Monel alloys are based on nickel and copper. Compared to most stainless steel alloy grades, the cost of monel nuts and bolts is much more expensive. Hence, the use of any component of this alloy is suggested by monel fasteners suppliers to be used only when the use of stainless steel is not feasible. Because of the high contents of both nickel and copper, the material is highly ductile and so it is easier to produce threads on a monel threaded rod.
Moreover, the mechanical properties are known to be so good that various industries purchase them from monel bolts suppliers. The alloy’s resistance to marine water is another area that attracts engineers. Even at elevated temperatures, the Monel Fasteners demonstrate resistance to both steam as well as to seawater and brine. Rapid flowing seawater adds additional stresses to alloys. Not only do they have a high concentration of salt, but the flow of water exerts external pressure on the monel stud bolts.
Ordinarily, a conventional stainless steel alloy like grade 304 would fail. But since the alloy offers a combination of high strength and toughness, the monel bolts & nuts function well in rapid flowing seawater. The combination of copper and nickel added in the monel lock nuts permit its use at even cryogenic temperatures. Some alloys tend to undergo a ductile to brittle transition phase, unlike the monel rivet nuts, which demonstrates great impact strength properties.
before buy from india see Comparision of Monel Fasteners price with Inconel fasteners price list
Standard | IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards |
---|---|
Threads: | BSF, UNF METRIC, UNC, BSW or as required |
Monel Fasteners Standard | ANSI – American National Standards Institute
DIN:DIN 933, DIN 931, DIN 970, DIN 934 UTS – Unified Thread Standard : UNF, NPT, NPTF, UNS, UNC, UNEF ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards |
Fasteners/ Bolts Size | M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160 |
Length | 3 mm to 200 mm |
Fasteners Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe etc |
Monel Fasteners Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Finishing | Zinc white Fasteners, (yellow, black, blue) Fasteners, black oxide Fasteners,
Dacroment Fasteners, Geometry Fasteners, plated zinc-nickel Fasteners, anodizing Fasteners, nickel plated Fasteners, Stainless steel: Passivated Self-Colour, Bright Zinc Plated (BZP) Fasteners, Hot Dip Galvanised (HDG) Fasteners, Sherardized Fasteners, Stainless Steel, some special one like DACROMET and Mechanically Applied coating Fasteners |
raw materials of Source | JSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc. |
Monel Fasteners Form | Square, Hex, Threading as per Gauge, Round Etc. |
Process of Production | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
Monel Fasteners Surface Coating |
|
Fasteners Packing | IN BULK: pallet, canton, carton / Small Boxs / pallet or customer request |
Description | Per Unit (INR) | Price in USD | Price in EURO |
---|---|---|---|
Monel K500 Fasteners : M6 X 10mg Lg Grubscrew | 149 | 2.02 | 1.67 |
Stainless Steel Fasteners (Hex Nut) Monel 400 (Size:3/4) | 300 | 4.07 | 3.36 |
Stainless Steel Fasteners (Hex Nut) Monel 400 (Size:5/8) | 158 | 2.15 | 1.77 |
Stainless Steel Fasteners (Hex Nut) Monel 400 (Size:7/8) | 426 | 5.79 | 4.77 |
fasteners (Monel 400) : Threaded Rod(Size: 5/8-11unc) | 1,632 | 22.17 | 18.29 |
fasteners (Monel 400) : Hex Nut (Size: 3/8-unc) | 63 | 0.86 | 0.71 |
fasteners (Monel 400) : Hex Head Screw (Size: 3/8-unc X 3/4) | 88 | 1.20 | 0.99 |
fasteners (Monel 400) : Hex Nut (Size: 5/8-11unc) | 138 | 1.87 | 1.55 |
fasteners (Nut/bolt Monel 400) Hex Nut (Size:5/8-11unc) | 134 | 1.82 | 1.50 |
Nominal Size, inch. | Coarse Threads - UNC | Fine Threads - UNF | 8 Thread Series - 8UN | |||
---|---|---|---|---|---|---|
Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | |
1/4 | 20 | 0.0318 | 28 | 0.0364 | -- | -- |
5/16 | 18 | 0.0524 | 24 | 0.0580 | -- | -- |
3/18 | 16 | 0.0775 | 24 | 0.0878 | -- | -- |
7/16 | 14 | 0.1063 | 20 | 0.1187 | ||
1/2 | 13 | 0.1419 | 20 | 0.1599 | ||
9/16 | 12 | 0.1820 | 18 | 0.2030 | ||
5/8 | 11 | 0.2260 | 18 | 0.2560 | ||
3/4 | 10 | 0.3340 | 16 | 0.3730 | ||
7/8 | 9 | 0.4620 | 14 | 0.5090 | ||
1 | 8 | 0.6060 | 12 | 0.6630 | ||
1 1/8 | 7 | 0.7630 | 12 | 0.8560 | 8 | 0.790 |
1 1/4 | 7 | 0.9690 | 12 | 1.0730 | 8 | 1.000 |
1 3/8 | 6 | 1.1550 | 12 | 1.3150 | 8 | 1.233 |
1 1/2 | 6 | 1.4050 | 12 | 1.5810 | 8 | 1.49 |
A Tensile stress areas are computed using the following formula: As = 0.7854 [D- (0.9743/n)]2
Where:
As = Tensile stress area, in.2,
D = Nominal size (basic major diameter), in., and,
n = number of threads per inch.
