Incoloy alloys belong to the family of Inconel. This means that the alloy could be used at elevated temperatures. At elevated temperatures, the problem associated with some grades of stainless steel is oxidation. The chemical composition of Incoloy 800 Fasteners permits their use at elevated temperatures. The higher the level of carbon, the better is their chance for withstanding elevated temperatures. Hence, manufacturers produce derivative alloys of UNS N08800 Bolts, which are known as Alloy 800H & Alloy 800HT, both of which have slight differences in their chemical composition.
For instance, the chemistry of Alloy 800HT Bolts and Nuts contains a combined addition of 1.20% of aluminum and titanium, thus guaranteeing optimum performance at elevated temperatures. Therefore the use of ASTM B408 UNS N08811 Threaded Rod is a good fit for structural properties. The controlled chemical composition of the alloy permits the use of Nickel Alloy 800H Hex Bolt at a temperature as high as 1200 -1600° F, without any disastrous effects.
At such a temperature elevation, conventional stainless steels like grade 304 would disfigure, unlike the UNS N08810 Screws, whose impact resistance and other mechanical properties remain excellent. Not forgetting their creep resistance properties, which in the case of DIN 1.4876 Stud Bolts is far superior to any other traditionally used alloy.
Check Comparision of Incoloy 800 Fasteners price with inconel 600 Fasteners price list
Standard | IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards |
---|---|
Threads: | BSF, UNF METRIC, UNC, BSW or as required |
Standard | ANSI – American National Standards Institute
DIN:DIN 933, DIN 931, DIN 970, DIN 934 UTS – Unified Thread Standard : UNF, NPT, NPTF, UNS, UNC, UNEF ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards |
Fasteners/ Bolts Size | M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160 |
Length | 3 mm to 200 mm |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe etc |
Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Finishing | Zinc white, (yellow, black, blue), black oxide,
Dacroment, Geometry, plated zinc-nickel, anodizing, nickel plated, Stainless steel: Passivated Self-Colour, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, Stainless Steel, some special one like DACROMET and Mechanically Applied coating |
raw materials of Source | JSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc. |
Form | Square, Hex, Threading as per Gauge, Round Etc. |
Process of Production | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
Surface Coating |
|
Packing | IN BULK: pallet, canton, carton / Small Boxs / pallet or customer request |
Description | Per Unit (INR) | Price in USD | Price in EURO |
---|---|---|---|
Incoloy 800ht Stud Bolt To Astm B 564 Gr. Uns No.8811, Nace Mr-0175. Size: M 30x 3.5 Pitch X 343 Mm Long | 7,690 | 104.24 | 87.40 |
Incoloy 800ht Stud Bolts In Gr. Uns No.8811 Nace Mr-0175., Sz. M 30 X 3.5mm Pitch X 270mm Long | 5,202 | 70.51 | 59.12 |
Incoloy 800ht Stud Bolts In Gr. Uns No.8811 Nace Mr-0175., Sz. M30 X 3.5 Mm Pitch X 343 Mm Long | 6,440 | 87.29 | 73.19 |
66a-nuts/bolts/screws/washer Made Of Alloysteel Including Stainless Steel-incoloy 800h Studbolt 1 1/4 Inch X 235 Mm Long | 3,207 | 43.47 | 36.45 |
66a-nuts/bolts/screws/washer Made Of Alloysteel Including Stainless Steel-incoloy 800h Heavy Hex Nut 1-1/4 Inch -8 Un (2 | 1,685 | 22.84 | 19.15 |
66a-nuts/bolts/screws/washer Made Of Alloysteel Including Stainless Steel-incoloy 800h Studbolt 1 1/4 Inch X 265 Mm Long | 3,478 | 47.14 | 39.53 |
APPROX. WEIGHT IN KGS FOR 100 NOS |
|||||||||||
SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
M-3 | 0.01 | 0.01 | |||||||||
M-4 | 0.02 | 0.02 | |||||||||
M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
M-14 | 0.82 | 0.60 | 0.38 | ||||||||
M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
M-18 | 1.27 | 0.97 | 0.66 | ||||||||
M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
M-52 | 31.90 | 33.00 | 18.20 | ||||||||
M-56 | 47.90 | 19.30 | |||||||||
M-60 | 51.60 | 20.30 | |||||||||
M-64 | 55.40 | 21.80 | |||||||||
M-68 | 57.40 | ||||||||||
M-72 | 63.40 | 24.00 |
MM THREADS AS PER IS 1363/67 | ||||||||||
APPROXIMATE WEIGHT IN KGS FOR 100 NOS | ||||||||||
LENGTH | DIAMETER | |||||||||
