Materials such as stainless steel, alloy steel, carbon steel, copper-nickel, Inconel, etc are suitable in the manufacture of eye bolts. However, the purchase of said bolts must be carried out with the inputs of Forged Eye Bolts Manufacturers In India. There are several reasons for selecting or understanding the suitability of bolts. Since the Eye Bolt Manufacturer In India understands the properties of the materials he uses in their construction, he would be able to suggest the most suitable kind of fastener for the application.
Because there are several aspects to choosing a bolt, it is important to choose a reputed Lifting Eye Bolt Manufacturer In India in order to purchase good quality fasters. Shaped in the form of an eye, Eye Bolt Manufacturer In Mumbai produces these bolts in a loop at one end, with a threaded rod in the other end. It is not uncommon to see the Eye Bolts Are Used For masonry purposes. Hence, these fasteners are suited to be used across various masonry materials including concrete block, marble, granite, limestone, cast stone, glass block, and adobe. Although fully threaded, collared bolts may be used for angular loads up to 45°, using a non shouldered Eyebolts For Lifting angular loads is not recommended.
Compare Stainless Steel Flange Bolts price with SS Carriage Bolts price list
standard | ISO 10642 |
---|---|
British standards | BS 57 |
Size |
M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes |
Length | 3 mm to 200 mm |
Stainless Steel Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Standard: |
DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards |
DIN Standard | B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985 |
UTS – Unified Thread Standard | UNC, UNF, UNEF, UNS, NPT, NPTF |
Dimensions | ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded. |
Tolerance | +/-0.01mm to +/-0.05mm |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Type | Pan/ Round/ Oval/ Hex Head/ Truss head |
Head | Pan head, flat head, oval head, hex head, phillips head |
Finishing: | Zinc (yellow, white, blue, black), black oxide Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET |
Finish | Per ASTM A380/A380M |
Production process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing |
Surface treatment |
|
Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc. |
MOQ | 5 pieces |
Test Certificate: |
|
Free Samples | Yes |
Delivery time | Regular product is about 7-15 days, custom product will according to special requirement |
Payment Terms | T/T, Paypal, Western Union, L/C or Trade Assurance 30% deposit & balance before shipping |
Uses & application | Railway, Wind tower, Nuclear power, Automotive industry, Construction, Electronic industry |
Description | Per Unit (INR) | Price in USD | Price in EURO |
---|---|---|---|
Forged Components - Eye Bolts For Channel Cover Forging (Sa 336m Gr F22 Cl.3) (Qty: 3 Nos.) | 249 | 3.37 | 2.77 |
Lifting Eye Bolts (Din 580-m10-st) | 64 | 0.87 | 0.71 |
Lifting Eye Bolt-2028087 | 225 | 3.05 | 2.50 |
Eye Bolt- 0991519845 (Qty 50 Pcs) | 3,451 | 46.77 | 38.36 |
P-no:8973598180 Qty:30pcs Production Parts:bolt;eye,a Type (Isuzu Brand Automotive Parts) | 1,127 | 15.27 | 12.53 |
Lifting Eye Bolt-2028088 | 435 | 5.90 | 4.84 |
Eye Bolt 120x20mm (Steel)(Scaffold Trailer With Parts) | 58 | 0.79 | 0.64 |
