Inconel alloys are highly prized for several reasons. One of the primary reasons why they are considered to be important is that the inconel bolt tensile strength maintains its tensile strength at elevated temperatures as well as cryogenic temperatures. Ordinarily, steel experience failure at lower temperatures because they become brittle. Since the alloy is ductile, many Inconel Fasteners Manufacturer in India, recommend using them at both elevated and at sub-zero temperatures because they are able to withstand such high levels of stress.
Their ability to bear high pressure is another reason why inconel bolts suppliers like this alloy. The nickel and chromium chemical composition give the inconel threaded rod a wide array of properties, which makes them useful in several industries. The tensile and yield strength of inconel bolts and nuts is higher than some grades of austenitic stainless steels, which is why they do not compromise on their mechanical properties at elevated temperatures.
The other reason why many buyers prefer using this alloy is that the Inconel Fasteners have excellent corrosion resistance properties. Although the alloy is resistant to marine environments some kind of inconel bolt grade would not be used for marine engineering, as the alloy is expensive. However, due to its resistance to oxidation and its ability to withstand elevated temperatures, the inconel nuts make value addition in the aerospace industry.
Check comparision of Inconel Fasteners price with Monel Fasteners price list Before buy
Standard | IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards |
---|---|
Inconel Fasteners Threads: | BSF, UNF METRIC, UNC, BSW or as required |
Standard | ANSI – American National Standards Institute
DIN:DIN 933, DIN 931, DIN 970, DIN 934 UTS – Unified Thread Standard : UNF, NPT, NPTF, UNS, UNC, UNEF ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards |
Inconel Fasteners/ Bolts Size | M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160 |
Length | 3 mm to 200 mm |
Inconel Fasteners Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe etc |
Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Finishing | Zinc white, (yellow, black, blue), black oxide,
Dacroment, Geometry, plated zinc-nickel, anodizing, nickel plated, Stainless steel: Passivated Self-Colour, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, Stainless Steel, some special one like DACROMET and Mechanically Applied coating |
raw materials of Source | JSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc. |
Form | Square, Hex, Threading as per Gauge, Round Etc. |
Inconel Fasteners Process of Production | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
Surface Coating |
|
Inconel Fasteners Packing | IN BULK: pallet, canton, carton / Small Boxs / pallet or customer request |
Description | Per Unit (INR) | Price in USD | Price in EURO |
---|---|---|---|
Inconel 600 Stud Bolt With 2 Un Heavy Hex, Nuts In Gr. Uns No.6600, Unc Thread.size: 3/4 Dia X 140 Mm Long | 2,955 | 40.04 | 33.03 |
Hex Bolt Ft 1/2 - 13unc X 60mm B18.2.1- Inconel 625 Other Screws And Bolts W/nwith Their Nuts Or Washers Threaded | 401 | 5.43 | 4.48 |
Hex Bolt Ft 1/2 - 13unc X 60mm B18.2.1- Inconel 625 Other Screws And Bolts W/nwith Their Nuts Or Washers Threaded | 321 | 4.35 | 3.59 |
Hex Bolt Ft 1/2 - 13unc X 60mm B18.2.1- Inconel 625 Other Screws And Bolts W/nwith Their Nuts Or Washers Threaded | 401 | 5.43 | 4.48 |