APPROX. WEIGHT IN KGS FOR 100 NOS |
|||||||||||
Fasteners SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
M-3 | 0.01 | 0.01 | |||||||||
M-4 | 0.02 | 0.02 | |||||||||
M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
M-14 | 0.82 | 0.60 | 0.38 | ||||||||
M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
M-18 | 1.27 | 0.97 | 0.66 | ||||||||
M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
M-52 | 31.90 | 33.00 | 18.20 | ||||||||
M-56 | 47.90 | 19.30 | |||||||||
M-60 | 51.60 | 20.30 | |||||||||
M-64 | 55.40 | 21.80 | |||||||||
M-68 | 57.40 | ||||||||||
M-72 | 63.40 | 24.00 |
ASME B18.1.1 | Small Solid Rivets | ASME B18.8.1 | Clevis Pins and Cotter Pins |
---|---|---|---|
ASME B18.1.2 | Large Rivets | ASME B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
ASME B18.2.1 | Square and Hex Bolts and Screws | ASME B18.9 | Plow Bolts |
ASME B18.2.2 | Square and Hex Nuts | ASME B18.10 | Track Bolts and Nuts |
ASME B18.2.6 | Fasteners for use in Structural Applications | ASME B18.11 | Miniature Screws |
ASME B18.3 | Socket Cap, Shoulder and Set Screws | ASME B18.13 | Screws and Washer Assemblies (Sems) |
ASME B18.5 | Round Head Bolts | ASME B18.15 | Forged Eyebolts |
ASME B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | ASME B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
ASME B18.6.3 | Machine Screws and Machine Screws Nuts | ASME B18.21.1 | Lock Washers |
ASME B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | ASME B18.22.1 | Plain Washers |
ASME B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | ASME B18.23.1 | Beveled Washers |
Monel Bolt Coatings |
|||||
Mirror Buffed |
Hot Dipped Galvanizing |
Epoxy Coating |
Electro Polished |
Passivation |
|
Teflon Coating |
Oxidized |
Zinc Plating |
Chrome Plating |
Nominal Sizes | F | G | H | ||||||
Width Across Flats |
Width Across Corners |
Thickness | |||||||
Basic | Max | Min | Max | Min | Basic | Max | Min | ||
1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 |
Monel Screws | 12 Point Screws, Button Head Cap Screws, Flat Head Screws, Hex Head Cap Screws, Pan Head Screws, Security Screws, Set Screws, Socket Head Cap Screws, Vented Screws |
|
||
Monel Bolts | Hex Head Bolts, Shoulder Bolts, Wedge Anchor Bolts | • DIN 931 • DIN 933 • ISO 4014 • ISO 4017 • ISO 7370 |
||
Monel Nuts | Hex Nuts, Lock Nuts | • DIN 439 / ISO 4035 • DIN 934 / ISO 4032 • DIN 985 / ISO 7040 • DIN 986 • DIN 980 / ISO 7042 / ISO 19513 • DIN 6923 / ISO 4161 |
||
Monel Studs/Rod | Studs, Threaded Rod, Weld Studs | • DIN 975 • DIN 976 |
||
Monel Washers | Flat Washers, Lock Washer | • DIN 125 / ISO 7089 / ISO 7090 • DIN 126 / ISO 7091 • DIN 127 / ISO 7090 • DIN 9021 / ISO 7093 |
||
Monel Hose Clamps | Medium Duty Hose Clamps |
MM THREADS AS PER IS 1363/67 |
||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Fasteners APPROXIMATE WEIGHT IN KGS FOR 100 NOS |
||||||||||
Fasteners LENGTH |
D I A M E T E R |
|||||||||
M 5 |
M 6 |
M 8 |
M 10 |
M 12 |
M 14 |
M 16 |
M 18 |
M 20 |
M 22 |
|
16 mm | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
20 mm | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