Eye Bolt_din00444 B M8x60-4.6 | 37 | 0.50 | 0.41 |
Size |
Weight in kgper piece |
---|---|
M8 |
0.05 |
M10 |
0.09 |
M12 |
0.16 |
M16 |
0.24 |
M20 |
0.36 |
M24 |
0.72 |
M30 |
1.32 |
M36 |
2.08 |
M42 |
3.11 |
M48 |
5.02 |
M56 |
6.69 |
M64 |
9.30 |
M72 |
18.5 |
M80 |
27.3 |
M100 |
36.4 |
Size (A x Pitch x B) |
Outside Eye Diameter (C) (mm) |
Inside Eye Diameter (D) (mm) |
Overall Length (E) (mm) |
Shoulder Diameter (H) (mm) |
Shoulder Thickness (G) (mm) |
||
---|---|---|---|---|---|---|---|
6mm x 1.0 | x | 12mm | 30 | 19 | 50.9 | 13.5 | 4 |
6mm x 1.0 | x | 25.4mm | 30 | 19 | 64.3 | 13.5 | 4 |
7mm x 1.0 | x | 14mm | 36.5 | 22 | 60.9 | 15.1 | 4 |
7mm x 1.0 | x | 28.5mm | 36.5 | 22 | 75.4 | 15.1 | 4 |
8mm x 1.25 | x | 16mm | 43 | 25 | 72.4 | 16.7 | 4 |
8mm x 1.25 | x | 31.7mm | 43 | 25 | 88.1 | 16.7 | 4 |
10mm x 1.5 | x | 20mm | 46 | 27 | 81 | 19.8 | 4 |
10mm x 1.5 | x | 35mm | 46 | 27 | 96 | 19.8 | 4 |
12mm x 1.75 | x | 24mm | 54 | 30 | 92.4 | 23 | 4 |
12mm x 1.75 | x | 38mm | 54 | 30 | 106.4 | 23 | 4 |
14mm x 2.0 | x | 28mm | 58 | 33 | 99.4 | 24.6 | 5.6 |
14mm x 2.0 | x | 44.5mm | 58 | 33 | 115.9 | 24.6 | 5.6 |
16mm x 2.0 | x | 32mm | 65 | 35 | 112.9 | 26.2 | 5.6 |
16mm x 2.0 | x | 44.5mm | 65 | 35 | 125.4 | 26.2 | 5.6 |
18mm x 2.5 | x | 36mm | 71.5 | 38 | 124.7 | 30.2 | 5.6 |
18mm x 2.5 | x | 51mm | 71.5 | 38 | 139.7 | 30.2 | 5.6 |
20mm x 2.5 | x | 40mm | 81 | 41 | 140.2 | 34.9 | 6.4 |
20mm x 2.5 | x | 57mm | 81 | 41 | 157.2 | 34.9 | 6.4 |
22mm x 2.5 | x | 44mm | 90.4 | 46 | 155.1 | 39.7 | 7.1 |
22mm x 2.5 | x | 63.5mm | 90.4 | 46 | 174.6 | 39.7 | 7.1 |
24mm x 3.0 | x | 48mm | 90.4 | 46 | 159.1 | 39.7 | 7.1 |
24mm x 3.0 | x | 63.5mm | 90.4 | 46 | 174.6 | 39.7 | 7.1 |
27mm x 3.0 | x | 48mm | 103 | 51 | 174.9 | 44.5 | 7.1 |
27mm x 3.0 | x | 70mm | 103 | 51 | 196.9 | 44.5 | 7.1 |
30mm x 3.5 | x | 60mm | 112.7 | 55 | 198.3 | 49.2 | 7.1 |
30mm x 3.5 | x | 76mm | 112.7 | 55 | 214.3 | 49.2 | 7.1 |
36mm x 4.0 | x | 72mm | 131.8 | 63 | 229.9 | 55.6 | 7.1 |
36mm x 4.0 | x | 89mm | 131.8 | 63 | 246.9 | 55.6 | 7.1 |
42mm x 4.5 | x | 84mm | 152.4 | 73 | 271.6 | 65.1 | 8.7 |
42mm x 4.5 | x | 95mm | 152.4 | 73 | 282.6 | 65.1 | 8.7 |
45mm x 4.5 | x | 84mm | 152.4 | 73 | 271.6 | 65.1 | 10.3 |
45mm x 4.5 | x | 95mm | 152.4 | 73 | 282.6 | 65.1 | 10.3 |
48mm x 5.0 | x | 96mm | 174.6 | 82 | 294.8 | 74.6 | 11.9 |
48mm x 5.0 | x | 101.6mm | 174.6 | 82 | 310.4 | 74.6 | 11.9 |
Size |
Weight in kgper piece |
---|---|
M8 |
0.06 |
M10 |
0.11 |
M12 |
0.18 |
M16 |
0.28 |
M20 |
0.45 |
M24 |
0.74 |
M30 |
1.66 |
M36 |
2.65 |
M42 |
4.03 |
M48 |
6.38 |
M56 |
8.80 |
M64 |
12.4 |
M72 |
23.3 |
M80 |
34.2 |
M100 |
49.1 |
|
|
Size |
Weight in kgper piece |
---|---|
M8 |
0.06 |
M10 |
0.11 |
M12 |
0.18 |
M16 |
0.28 |
M20 |
0.45 |
M24 |
0.74 |
M30 |
1.66 |
M36 |
2.65 |
M42 |
4.03 |
M48 |
6.38 |
M56 |
8.80 |
M64 |
12.4 |
M72 |
23.3 |
M80 |
34.2 |
M100 |
49.1 |
RESULTS | ||
Parameter | Value | |
Nominal Size | 1/4 | - |
Thread Size | 1/4 - 20 | |
Eye Bolt Type | Shoulder Pattern Eye Bolts | |
Breaking Strength, min | 2100 | lbf |
Proof Load, min | 800 | |
Rated Capacity @ 0 deg. | 400 | |
Rated Capacity @ 30 deg. | 75 | |
Rated Capacity @ 60 deg. | NR | |
Rated Capacity @ 90 deg. | NR |
Note : Proof load is calculated as 2 times the rated capacity in straight pull (0 degrees).
