
compare Incoloy 800 pipe price with incoloy 825 pipe price list
Pipes produced from nickel based Incoloy 800 are durable and are specifically designed to meet the requirements of high temperature environments. Though the Incoloy 800 Pipe is a low carbon containing alloy, there are two variations available for this grade that is, Incoloy 800H and Incoloy 800HT. Both the variations have controlled chemistry. This means that the chemistry for Inconel 800h Seamless Pipe has restricted chemistry of aluminum and titanium, with the carbon content lower than grade 800.
On the other hand, the chemistry of ASTM B407 Incoloy 800HT Hollow Pipe has limitations set with regards to the content of aluminum and titanium combined. The content of both aluminum and titanium in UNS N08811 Rectangular Pipe is kept to a minimum range of 0.85% - 1.20%., whereas the range for grade 800H is about 0.30% - 1.20%. By altering the chemistry of both 800h as well as Alloy 800ht Welded Pipe, there are changes that occur in terms of the corrosion resistance and their mechanical strength. For instance, the UNS N08810 Square Pipe will exhibit properties to a significantly higher degree, including creep and rupture strength.
Because the microstructure of the austenitic grade Incoloy 800 Seamless Pipe is stable, the alloy can manifest good resistance to thermal cycling temperatures. These temperatures are very high and on several occasions using a conventional alloy could lead to failure at such points of elevation. The use of ASME SB407 800 Incoloy Hexagonal Pipe is also well received in some steam generation plants. This is because the chemistry of the alloy permits the WERKSTOFF NR. 1.4876 ERW Pipe to resist problems such as stress related corrosion cracking. Industries such as power generation, nuclear power, and the petrochemical industries prefer using the UNS N08800 EFW Pipe, due to its unique combination of properties.
| Size | ½” to 6” NB Sch 10s, 40s, & 80s, 160s |
| Wall Thickness | 0.1 - 60 mm |
| Incoloy 800 pipe Length |
|
| Surface Finish | Cold Finish, Bright, Polished, Annealing, Pickling, or as per client requirements |
| Standard | JIS, AISI, ASME, ASTM, AMS, GB, DIN, EN, GOST |
| Incoloy 800 pipe Manufacturing types | Seamless, Welded, ERW, EFW |
| Manufacturing Shapes | Round, Square, Rectangle, Box Section |
| Manufacturing Technology | Hot / Cold Formed |
| Inspection, Test Reports | EN 10204 3.1, Mill Test Certificates, PMI Test Reports, Chemical Reports, Mechanical Reports, NABL Approved Lab Reports, Visual Inspection Reports, Destructive and Non Destructive Test Reports, Third Party Inspection |
| Incoloy 800 pipe Technique | Cold Rolled Hot Rolled |
NPS |
Outside Diameter |
Wall Thickness |
Weight |
Weight |
|||
in |
mm |
in |
mm |
Sched |
kg/Mtr |
Lb/ft |
|
1/2″ |
0.840 |
21 |
0.109 |
2.769 |
40 STD |
1.268 |
0.851 |
0.147 |
3.734 |
80 STD |
1.621 |
1.088 |
|||
3/4″ |
1.050 |
27 |
0.113 |
2.870 |
40 STD |
1.684 |
1.131 |
0.154 |
3.912 |