25 mm | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
30 mm | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
35 mm | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
40 mm | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
45 mm | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
50 mm | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
55 mm | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
60 mm | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
65 mm | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
70 mm | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
75 mm | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
80 mm | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
90 mm | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
100 mm | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
110 mm | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
120 mm | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
130 mm | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
140 mm | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
150 mm | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
160 mm | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
170 mm | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
180 mm | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
190 mm | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
200 mm | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
220 mm | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
240 mm | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
250 mm | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
260 mm | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
280 mm | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
300 mm | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
320 mm | 31.646 | 56.818 | 92.593 | |||||||
340 mm | 33.557 | 60.241 | 98.039 | |||||||
360 mm | 35.211 | 63.291 | 104.167 | |||||||
380 mm | 37.037 | 66.667 | 108.696 | |||||||
400 mm | 39.063 | 69.444 | 113.636 |
Bolts Size | A (max) | B | C (min) | D | E | F Thread Length for Bolts Length |
||
---|---|---|---|---|---|---|---|---|
max | min | 6" and shorter |
over 6" | |||||
1/4" | 0.260 | 3/8 | 0.498 | 11/64 | 0.03 | 0.01 | 0.750 | 1.000 |
5/16" | 0.324 | 1/2 | 0.665 | 13/64 | 0.03 | 0.01 | 0.875 | 1.125 |
3/8" | 0.388 | 9/16 | 0.747 | 1/4 | 0.03 | 0.01 | 1.000 | 1.250 |
7/16" | 0.452 | 5/8 | 0.828 | 19/64 | 0.03 | 0.01 | 1.125 | 1.375 |
1/2" | 0.515 | 3/4 | 0.995 | 21/64 | 0.03 | 0.01 | 1.250 | 1.500 |
5/8" | 0.642 | 15/16 | 1.244 | 27/64 | 0.06 | 0.02 | 1.500 | 1.750 |
3/4" | 0.768 | 1-1/8 | 1.494 | 1/2 | 0.06 | 0.02 | 1.750 | 2.000 |
7/8" | 0.895 | 1-5/16 | 1.742 | 19/32 | 0.06 | 0.02 | 2.000 | 2.250 |
1" | 1.022 | 1-1/2 | 1.991 | 21/32 | 0.09 | 0.03 | 2.250 | 2.500 |
1-1/8" | 1.149 | 1-11/16 | 2.239 | 3/4 | 0.09 | 0.03 | 2.500 | 2.750 |
1-1/4" | 1.277 | 1-7/8 | 2.489 | 27/32 | 0.09 | 0.03 | 2.750 | 3.000 |
1-3/8" | 1.404 | 2-1/16 | 2.738 | 29/32 | 0.09 | 0.03 | 3.000 | 3.250 |