Note : NR - Not Recommended
Safe Working Load |
Diameter Thread |
Diameter Base |
Diameter Eye Outside |
Diameter Eye Inside |
Thickness Collar |
Height |
Thread Length |
Weight Each |
---|---|---|---|---|---|---|---|---|
Tonnes |
a (mm) |
b (mm) |
c (mm) |
e (mm) |
f (mm) |
g (mm) |
h (mm) |
kg |
0.25 |
10 |
22 |
33 |
15 |
7 |
36 |
178 |
0.18 |
0.40 |
12 |
28 |
41 |
19 |
11 |
45 |
178 |
0.25 |
0.50 |
14 |
36 |
52 |
24 |
14 |
58 |
178 |
0.40 |
0.80 |
16 |
36 |
52 |
24 |
14 |
58 |
178 |
0.44 |
1.00 |
18 |
43 |
62 |
29 |
17 |
69 |
178 |
0.70 |
1.60 |
20 |
43 |
62 |
29 |
17 |
69 |
178 |
0.70 |
2.50 |
24 |
57 |
82 |
38 |
19 |
87 |
178 |
1.50 |
4.00 |
30 |
71 |
104 |
48 |
24 |
116 |
178 |
2.80 |
Material |
Threads | Surface Finish |
---|---|---|
|
|
|
ISO – International Organization for Standardization | ISO 4032, ISO 4033, ISO 4017, ISO7380 JIS standards |
---|---|
British standards | BS6105 (old: BSENISO 3506) which covers Part 1 bolts, screw and Us, part 2 nuts and part 4 tapping screws. |
DIN Standard | B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985 |
Length (B) |
Outside Eye Diameter (C) |
Inside Eye Diameter (D) |
Overall Length* (E) |
Thread Length* (F) |
---|---|---|---|---|
1/4″-20 (A) |
||||
2″ |
1″ |
1/2″ |
3-7/32″ |
1-1/2″ |
3″ |
1″ |
1/2″ |
4-7/32″ |
1-1/2″ |
4″ |
1″ |
1/2″ |
5-7/32″ |
2″ |
5″ |
1″ |
1/2″ |
6-7/32″ |
2-1/2″ |
6″ |
1″ |
1/2″ |
7-7/32″ |
3″ |
5/16″-18 (A) |
||||
2-1/4″ |
1-1/4″ |
5/8″ |
3-23/32″ |
1-1/2″ |
3-1/4″ |
1-1/4″ |
5/8″ |
4-23/32″ |
1-1/2″ |
4-1/4″ |
1-1/4″ |
5/8″ |
5-23/32″ |
2-1/2″ |
5″ |
1-1/4″ |
5/8″ |
6-15/32″ |
2-1/2″ |
6″ |
1-1/4″ |
5/8″ |
7-15/32″ |
3″ |
3/8″-16 (A) |
||||
2-1/2″ |
1-1/2″ |
3/4″ |
4-1/4″ |
1-1/2″ |
3″ |
1-1/2″ |
3/4″ |
4-3/4″ |
1-1/2″ |
4″ |
1-1/2″ |
3/4″ |
5-3/4″ |
2″ |
4-1/4″ |
1-1/2″ |
3/4″ |
6″ |
2″ |
4-1/2″ |
1-1/2″ |
3/4″ |
6-1/4″ |
3″ |
5″ |
1-1/2″ |
3/4″ |
6-3/4″ |
3″ |
6″ |
1-1/2″ |
3/4″ |
7-3/4″ |
3″ |
8″ |
1-1/2″ |
3/4″ |
9-3/4″ |
4″ |
10″ |
1-1/2″ |
3/4″ |
11-3/4″ |
4″ |
1/2″-13 (A) |
||||
2″ |
2″ |
1″ |
4-3/16″ |
1-5/8″ |
3-1/4″ |
2″ |
1″ |
5-7/16″ |
2″ |
4″ |
2″ |
1″ |
6-3/16″ |
3″ |
4-1/2″ |
2″ |
1″ |
6-11/16″ |
3″ |
6″ |
2″ |
1″ |
8-3/16″ |
3″ |
8″ |
2″ |
1″ |
10-3/16″ |
4″ |
10″ |
2″ |
1″ |