80 STD |
2.195 |
1.474 |
|||
1″ |
1.315 |
33 |
0.133 |
3.378 |
40 STD |
2.501 |
1.679 |
0.179 |
4.547 |
80 STD |
3.325 |
2.172 |
|||
1 1/4″ |
1.660 |
42 |
0.140 |
3.556 |
40 STD |
3.385 |
2.273 |
0.191 |
4.851 |
80 STD |
4.464 |
2.997 |
|||
1 1/2″ |
1.900 |
48 |
0.145 |
3.683 |
40 STD |
4.048 |
2.718 |
0.200 |
5.080 |
80 STD |
5.409 |
3.361 |
|||
2″ |
2.375 |
60 |
0.154 |
3.912 |
40 STD |
5.441 |
3.653 |
0.218 |
5.537 |
80 STD |
7.480 |
5.022 |
|||
2 1/2″ |
2.875 |
73 |
0.203 |
5.516 |
40 STD |
8.629 |
5.793 |
0.276 |
7.010 |
80 STD |
11.411 |
7.661 |
|||
3″ |
3.500 |
89 |
0.216 |
5.486 |
40 STD |
11.284 |
7.576 |
0.300 |
7.620 |
80 STD |
15.272 |
10.253 |
|||
4″ |
4.500 |
114 |
0.237 |
6.020 |
16.073 |
10.790 |
|
0.337 |
8.560 |
22.318 |
14.983 |
||||
6″ |
6.625 |
168 |
0.188 |
4.775 |
19.252 |
12.924 |
|
0.203 |
5.516 |
20.739 |
13.923 |
||||
0.219 |
5.563 |
22.318 |
14.983 |
||||
0.250 |
6.350 |
25.354 |
17.021 |
||||
0.280 |
7.112 |
40 STD |
58.263 |
18.974 |
|||
0.312 |
7.925 |
31.334 |
21.036 |
||||
0.375 |
9.525 |
37.285 |
25.031 |
||||
0.432 |
10.973 |
80 XHY |
42.561 |
28.573 |
|||
0.500 |
12.700 |
48.719 |
32.708 |
||||
8″ |
8.625 |
219 |
0.188 |
4.775 |
25.233 |
16.940 |
|
0.203 |
5.156 |
27.198 |
18.259 |
||||
0.219 |
5.563 |
29.286 |
19.661 |
||||
0.250 |
6.350 |
20 |
33.308 |
22.361 |
|||
0.277 |
7.036 |
30 |
36.786 |
24.696 |
|||
0.322 |
8.179 |
40 |
42.352 |
28.554 |
|||
0.375 |
9.525 |
49.216 |
33.041 |
||||
0.406 |
10.312 |
60 |
53.085 |
35.638 |
|||
0.500 |
12.700 |
80 XHY |
64.627 |
43.388 |
|||
10″ |
10.750 |
273 |
0.188 |
4.775 |
31.588 |
21.207 |
|
0.219 |
5.563 |
36.689 |
24.631 |
||||
0.250 |
6.350 |
20 |
41.759 |
28.035 |
|||
0.307 |
7.798 |
30 |
51.002 |
34.240 |
|||
0.344 |
8.738 |
56.946 |
38.231 |
||||
0.365 |
9.271 |
40 STD |
63.301 |
40.483 |
|||
0.438 |
11.125 |
71.852 |
48.238 |
||||
0.500 |
12.700 |
60 XHY |
81.530 |
54.735 |
|||
0.594 |
15.088 |
80 |
95.969 |
64.429 |
|||
12″ |
12.750 |
324 |
0.188 |
4.775 |
37.570 |
25.222 |
|
0.219 |
5.563 |
43.657 |
29.309 |
||||
0.250 |
6.350 |
49.713 |
33.375 |
||||
0.281 |
7.137 |
55.739 |
37.420 |
||||
0.312 |
7.925 |
61.735 |
41.445 |
||||
0.375 |
9.525 |
73.824 |
49.562 |
||||
0.406 |
10.312 |
79.727 |
53.525 |
||||
0.500 |
12.700 |
97.438 |
65.415 |
||||
0.562 |
14.275 |
108.966 |
73.154 |
||||
14″ |
14.000 |
356 |
0.188 |
4.775 |
41.308 |
27.732 |
|
0.219 |
5.563 |
48.012 |
32.233 |
||||
0.250 |
6.350 |
20 |
54.685 |
36.713 |
|||
0.281 |
7.137 |
61.327 |
41.172 |
||||
0.312 |
7.925 |
67.939 |
45.611 |
||||
0.375 |
9.525 |
STD |
81.281 |
54.568 |
|||
0.438 |
11.125 |
40 |
94.498 |
63.441 |
|||
0.500 |
12.700 |
XHY |
107.381 |
72.090 |
|||
| 0.625 | 15.875 |
132.983 |
89.278 |
||||
16” |
16.000 |
406 |
0.188 |
4.775 |
47.290 |
21.748 |
|
0.219 |
5.563 |
54.980 |
36.910 |
||||
0.250 |
6.350 |
10 |
62.639 |
42.053 |
|||
0.281 |
7.137 |
70.268 |
47.174 |
||||
0.312 |
7.925 |
20 |
77.866 |
52.275 |
|||
0.344 |
8.738 |
85.677 |
57.519 |
||||
0.375 |
9.525 |
30 STD |