1-1/2" | 1.531 | 2-1/4 | 2.986 | 1 | 0.09 | 0.03 | 3.250 | 3.500 |
Bolt Size | TPI | Proof Load (lbs) | Clamp Load (lbs) | Tightening Torque (ft lbs) | ||
---|---|---|---|---|---|---|
Galv+Waxed | Galv | Plain | ||||
1⁄4 | 20 | 1,053 | 790 | 2 | 4 | 3 |
5⁄16 | 18 | 1,735 | 1,302 | 3 | 8 | 7 |
3⁄8 | 16 | 2,567 | 1,925 | 6 | 15 | 12 |
7⁄16 | 14 | 3,521 | 2,640 | 10 | 24 | 19 |
1⁄2 | 13 | 4,700 | 3,525 | 15 | 37 | 29 |
9⁄16 | 12 | 6,028 | 4,521 | 21 | 53 | 42 |
5⁄8 | 11 | 7,485 | 5,614 | 29 | 73 | 58 |
3⁄4 | 10 | 11,062 | 8,297 | 52 | 130 | 104 |
7⁄8 | 9 | 15,301 | 11,476 | 84 | 209 | 167 |
1 | 8 | 20,071 | 15,053 | 125 | 314 | 251 |
11⁄8 | 7 | 25,271 | 18,953 | 178 | 444 | 355 |
11⁄4 | 7 | 32,093 | 24,070 | 251 | 627 | 501 |
13⁄8 | 6 | 38,254 | 28,690 | 329 | 822 | 657 |
11⁄2 | 6 | 46,534 | 34,900 | 436 | 1,091 | 873 |
13⁄4 | 5 | 62,928 | 47,196 | 688 | 1,721 | 1,377 |
2 | 41⁄2 | 82,800 | 62,100 | 1,035 | 2,588 | 2,070 |
21⁄4 | 41⁄2 | 107,640 | 80,730 | 1,514 | 3,784 | 3,027 |
21⁄2 | 4 | 132,480 | 99,360 | 2,070 | 5,125 | 4,140 |
23⁄4 | 4 | 163,282 | 122,461 | 2,806 | 7,016 | 5,613 |
3 | 4 | 197,726 | 148,295 | 3,707 | 9,268 | 7,415 |
31⁄4 | 4 | 235,152 | 176,364 | 4,777 | 11,941 | 9,553 |
31⁄2 | 4 | 275,890 | 206,917 | 6,035 | 15,088 | 12,070 |
33⁄4 | 4 | 319,939 | 239,954 | 7,499 | 18,746 | 14,997 |
4 | 4 | 366,970 | 275,227 | 9,174 | 22,936 | 18,348 |
NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNESS | ACROSS THE FLATS | ACROSS CORNERS | ||||
---|---|---|---|---|---|---|---|---|
D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Bolt Size |
USS |
SAE |
||||
OD (in.) |
ID (in.) |
Thickness |
OD (in.) |
ID (in.) |
Thickness |
|
1/8 (#6) |
0.375 |
0.156 |
.036/.065 |
|||
5/32 (#8) |
0.438 |
0.188 |
.036/.065 |
|||
3/16 (#10) |
0.560 |
0.250 |
.036/.065 |
0.500 |
0.220 |
.036/.065 |
7/32 (#12) |
0.562 |
0.250 |
.051/.080 |
|||
1/4 (#14) |
0.734 |
0.312 |
.051/.080 |
0.625 |
0.281 |
.051/.080 |
5/16 |
0.875 |
0.375 |
.064/.104 |
0.688 |
0.344 |
.051/.080 |
3/8 |
1.000 |
0.438 |
.064/.104 |
0.812 |
0.406 |
.051/.080 |
7/16 |
1.250 |
0.500 |
.064/.104 |
0.922 |
0.469 |
.051/.080 |
1/2 |
1.375 |
0.562 |
.086/.132 |
1.062 |
0.531 |
.074/.121 |
9/16 |
1.469 |
0.625 |
.086/.132 |
1.156 |
0.594 |
.074/.121 |
5/8 |
1.750 |
0.688 |
.108/.160 |
1.312 |
0.656 |
.074/.121 |
3/4 |
2.000 |
0.812 |
.122/.177 |
1.469 |
0.812 |
.108/.160 |
7/8 |
2.250 |
0.938 |
.136/.192 |
1.750 |
0.938 |
.108/.160 |
1 |
2.500 |
1.062 |
.136/.192 |
2.000 |
1.062 |
.108/.160 |
1 1/8 |
2.750 |
1.250 |
.136/.192 |
2.250 |
1.250 |
.108/.160 |
1 1/4 |
3.000 |
1.375 |
.136/.192 |
2.500 |
1.375 |
.136/.192 |
1 3/8 |
3.250 |
1.500 |
.153/.213 |
2.750 |
1.500 |
.136/.213 |
1 1/2 |
3.500 |
1.625 |
.153/.213 |
3.000 |
1.625 |
.153/.213 |
1 5/8 |
3.750 |
1.750 |
.153/.213 |
|||
1 3/4 |
4.000 |
1.875 |
.153/.213 |
|||
1 7/8 |
4.250 |
2.000 |
.153/.213 |
|||
2 |
4.500 |
2.125 |
.153/.213 |
|||
2 1/4 |
4.750 |
2.375 |
.320/.248 |
|||
2 1/2 |
5.000 |
2.625 |
.210/.280 |
|||
2 3/4 |
5.250 |
2.875 |
.228/.410S |
|||
3 |
5.500 |
3.125 |
.249/.327 |
Size | USS | SAE | ||||
---|---|---|---|---|---|---|