12-3/16″ |
4″ |
12″ |
2″ |
1″ |
14-3/16″ |
4″ |
5/8″-11 (A) |
||||
4″ |
2-1/2″ |
1-3/8″ |
6-5/8″ |
3″ |
4-1/2″ |
2-1/2″ |
1-3/8″ |
7-1/8″ |
3″ |
6″ |
2-1/2″ |
1-3/8″ |
8-5/8″ |
3″ |
8″ |
2-1/2″ |
1-3/8″ |
10-5/8″ |
4″ |
10″ |
2-1/2″ |
1-3/8″ |
12-5/8″ |
4″ |
12″ |
2-1/2″ |
1-3/8″ |
14-5/8″ |
4″ |
15″ |
2-1/2″ |
1-3/8″ |
17-5/8″ |
6″ |
18″ |
2-1/2″ |
1-3/8″ |
20-5/8″ |
6″ |
24″ |
2-1/2″ |
1-3/8″ |
26-5/8″ |
6″ |
3/4″-10 (A) |
||||
4″ |
2-13/16″ |
1-1/2″ |
6-7/8″ |
3″ |
4-1/2″ |
2-13/16″ |
1-1/2″ |
7-3/8″ |
3″ |
6″ |
2-13/16″ |
1-1/2″ |
8-7/8″ |
3″ |
8″ |
2-13/16″ |
1-1/2″ |
10-7/8″ |
4″ |
10″ |
2-13/16″ |
1-1/2″ |
12-7/8″ |
4″ |
12″ |
2-13/16″ |
1-1/2″ |
14-7/8″ |
4″ |
15″ |
2-13/16″ |
1-1/2″ |
17-7/8″ |
6″ |
18″ |
2-13/16″ |
1-1/2″ |
20-7/8″ |
6″ |
24″ |
2-13/16″ |
1-1/2″ |
26-7/8″ |
6″ |
7/8″-9 (A) |
||||
5″ |
3-1/2″ |
1-3/4″ |
8-1/4″ |
3″ |
6″ |
3-1/2″ |
1-3/4″ |
9-1/4″ |
3″ |
8″ |
3-1/2″ |
1-3/4″ |
11-1/4″ |
4″ |
10″ |
3-1/2″ |
1-3/4″ |
13-1/4″ |
4″ |
12″ |
3-1/2″ |
1-3/4″ |
15-1/4″ |
4″ |
18″ |
3-1/2″ |
1-3/4″ |
21-1/4″ |
6″ |
24″ |
3-1/2″ |
1-3/4″ |
27-1/4″ |
6″ |
1″-8 (A) |
||||
6″ |
4″ |
2″ |
9-5/8″ |
3″ |
8″ |
4″ |
2″ |
11-5/8″ |
4″ |
10″ |
4″ |
2″ |
13-5/8″ |
4″ |
12″ |
4″ |
2″ |
15-5/8″ |
4″ |
15″ |
4″ |
2″ |
18-5/8″ |
6″ |
18″ |
4″ |
2″ |
21-5/8″ |
6″ |
24″ |
4″ |
2″ |
27-5/8″ |
6″ |
1-1/4″-7 (A) |
||||
6″ |
4-7/16″ |
2-3/16″ |
10-1/2″ |
3″ |
8″ |
4-7/16″ |
2-3/16″ |
12-1/2″ |
4″ |
12″ |
4-7/16″ |
2-3/16″ |
16-1/2″ |
4″ |
18″ |
4-7/16″ |
2-3/16″ |
22-1/2″ |
6″ |
24″ |
4-7/16″ |
2-3/16″ |
28-1/2″ |
6″ |
1-1/2″-6 (A) |
||||
6″ |
5-3/16″ |
2-1/2″ |
11-1/4″ |
3″ |
12″ |
5-3/16″ |
2-1/2″ |
17-1/4″ |
4″ |
18″ |
5-3/16″ |
2-1/2″ |
23-1/4″ |
6″ |
24″ |
5-3/16″ |
2-1/2″ |
29-1/4″ |
6″ |
2″-4-1/2 (A) |
||||
12″ |
6-7/8″ |
3-1/4″ |
19″ |
4″ |
* Overall length and thread length for imported eye bolts are approximate. Their values may differ from those listed in this table. |
|
|
d1 | h | b | d2 | d3 | d4 | k |
---|---|---|---|---|---|---|
M6 | 27.5 | 12 | 27 | 19 | 14 | 6.5 |
M8 | 36 | 13 | 36 | 20 | 20 | 8 |
M10 | 45 | 17 | 45 | 25 | 25 | 10 |
M12 | 53 | 20.5 | 54 | 30 | 30 | 12 |
M14 | 62 | 27 | 63 | 35 | 35 | 14 |
M16 | 62 | 27 | 63 | 35 | 35 | 14 |
M20 | 71 | 30 | 72 | 40 | 40 | 16 |