M 5 | M 6 | M 8 | M 10 | M 12 | M 14 | M 16 | M 18 | M 20 | M 22 | |
16 | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
20 | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
25 | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
30 | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
35 | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
40 | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
45 | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
50 | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
55 | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
60 | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
65 | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
70 | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
75 | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
80 | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
90 | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
100 | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
110 | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
120 | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
130 | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
140 | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
150 | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
160 | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
170 | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
180 | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
190 | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
200 | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
220 | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
240 | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
250 | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
260 | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
280 | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
300 | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
320 | 31.646 | 56.818 | 92.593 | |||||||
340 | 33.557 | 60.241 | 98.039 | |||||||
360 | 35.211 | 63.291 | 104.167 | |||||||
380 | 37.037 | 66.667 | 108.696 | |||||||
400 | 39.063 | 69.444 | 113.636 |
Sizes | A | B | C | Weight (lbs.) Per 100 Pieces |
Inside Diameter | Outside Diameter | Thickness | ||
1/2 | 9/16 | 13/8 | 0.109 | 4 |
5/8 | 11/16 | 13/4 | 0.134 | 8 |
3/4 | 13/16 | 2 | 0.148 | 11 |
7/8 | 15/16 | 21/4 | 0.165 | 15 |
1 | 11/16 | 21/2 | 0.165 | 19 |
11/8 | 11/4 | 23/4 | 0.165 | 22 |
11/4 | 13/8 | 3 | 0.165 | 26 |
13/8 | 11/2 | 31/4 | 0.180 | 33 |
11/2 | 15/8 | 31/2 | 0.180 | 38 |
15/8 | 13/4 | 33/4 | 0.180 | 43 |
13/4 | 17/8 | 4 | 0.180 | 50 |
17/8 | 2 | 41/4 | 0.180 | 57 |
2 | 21/8 | 41/2 | 0.180 | 63 |
21/4 | 23/8 | 43/4 | 0.220 | 83 |
21/2 | 25/8 | 5 | 0.238 | 96 |
23/4 | 27/8 | 51/4 | 0.259 | 110 |
3 | 31/8 | 51/2 | 0.284 | 130 |
Flange Size |
B16.5 Class 150 RF/ Ring Gaskets |
B16.5 Class 150 FF/ Full Face Gaskets |
||||||||
---|---|---|---|---|---|---|---|---|---|---|
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
|||||||
1st |
2nd |
Final |
Dwg/No. |
Bolt Size |
1st |
2nd |
Final |
Dwg*/No. |
Bolt Size |
|
1/2 |
10 |
20 |
30 |
4-bolt |
1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
3/4 |
13 |
27 |
40 |
4-bolt |
1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
1 |
15 |
30 |
50 |
4-bolt |
1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
1-1/4 |
20 |
40 |
60 |
4-bolt |
1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
1-1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
2 |
40 |
80 |
120 |
4-bolt |
5/8 |
40 |
80 |
120 |
4-bolt |
5/8 |
2-1/2 |
40 |
80 |
120 |
4-bolt |
5/8 |
40 |
80 |
120 |
4-bolt |
5/8 |
3 |
40 |
80 |
120 |
4-bolt |
5/8 |
40 |
80 |
120 |
4-bolt |
5/8 |
3-1/2 |
40 |
80 |
120 |
8-bolt |
5/8 |
40 |
80 |
120 |
8-bolt |
5/8 |
4 |
40 |
80 |
120 |
8-bolt |
5/8 |
40 |
80 |
120 |
8-bolt |
5/8 |
5 |
60 |
120 |
200 |
8-bolt |
3/4 |
60 |
120 |
200 |
8-bolt |
3/4 |
6 |
60 |
120 |
200 |
8-bolt |
3/4 |
60 |
120 |
200 |
8-bolt |
3/4 |
8 |
60 |
120 |
200 |
8-bolt |
3/4 |
60 |
120 |
200 |
8-bolt |
3/4 |
10 |
95 |
190 |
320 |
12-bolt |
7/8 |
95 |
190 |
320 |
12-bolt |
7/8 |
12 |
95 |
190 |
320 |
12-bolt |
7/8 |
95 |
190 |
320 |
12-bolt |
7/8 |
14 |
147 |
294 |
490 |
12-bolt |
1 |
147 |
294 |
490 |
12-bolt |
1 |
16 |
147 |
294 |
490 |
16-bolt |
1 |
147 |
294 |
490 |
16-bolt |
1 |
18 |
213 |