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
|
#2 | 3/32" | 1/4" | 0.020" | |||
#4 | 1/8" | 5/16" | 0.032" | |||
#6 | 5/32" | 3/8" | 0.049" | |||
#8 | 3/16" | 7/16" | 0.049" | |||
#10 | 7/32" | 1/2" | 0.049" | |||
#12 | 1/4" | 9/16" | 0.065" | |||
1/4" | 5/16" | 0.734" | 0.065" | 9/32" | 5/8" | 0.065" |
5/16" | 3/8" | 7/8" | 0.083" | 11/32" | 11/16" | 0.065" |
3/8" | 7/16" | 1" | 0.083" | 13/32" | 13/16" | 0.065" |
7/16" | 1/2" | 1-1/4" | 0.083" | 15/32" | 15/16" | 0.065" |
1/2" | 9/16" | 1-3/8" | 0.109" | 17/32" | 1-1/16" | 0.095" |
9/16" | 5/8" | 1-15/32" | 0.109" | 19/32" | 1-5/32" | 0.095" |
5/8" | 11/16" | 1-3/4" | 0.134" | 21/32" | 1-5/16" | 0.095" |
3/4" | 13/16" | 2" | 0.148" | 13/16" | 1-15/32" | 0.134" |
7/8" | 15/16" | 2-1/4" | 0.165" | 15/16" | 1-3/4" | 0.134" |
1" | 1-1/16" | 2-1/2" | 0.165" | 1-1/16" | 2" | 0.134" |
1-1/8" | 1-1/4" | 2-3/4" | 0.165" | |||
1-1/4" | 1-3/8" | 3" | 0.165" | |||
1-3/8" | 1-1/2" | 3-1/4" | 0.180" | |||
1-1/2" | 1-5/8" | 3-1/2" | 0.180" | |||
1-5/8" | 1-3/4" | 3-3/4" | 0.180" | |||
1-3/4" | 1-7/8" | 4" | 0.180" | |||
2" | 2-1/8" | 4-1/2" | 0.213" |
|
|
Metric |
Closest Inch |
---|---|
M1.4-0.3 |
0-80 (Larger) |
M2-0.4 |
1-64 (Smaller) |
M2.5-0.45 |
3-56 (Larger) |
M3-0.5 |
4-48 (Smaller) |
M3.5-0.6 |
6-40 (Same) |
M4-0.7 |
8-36 (Larger) |
M5-0.8 |
10-32 (Smaller) |
M6-1.0 |
1/4-28 (Larger) |
M7-1.0 |
1/4-28 (Smaller) |
M8-1.25 |
5/16-18 (Smaller) |
M10-1.5 |
3/8-16 (Smaller) |
M12-1.75 |
1/2-13 (Larger) |
M14-2.0 |
9/16-12 (Larger) |
M16-2.0 |
5/8-11 (Smaller) |
M18-2.5 |
3/4-10 (Larger) |
M20-2.5 |
3/4-10 (Smaller) |
M22-2.5 |
7/8-9 (Larger) |
M24-3.0 |
1-8 (Larger) |
M30-3.5 |
1 1/8-7 (Smaller) |
M36-4.0 |
1 3/8-6 (Smaller) |
Designation | C% | Co% | Cr% | Mo% | Ni% | V% | W% | Ai% | Cu% | Nb/Cb Ta% | Ti% | Fe% | Sonstige Autres-Other % |
Monel 400 Fasteners | 0.12 | - | - | - | 65.0 | - | - | - | 32.0 | - | - | 1.5 | Mn 1.0 |
Monel 401 | 0.10 | - | - | - | 43.0 | - | - | - | 53.0 | - | - | 0.75 | Si 0.25; Mn 2.25 |
Monel 404 Fasteners | 0.15 | - | 52.0-57.0 | - | - | 0.05 | rest/bal | - | - | 0.50 | Mn 0.10; Si 0.10;S o.024 | ||
Monel 502 | 0.10 | - | - | - | 63.0-17.0 | - | - | 2.5-3.5 | rest/bal | - | 0.50 | 2.0 | Mn 1.5;Si 0.5; S 0.010 |
Monel K 500 Fasteners | 0.13 | - | - | - | 64.0 | - | - | 2.8 | 30.0 | - | 0.6 | 1.0 | Mn 0.8 |
Monel R 405 | 0.15 | - | - | - | 66.0 | - | - | - | 31.0 | - | - | 1.2 | Mn 1.0; S 0.04 |
Tensile strength, Ultimate | 550 Mpa |
Tensile strength, Yield | 240 Mpa |
Elongation at Break | 48% |
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
Monel 400 Fasteners |
2.4360 |
N04400 |
NW 4400 |
NA 13 |
МНЖМц 28-2,5-1,5 |
NU-30M |
NiCu30Fe |
Monel K500 Fasteners |
2.4375 |
N05500 |
– |
– |
– |
– |
– |
Monel Alloy Fasteners |
Monel Stud Bolts |
Monel Tie Bar |
Monel Threaded Rod |
Monel Threaded Stud |
Monel Alloy Carriage Bolts |
Monel Hex Nuts Torque |
Monel Tower Bolts |
Monel Hex Nuts |
Monel U-Bolts |
Size | Finished Hex | Heavy Hex | Finished Jam | Heavy Hex Jam | Square | Heavy Square |
1⁄2“ Nut | 3.75 | 6.54 | 2.62 | 4.00 | 5.78 | 7.87 |