M22 | 90 | 36 | 90 | 50 | 50 | 20 |
M24 | 90 | 36 | 90 | 50 | 50 | 20 |
M27 | 109 | 45 | 108 | 65 | 60 | 24 |
M30 | 109 | 45 | 108 | 65 | 60 | 24 |
M33 | 128 | 54 | 126 | 75 | 70 | 28 |
M36 | 128 | 54 | 126 | 75 | 70 | 28 |
M42 | 147 | 63 | 144 | 85 | 80 | 32 |
M45 | 168 | 68 | 166 | 100 | 90 | 38 |
M48 | 168 | 68 | 166 | 100 | 90 | 38 |
M52 | 187 | 78 | 184 | 110 | 100 | 42 |
M56 | 187 | 78 | 184 | 110 | 100 | 42 |
M64 | 208 | 90 | 206 | 120 | 110 | 48 |
M72 | 260 | 100 | 260 | 150 | 140 | 60 |
M80 | 298 | 112 | 296 | 170 | 160 | 68 |
M100 | 330 | 130 | 330 | 190 | 180 | 75 |
M6 | 70 | 50 |
M8 | 140 | 95 |
M10 | 230 | 170 |
M12 | 340 | 240 |
M14 | 490 | 340 |
M16 | 700 | 500 |
M20 | 1200 | 830 |
M22 | 1500 | 1050 |
M24 | 1800 | 1270 |
M27 | 2500 | 1650 |
M30 | 3600 | 2600 |
M33 | 4300 | 3200 |
M36 | 5100 | 3700 |
M42 | 7000 | 5000 |
M45 | 8000 | 5500 |
M48 | 8600 | 6100 |
M52 | 9900 | 7300 |
M56 | 11500 | 8300 |
M64 | 16000 | 11000 |
M72 | 21000 | 15000 |
M80 | 28000 | 20000 |
M100 | 38000 | 27000 |
Material
|
Standards
|
Grades
|
---|---|---|
Nickel Alloy |
ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
|
UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
|
Stainless Steel
|
ASTM / ASME A/SA 193 / 194
|
B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4
|
Alloy Steel
|
ASTM / ASME A/SA 193 / 194 GR
|
B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M
|
Duplex Steel
|
UNS NO. S 31803, S 32205
|
Range: M10 TO M100, LENGTH UPTO 5 METERS
|
Nonmetallic Materials:
|
Acrylic, Kel-F, Lexan, Polypropylene, Poly Vinyl Chloride, Teflon, Zytel 31, 101, 105 | |
High-Temp Alloys
|
Discaloy, 19-9 DL, 16-25-6, A286, Titanium, Nimonic 80, Mulitmet, Haynes 25, Greek Ascalloy, Unitemp 252, Udimet 500, Rene 41, Inco 700, Inco 901, Hastelloy X, 235, Waspaloy, RA 330 | |
Copper Base Alloys
|
Copper, Brasses: Yellow, Free-cut, Red, Naval, Bronze: Commercial, Phosphor, Silicon A & B, Aluminum, Silicon-Aluminum, Manganese, Ampco Alloys, Munitz Metal, Cupro-Nicles | |
Aluminum Alloys:
|
1100, 2011, 2014, 2017, 2024, 3003, 5052, 6053, 6061, 7075 | |
Trademarks:
|
Carpenter, Armco, INCO, Cabot, DuPont. | |
Finish:
|
Black Oxide, Zinc Plating, Hot Dip Galvanized |