ASME SB-348, ASTM F-67, AMS 4921

International Specifications:

W. NR. 3.7035, W. NR. 3.7034

 

Shortest delivery time in grade 9 titanium round bar, View updated Price in Mumbai, india

 

Pure Titanium Bar Value Added Services
  • Machining
  • SAW Cutting
  • Polishing

 

Equivalent Grade of pure titanium round bar
Grades UNS Grades UNS
CP Grade 1 R50350 CP Grade 2 R50400
CP Grade 3 R50550 CP Grade 4 R50700
Titanium Grade 6 R54520 CP Grade 7 R52400
Titanium Grade 9 R56320 CP Grade 11 R52252
CP Grade 12 R53400 CP Grade 16 R52402
CP Grade 17 R52252 CP Grade 26 R52404
CP Grade 27 R52404 Titanium Grade 28 R56323
Titanium Grade 29 R56404 Ti-10V-2Fe-3Al R56410
Ti-13V-11Cr-3Al3-8-6-44 R58010 Ti-2.5Cu
Ti-3Al-8V-6Cr-4Mo-4Zr Ti-4Al-4Mo-2Sn
Ti-5-2.5Sn ELI R54521 Ti-5.8Al-4.0Sn-3.5Zr-0.7Nb-0.5Mo-0.35Si-0.06C
Ti-5Al-1Sn-1Zr-1V-0.8Mo Ti-5Al-2Zr-2Sn-4Mo-4Cr R58650
Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.15Si R56222 Ti-6Al-2Sn-4Zr-2Mo R54620
Ti-6Al-2Sn-4Zr-6Mo R56260 Ti-6Al-4V R56400
Ti-6Al-4V ELI R56407 Ti-6Al-6V-2Sn R56620
Ti-6Al-7Nb R56700 Ti-7Al-4Mo R56740
Ti-8Al-1Mo-1V R54810 TIMETAL 21S

 

Titanium bar Chemical Properties
Grade C N O H Ti Fe
Gr 1 .08 Max .03 Max .18 Max .015 Max Bal .20 Max
Gr 4 .08 Max .05 Max .40 Max .015 Max Bal .50 Max
Gr 7 .08 Max .03 Max .25 Max .015 Max Bal .30 Max
Gr 9 .08 Max .03 Max .15 Max .015 Max - .25 Max
Gr 12 .08 Max .03 Max .25 Max 0.15 Max - .30 Max

 

Mechanical Properties of Titanium ASTM B348 Round Bar
Grade Tensisle Strength Yield Strength

Elogation In 2 In. Or 50mm Min.,%

Bend Test
Min Min Min Min Max Max

Under 0.070 In. (1.8mm) Thickness

0.070 To 0.187 In. (1.8mm To 4.75mm) Thickness

Ksi Mpa Ksi Mpa Ksi Mpa
1 35 240 20 138  45 310   24  1.5T 2T 
2 50 345 40 275  65 450  20   2T 2.5T 
3 65 450 55 380  80 550  18   2T 2.5T 
4 80 550 70 483  95 655  15   2.5T 3T 
5 130 895 120  828 ... ...  10  4.5T 5T 
7 50 345 40 275  65 450   20  2T 2.5T 
9 90 620 70 483  ...  ...   15  2.5T 3T 
12 70 483 50  345  ... ...   18  2T 2.5T 

 

titanium round bar for sale
ASTM B348 Ti Rectangular Bar Polished Titanium ASTM B348 Polished Round Bar
Titanium ASTM B348 Square Bar ASTM B348 Ti Alloy Polished Flat Bar
ASTM B348 Ti Threaded Bar M16 Titanium Threaded Rods
ASTM B348 Ti Alloy Rectangular Bar stock ASTM B348 Titanium Polished Bar Stock
Titanium ASTM B348 Rectangular Bar Cold Drawn ASTM B348 Titanium Polished Square Bar
ASTM B348 Ti Alloy Square Bar Black Titanium ASTM B348 Black Bar
ASTM B348 Square Bar Annealed Titanium Bright Bar Flat
Ti Rectangular Bar Black ASTM B348 Bright Bar Hex
6al-4v titanium round bar grade 4 titanium round bar
10mm titanium round bar pure titanium round bar
titanium grade 12 round bar grade 9 titanium round bar
7mm titanium round bar 8mm titanium round bar
Titanium Square Bar Bright ASTM B348 Titanium Bright Bar Cold Drawn

 

titanium round bar diameter tolerance
Tolerances for Cold Drawn Titanium Round Bar
Shape / Section Size, diameter or width across flats Permitted variation
mm mm
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
+ 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
Flat (thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.250
+ 0 to - 0.350
Flat (width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.190
+ 0 to - 0.220
+ 0 to - 0.350
+ 0 to - 1.00
+ 1.00 to - 1.00
Square and
hexagon
≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105
+ 0 to - 0.090
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.250

Tolerances of Turned ASTM B348 Titanium Round Bar (BS 970-3)

Turned Titanium round bar Tolerances
Titanium round bar Size, diameter Permitted variation
mm mm
≧ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 120
> 120 ≦ 180
> 180 ≦ 250
> 250 ≦ 315
> 315 ≦ 400
> 400
+ 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
+ 0 to - 0.160
+ 0 to - 0.185
+ 0 to - 0.210
+ 0 to - 0.230
+ 0 to - 0.250

 

Tolerances of Precision Titanium ASTM B348 Round Bar (BS 970-3)

PrecisionTitanium ASTM B348 Round Bar Tolerances
Section Size,
diameter
Permitted overall variation
Class A Class B Class C
mm mm mm mm
Round ≧ 6 <75 0.05 0.025 0.013

 

Tolerance of Titanium Alloy Bright Round Bar (BS EN ISO 286-2 )

Titanium round bar Tolerance ISO “H” Series in MM
NOMINAL SIZE h5 h6 h7 h8 h9 H10 H11 h12
DIAMETER mm
~ to 3 +0.004/0 +0.006/0 +0.01/0 +0.014/0 +0.025/0 +0.04/0 +0.06/0 +0.1/0
over 3 to 6 +0.005/0 +0.008/0 +0.012/0 +0.018/0 +0.03/0 +0.048/0 +0.075/0 +0.12/0
over 6 to 10 +0.006/0 +0.009/0 +0.015/0 +0.022/0 +0.036/0 +0.058/0 +0.09/0 +0.15/0
over 10 to 18 +0.008/0 +0.011/0 +0.018/0 +0.027/0 +0.043/0 +0.07/0 +0.11/0 +0.18/0
over 18 to 30 +0.009/0 +0.013/0 +0.021/0 +0.033/0 +0.052/0 +0.084/0 +0.13/0 +0.21/0
over 30 to 50 +0.011/0 +0.016/0 +0.025/0 +0.039/0 +0.062/0 +0.1/0 +0.16/0 +0.25/0
over 50 to 80 +0.013/0 +0.019/0 +0.03/0 +0.046/0 +0.074/0 +0.12/0 +0.19/0 +0.3/0
over 80 to 120 +0.015/0 +0.022/0 +0.035/0 +0.054/0 +0.087/0 +0.14/0 +0.22/0 +0.35/0
over 120 to 180 +0.018/0 +0.025/0 +0.04/0 +0.063/0 +0.1/0 +0.16/0 +0.25/0 +0.4/0
over 180 to 250 +0.02/0 +0.029/0 +0.046/0 +0.072/0 +0.115/0 +0.185/0 +0.29/0 +0.46/0

 

ASTM B348 Ti Alloy Round Bar Length
  • Metric system: standard length is 9 - 12 metres
  • USA : 40 feet