Stud Bolt, Astm A193-b7 W/2 Hex Nuts, A194-2h, Inconel Belleville Washer Unc 7/8x 175mm Long | 436 | 5.91 | 4.87 |
Stud Bolt, Astm A193-b7 W/2 Hex Nuts, A194-2h, Inconel Belleville Washer Unc 1x170 Mm Long | 482 | 6.53 | 5.39 |
Stud Bolt, Astm A193-b7 W/2 Hex Nuts, A194-2h, Inconel Belleville Washer Unc 7/8x 125 Mm Long | 436 | 5.91 | 4.87 |
Size | Finished Hex | Heavy Hex | Finished Jam | Heavy Hex Jam | Square | Heavy Square |
1/2″ | 3.75 | 6.54 | 2.62 | 4.00 | 5.78 | 7.87 |
5/8″ | 7.33 | 11.9 | 4.93 | 6.96 | 10.8 | 14.3 |
3/4″ | 11.9 | 19.3 | 7.70 | 11.0 | 15.4 | 23.5 |
7/8″ | 19.0 | 29.7 | 12.0 | 16.7 | 24.5 | 36.2 |
1″ | 28.3 | 42.5 | 17.6 | 23.5 | 36.3 | 51.5 |
11/8″ | 40.3 | 59.2 | 24.7 | 32.4 | 52.5 | 72.4 |
11/4″ | 54.3 | 78.6 | 36.1 | 45.8 | 70.6 | 95.5 |
13/8″ | 73.0 | 102 | 47.9 | 59.3 | 94.5 | 125.0 |
11/2″ | 94.3 | 131 | 60.9 | 74.8 | 122 | 161 |
15/8″ | 162 | 91.6 | ||||
13/4″ | 151 | 204 | 100 | 114 | ||
17/8″ | 241 | 134 | ||||
2″ | 224 | 299 | 140 | 165 | ||
21/4″ | 419 | 227 | ||||
21/2″ | 564 | 332 | ||||
23/4″ | 738 | 429 | ||||
3″ | 950 | 545 | ||||
31/4″ | 1194 | 651 | ||||
31/2″ | 1526 | 851 | ||||
33/4″ | 1812 | 1005 | ||||
4″ | 2180 | 1200 |
B18.1.1 | Small Solid Rivets | B18.8.1 | Clevis Pins and Cotter Pins |
---|---|---|---|
B18.1.2 | Large Rivets | B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
B18.2.1 | Square and Hex Bolts and Screws | B18.9 | Plow Bolts |
B18.2.2 | Square and Hex Nuts | B18.10 | Track Bolts and Nuts |
B18.2.6 | Fasteners for use in Structural Applications | B18.11 | Miniature Screws |
B18.3 | Socket Cap, Shoulder and Set Screws | B18.13 | Screw and Washer Assemblies (Sems) |
B18.5 | Round Head Bolts | B18.15 | Forged Eyebolts |
B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
B18.6.3 | Machine Screws and Machine Screw Nuts | B18.21.1 | Lock Washers |
B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | B18.22.1 | Plain Washers |
B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | B18.23.1 | Beveled Washers |
Hexagon Bolts / Set Screws |
Stud Bolts |
Hexagon Nuts |
Socket Cap screws |
---|---|---|---|
DIN 931 |
BS4882 |
DIN 934 |
DIN 912 |
DIN 933 |
DIN 976 |
BS 1768 |
DIN 6912 |
BS 1768 |
BS 1769 |
DIN 7984 |
|
UNI 5731 |
BS 1083 |
ANSI B18.3 |
|
UNI 5739 |
BS 3692 |
ISO 4762 |
|
ISO 4014 |
ISO 4032 |
UNI 5931 |
|
ISO 4017 |
ISO 4033 |
BS 2470 |
|
BS 1769 |
ANSI B18.2.2 |
BS 4168 |
|
BS 3692 |
|||
ANSI B18.2.1 |
Socket & Slotted Set Screws |
Socket & Slotted Countersunk Screws |
Studs |
Washers |
---|---|---|---|
DIN 913 |
DIN 963 |
DIN 938 |
DIN 125 |
DIN 914 |
DIN 7991 |
DIN 939 |
DIN 9021 |
DIN 915 |
BS 4168 |
DIN 2510 |
BS 4320 |
DIN 916 |
BS 1981 |
BS 4439 |
BS 3410 |
DIN 551 |
BS 483 |
BS 2693 |
|
DIN 553 |
BS 2470 |
Spring Washers |
|
DIN 438 |
DIN 127 |
||
BS 4168 |
BS 4464 |
||
BS 1802 |
Flange Size |
B16.5 Class 150 RF/ Ring Gaskets |
B16.5 Class 150 FF/ Full Face Gaskets |
||||||||
---|---|---|---|---|---|---|---|---|---|---|
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
|||||||
1st |
2nd |
Final |
Dwg/No. |
Bolt Size |
1st |
2nd |
Final |
Dwg*/No. |
Bolt Size |
|
1/2 |
10 |
20 |
30 |
4-bolt |
1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
3/4 |
13 |
27 |
40 |
4-bolt |
1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
1 |
15 |
30 |
50 |
4-bolt |
1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
1-1/4 |
20 |
40 |
60 |
4-bolt |
1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
1-1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