426 |
710 |
16-bolt |
1-1/8 |
213 |
426 |
710 |
16-bolt |
1-1/8 |
20 |
213 |
426 |
710 |
20-bolt |
1-1/8 |
213 |
426 |
710 |
20-bolt |
1-1/8 |
24 |
300 |
600 |
1,000 |
20-bolt |
1-1/4 |
300 |
600 |
1,000 |
20-bolt |
1-1/4 |
Grade | C | Mn | Si | Fe | S | Cr | Al-Ti | Ni | |
Incoloy 800 Fasteners | min. | – | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
Incoloy 800H Fasteners | min. | 0.05 | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
Incoloy 800HT Fasteners | min. | 0.06 | – | – | 39.5 | – | 19.0 | 0.85/0.25 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 1.20/0.60 | 35.0 |
Incoloy Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
Incoloy 800-H-HT Fasteners | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa –205 | 30 | – | – |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
Incoloy 800 Fasteners | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
Incoloy 800H Fasteners | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
Incoloy 800HT Fasteners | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
Size | Finished Hex | Heavy Hex | Finished Jam | Heavy Hex Jam | Square | Heavy Square |
1⁄2“ Nut | 3.75 | 6.54 | 2.62 | 4.00 | 5.78 | 7.87 |
5⁄8“ Nut | 7.33 | 11.9 | 4.93 | 6.96 | 10.8 | 14.3 |
3⁄4“ Nut | 11.9 | 19.3 | 7.70 | 11.0 | 15.4 | 23.5 |
7⁄8“ Nut | 19.0 | 29.7 | 12.0 | 16.7 | 24.5 | 36.2 |
1″ Nut | 28.3 | 42.5 | 17.6 | 23.5 | 36.3 | 51.5 |
11⁄8“ Nut | 40.3 | 59.2 | 24.7 | 32.4 | 52.5 | 72.4 |
11⁄4“ Nut | 54.3 | 78.6 | 36.1 | 45.8 | 70.6 | 95.5 |
13⁄8“ Nut | 73.0 | 102 | 47.9 | 59.3 | 94.5 | 125.0 |
11⁄2“ Nut | 94.3 | 131 | 60.9 | 74.8 | 122 | 161 |
15⁄8“ Nut | 162 | 91.6 | ||||
13⁄4“ Nut | 151 | 204 | 100 | 114 | ||
17⁄8“ Nut | 241 | 134 | ||||
2″ Nut | 224 | 299 | 140 | 165 | ||
21⁄4“ Nut | 419 | 227 | ||||
21⁄2“ Nut | 564 | 332 | ||||
23⁄4“ Nut | 738 | 429 | ||||
3″ Nut | 950 | 545 | ||||
31⁄4“ Nut | 1194 | 651 | ||||
31⁄2“ Nut | 1526 | 851 | ||||
33⁄4“ Nut | 1812 | 1005 | ||||
4″ Nut | 2180 | 1200 |
MM THREADS AS PER IS 1363/67 |
||||||||||
---|---|---|---|---|---|---|---|---|---|---|
APPROXIMATE WEIGHT IN KGS FOR 100 NOS |
||||||||||
LENGTH |
D I A M E T E R |
|||||||||
M 5 |
M 6 |
M 8 |
M 10 |
M 12 |
M 14 |
M 16 |
M 18 |
M 20 |
M 22 |
|
16 | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
20 | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
25 | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
30 | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
35 | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
40 | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
45 | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
50 | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
55 | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
60 | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
65 | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
70 | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
75 | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
80 | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
90 | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
100 | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
110 | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
120 | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
130 | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
140 | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
150 | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
160 | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
170 | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
180 | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
190 | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
200 | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
220 | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
240 | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
250 | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
260 | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
280 | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
300 | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
320 | 31.646 | 56.818 | 92.593 | |||||||
340 | 33.557 | 60.241 | 98.039 | |||||||
360 | 35.211 | 63.291 | 104.167 | |||||||
380 | 37.037 | 66.667 | 108.696 | |||||||
400 | 39.063 | 69.444 | 113.636 |
|
|