5⁄8“ Nut | 7.33 | 11.9 | 4.93 | 6.96 | 10.8 | 14.3 |
3⁄4“ Nut | 11.9 | 19.3 | 7.70 | 11.0 | 15.4 | 23.5 |
7⁄8“ Nut | 19.0 | 29.7 | 12.0 | 16.7 | 24.5 | 36.2 |
1″ Nut | 28.3 | 42.5 | 17.6 | 23.5 | 36.3 | 51.5 |
11⁄8“ Nut | 40.3 | 59.2 | 24.7 | 32.4 | 52.5 | 72.4 |
11⁄4“ Nut | 54.3 | 78.6 | 36.1 | 45.8 | 70.6 | 95.5 |
13⁄8“ Nut | 73.0 | 102 | 47.9 | 59.3 | 94.5 | 125.0 |
11⁄2“ Nut | 94.3 | 131 | 60.9 | 74.8 | 122 | 161 |
15⁄8“ Nut | 162 | 91.6 | ||||
13⁄4“ Nut | 151 | 204 | 100 | 114 | ||
17⁄8“ Nut | 241 | 134 | ||||
2″ Nut | 224 | 299 | 140 | 165 | ||
21⁄4“ Nut | 419 | 227 | ||||
21⁄2“ Nut | 564 | 332 | ||||
23⁄4“ Nut | 738 | 429 | ||||
3″ Nut | 950 | 545 | ||||
31⁄4“ Nut | 1194 | 651 | ||||
31⁄2“ Nut | 1526 | 851 | ||||
33⁄4“ Nut | 1812 | 1005 | ||||
4″ Nut | 2180 | 1200 |
THREADS AS PER IS 1363/67 |
||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Fasteners APPROXIMATE WEIGHT IN KGS FOR 100 NOS |
||||||||||
LENGTH |
D I A M E T E R |
|||||||||
M 5 |
M 6 |
M 8 |
M 10 |
M 12 |
M 14 |
M 16 |
M 18 |
M 20 |
M 22 |
|
16 | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
20 | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
25 | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
30 | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
35 | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
40 | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
45 | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
50 | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
55 | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
60 | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
65 | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
70 | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
75 | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
80 | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
90 | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
100 | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
110 | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
120 | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
130 | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
140 | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
150 | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
160 | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
170 | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
180 | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
190 | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
200 | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
220 | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
240 | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
250 | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
260 | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
280 | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
300 | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
320 | 31.646 | 56.818 | 92.593 | |||||||
340 | 33.557 | 60.241 | 98.039 | |||||||
360 | 35.211 | 63.291 | 104.167 | |||||||
380 | 37.037 | 66.667 | 108.696 | |||||||
400 | 39.063 | 69.444 | 113.636 |