20 |
40 |
60 |
4-bolt |
1/2 |
2 |
40 |
80 |
120 |
4-bolt |
5/8 |
40 |
80 |
120 |
4-bolt |
5/8 |
2-1/2 |
40 |
80 |
120 |
4-bolt |
5/8 |
40 |
80 |
120 |
4-bolt |
5/8 |
3 |
40 |
80 |
120 |
4-bolt |
5/8 |
40 |
80 |
120 |
4-bolt |
5/8 |
3-1/2 |
40 |
80 |
120 |
8-bolt |
5/8 |
40 |
80 |
120 |
8-bolt |
5/8 |
4 |
40 |
80 |
120 |
8-bolt |
5/8 |
40 |
80 |
120 |
8-bolt |
5/8 |
5 |
60 |
120 |
200 |
8-bolt |
3/4 |
60 |
120 |
200 |
8-bolt |
3/4 |
6 |
60 |
120 |
200 |
8-bolt |
3/4 |
60 |
120 |
200 |
8-bolt |
3/4 |
8 |
60 |
120 |
200 |
8-bolt |
3/4 |
60 |
120 |
200 |
8-bolt |
3/4 |
10 |
95 |
190 |
320 |
12-bolt |
7/8 |
95 |
190 |
320 |
12-bolt |
7/8 |
12 |
95 |
190 |
320 |
12-bolt |
7/8 |
95 |
190 |
320 |
12-bolt |
7/8 |
14 |
147 |
294 |
490 |
12-bolt |
1 |
147 |
294 |
490 |
12-bolt |
1 |
16 |
147 |
294 |
490 |
16-bolt |
1 |
147 |
294 |
490 |
16-bolt |
1 |
18 |
213 |
426 |
710 |
16-bolt |
1-1/8 |
213 |
426 |
710 |
16-bolt |
1-1/8 |
20 |
213 |
426 |
710 |
20-bolt |
1-1/8 |
213 |
426 |
710 |
20-bolt |
1-1/8 |
24 |
300 |
600 |
1,000 |
20-bolt |
1-1/4 |
300 |
600 |
1,000 |
20-bolt |
1-1/4 |
Flange Size |
B16.5 Class 300 RF/ Ring Gaskets |
||||
---|---|---|---|---|---|
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence* |
||||
1st |
2nd |
Final |
Dwg/No. |
Stud Bolts Size |
|
1/2 |
10 |
20 |
30 |
4-bolt |
1/2 |
3/4 |
15 |
30 |
50 |
4-bolt |
5/8 |
1 |
21 |
42 |
70 |
4-bolt |
5/8 |
1-1/4 |
30 |
60 |
100 |
4-bolt |
5/8 |
1-1/2 |
45 |
90 |
150 |
4-bolt |
3/4 |
2 |
33 |
66 |
110 |
8-bolt |
5/8 |
2-1/2 |
42 |
84 |
140 |
8-bolt |
3/4 |
3 |
60 |
120 |
200 |
8-bolt |
3/4 |
3-1/2 |
60 |
120 |
200 |
8-bolt |
3/4 |
4 |
60 |
120 |
200 |
8-bolt |
3/4 |
5 |
60 |
120 |
200 |
8-bolt |
3/4 |
6 |
60 |
120 |
200 |
12-bolt |
3/4 |
8 |
95 |
190 |
320 |
12-bolt |
7/8 |
10 |
147 |
294 |
490 |
16-bolt |
1 |
12 |
213 |
426 |
710 |
16-bolt |
1-1/8 |
14 |
195 |
390 |
650 |
20-bolt |
1-1/8 |
16 |
273 |
546 |
910 |
20-bolt |
1-1/4 |
18 |
300 |
600 |
1,000 |
24-bolt |
1-1/4 |
20 |
300 |
600 |
1,000 |
24-bolt |
1-1/4 |
24 |
465 |
930 |
1,550 |
24-bolt |
1-1/2 |
APPROX. WEIGHT IN KGS FOR 100 NOS |
|||||||||||
SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
M-3 | 0.01 | 0.01 | |||||||||
M-4 | 0.02 | 0.02 | |||||||||
M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
M-14 | 0.82 | 0.60 | 0.38 | ||||||||
M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
M-18 | 1.27 | 0.97 | 0.66 | ||||||||
M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
M-52 | 31.90 | 33.00 | 18.20 | ||||||||
M-56 | 47.90 | 19.30 | |||||||||
M-60 | 51.60 | 20.30 | |||||||||
M-64 | 55.40 | 21.80 | |||||||||
M-68 | 57.40 | ||||||||||
M-72 | 63.40 | 24.00 |
Monel® is another metal comprising of a nickel-copper combination. Like Inconel®, which is a nickel-chromium combination, Monel® can be utilized in extraordinary conditions with high warmth.Monel® metal comprises of a gathering of nickel combinations that have a solid consumption protection from synthetic substances, heat, and different specialists including seawater.
Since Inconel® is a nickel and chromium composite, it's impervious to oxidation and is ideal for occupations with various gasses and enormous temperature errors. Applications in the oil and gas extraction, aviation, and clinical ventures would be more qualified for Inconel®. In examination, Monel's® copper added substance gives it upgraded erosion opposition and makes it especially solid against ocean water just as hydrochloric and sulfuric acids.
Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 |
Sizes | A | B | C | Weight (lbs.) Per 100 Pieces |
Inside Diameter | Outside Diameter | Thickness | ||
1/2 | 9/16 | 13/8 | 0.109 | 4 |
5/8 | 11/16 | 13/4 | 0.134 | 8 |
3/4 | 13/16 | 2 | 0.148 | 11 |
7/8 | 15/16 | 21/4 | 0.165 | 15 |
1 | 11/16 | 21/2 | 0.165 | 19 |
11/8 | 11/4 | 23/4 | 0.165 | 22 |
11/4 | 13/8 | 3 | 0.165 | 26 |
13/8 | 11/2 | 31/4 | 0.180 | 33 |
11/2 | 15/8 | 31/2 | 0.180 | 38 |
15/8 | 13/4 | 33/4 | 0.180 | 43 |
13/4 | 17/8 | 4 | 0.180 | 50 |
17/8 | 2 | 41/4 | 0.180 | 57 |
2 | 21/8 | 41/2 | 0.180 | 63 |
21/4 | 23/8 | 43/4 | 0.220 | 83 |
21/2 | 25/8 | 5 | 0.238 | 96 |
23/4 | 27/8 | 51/4 | 0.259 | 110 |
3 | 31/8 | 51/2 | 0.284 | 130 |
Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | |||
Psi – 1,35,000 , MPa -930 | Psi – 75,000 , MPa – 517 | 42.5 | – | – |
UNS |
ASTM |
EURO |
ALLOY |
---|---|---|---|
N06600 |
B166 |
2.4816 |
600 |
N06601 |
B166 |
2.4627 |
601 |
N06625 |
B446 |
2.4856 |
625 |
N07718 |
B637 |
1.4668 |
718 |
N07750 |
B637 |
2.4669 |
750 |
N08800 |
B408 |
1.4876 |
800 |
N08825 |
B425 |
2.4858 |
825 |
N08925 |
B805 |
1.4529 |
925 |
Inconel Fasteners | Element (% By Mass) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ni | Cr | Fe | Mo | Nb | Co | Mn | Cu | Al | Ti | Si | C | S | P | B | |
600 | 72.0 | 14.0–17.0 | 6.0–10.0 | 1.0 | 0.5 | 0.5 | 0.15 | 0.015 | |||||||
617 | 44.2–56.0 | 20.0–24.0 | 3.0 | 8.0–10.0 | 10.0–15.0 | 0.5 | 0.5 | 0.8–1.5 | 0.6 | 0.5 | 0.15 | 0.015 | 0.015 | 0.006 | |
625 | 58.0 | 20.0–23.0 | 5.0 | 8.0–10.0 | 3.15–4.15 | 1.0 | 0.5 | 0.4 | 0.4 | 0.5 | 0.1 | 0.015 | 0.015 | ||
690 | 59.5 | 30 | 9.2 | 0.35 | 0.01 | 0.02 | 0.35 | 0.019 | 0.003 | ||||||
718 | 50.0–55.0 | 17.0–21.0 | Balance | 2.8–3.3 | 4.75–5.5 | 1.0 | 0.35 | 0.2–0.8 | 0.65–1.15 | 0.3 | 0.35 | 0.08 | 0.015 | 0.015 | 0.006 |
X-750 | 70.0 | 14.0–17.0 | 5.0–9.0 | 0.7–1.2 | 1.0 | 1.0 | 0.5 | 0.4–1.0 | 2.25–2.75 | 0.5 | 0.08 | 0.01 |
Inconel Fasteners & Bolts |
Inconel Deck Bolts |
Inconel Flat Head Bolts |
Inconel Hurricane Bolts |
Inconel Barrel Nuts |
Inconel Button Head Bolts |
Inconel Coach Bolts |
Inconel Header Bolts |
Inconel Weld Nuts |
Inconel Rivet Nuts |
Inconel Bolts |
Inconel Automotive Bolts |
MM THREADS AS PER IS 1363/67 |
||||||||||
---|---|---|---|---|---|---|---|---|---|---|
APPROXIMATE WEIGHT IN KGS FOR 100 NOS |
||||||||||
LENGTH |
D I A M E T E R |
|||||||||
M 5 |
M 6 |
M 8 |
M 10 |
M 12 |
M 14 |
M 16 |
M 18 |
M 20 |
M 22 |
|
16 mm | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
20 mm | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
25 mm | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
30 mm | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
35 mm | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
40 mm | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
45 mm | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
50 mm | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
55 mm | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
60 mm | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
65 mm | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
70 mm | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
75 mm | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
80 mm | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
90 mm | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
100 mm | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
110 mm | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
120 mm | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
130 mm | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
140 mm | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
150 mm | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
160 mm | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
170 mm | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
180 mm | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
190 mm | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
200 mm | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
220 mm | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
240 mm | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
250 mm | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
260 mm | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
280 mm | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
300 mm | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
320 mm | 31.646 | 56.818 | 92.593 | |||||||
340 mm | 33.557 | 60.241 | 98.039 | |||||||
360 mm | 35.211 | 63.291 | 104.167 | |||||||
380 mm | 37.037 | 66.667 | 108.696 | |||||||
400 mm | 39.063 | 69.444 | 113.636 |