93.213 |
62.578 |
|||
0.438 |
11.125 |
108.433 |
72.797 |
||||
0.500 |
12.700 |
40 XHY |
123.289 |
82.770 |
|||
18″ |
18.000 |
457 |
0.219 |
5.563 |
61.948 |
41.588 |
|
0.250 |
6.350 |
70.593 |
47.393 |
||||
0.281 |
7.137 |
79.208 |
53.176 |
||||
0.312 |
7.925 |
20 |
87.792 |
58.939 |
|||
0.375 |
9.525 |
STD |
105.144 |
70.588 |
|||
0.438 |
11.125 |
30 |
122.369 |
82.152 |
|||
0.500 |
12.700 |
XHY |
139.198 |
93.450 |
|||
0.562 |
14.275 |
40 |
155.904 |
104.666 |
|||
0.625 |
15.875 |
172.754 |
115.978 |
||||
20″ |
20.000 |
508 |
0.250 |
6.350 |
78.547 |
52.733 |
|
0.282 |
7.163 |
88.458 |
59.386 |
||||
0.312 |
7.925 |
97.719 |
65.604 |
||||
0.375 |
9.525 |
20 STD |
117.075 |
78.598 |
|||
0.438 |
11.125 |
136.305 |
91.508 |
||||
0.500 |
12.700 |
30 XHY |
155.106 |
104.130 |
|||
0.594 |
15.088 |
40 |
183.378 |
123.110 |
|||
0.625 |
15.875 |
192.640 |
129.328 |
||||
0.688 |
17.475 |
211.368 |
141.901 |
||||
24″ |
24.000 |
610 |
0.250 |
6.350 |
94.456 |
63.413 |
|
0.281 |
7.137 |
106.029 |
71.183 |
||||
0.312 |
7.925 |
117.573 |
18.932 |
||||
0.375 |
9.525 |
20 STD |
140.938 |
64.618 |
|||
0.438 |
11.125 |
164.176 |
110.219 |
||||
0.500 |
12.700 |
XHY |
186.923 |
125.490 |
|||
0.625 |
15.875 |
232.410 |
156.028 |
||||
0.688 |
17.475 |
40 |
255.148 |
171.293 |
|||
0.750 |
19.050 |
277.401 |
186.233 |
||||
30″ |
30.000 |
762 |
0.250 |
6.350 |
118.318 |
79.433 |
|
0.281 |
7.137 |
132.851 |
89.189 |
||||
0.312 |
7.925 |
10 |
147.353 |
98.925 |
|||
0.375 |
9.525 |
STD |
176.731 |
118.648 |
|||
0.438 |
11.125 |
205.983 |
138.286 |
||||
0.500 |
12.700 |
20 XHY |
234.647 |
157.530 |
|||
0.625 |
15.875 |
30 |
292.066 |
196.078 |
|||
0.688 |
17.475 |
320.817 |
215.380 |
||||
0.750 |
19.050 |
348.988 |
234.293 |
||||
36″ |
36.000 |
914 |
0.250 |
6.350 |
142.180 |
95.453 |
|
0.281 |
7.137 |
159.672 |
107.196 |
||||
0.312 |
7.925 |
10 |
177.133 |
118.918 |
|||
0.375 |
9.525 |
STD |
215.525 |
142.678 |
|||
0.438 |
11.125 |
247.790 |
166.353 |
||||
0.500 |
12.700 |
20 XHY |
282.372 |
198.570 |
|||
0.625 |
15.875 |
351.723 |
236.128 |
||||
0.688 |
17.475 |
386.487 |
259.467 |
||||
0.750 |
19.050 |
420.576 |
282.353 |
||||
42″ |
42.000 |
1067 |
0.312 |
7.925 |
206.914 |
138.911 |
|
0.375 |
9.525 |
STD |
248.319 |
166.708 |
|||
0.500 |
12.700 |
XHY |
33.097 |
221.610 |
|||
0.750 |
19.050 |
492.163 |
330.413 |
||||
48″ |
48.000 |
1219 |
0.375 |
9.525 |
STD |
284.112 |
190.738 |
0.438 |
11.125 |
331.404 |
222.487 |
||||
0.500 |
12.700 |
XHY |
377.822 |
253.650 |
|||
0.750 |
19.050 |
563.750 |
378.473 |
||||
0.875 |
22.225 |
655.969 |
440.383 |
||||
OD mm |
Pipe WT mm |
in. |
Sch |
Kg/m |
|---|---|---|---|---|
13.72 |
1.65 |
1/4 |
10S |
0.50 |
13.72 |
2.24 |
1/4 |
40S |
0.64 |
13.72 |
3.02 |
1/4 |
80S |
0.81 |
17.15 |
1.65 |
3/8 |
10S |
0.64 |
17.15 |
2.31 |
3/8 |
40S |
0.86 |
17.15 |
3.20 |
3/8 |
80S |
1.12 |
21.34 |
2.11 |
1/2 |
10S |
1.02 |
21.34 |
2.77 |
1/2 |
40S |
1.29 |
21.34 |
3.73 |
1/2 |
80S |
1.65 |
26.67 |
2.11 |
3/4 |
10S |
1.30 |
26.67 |
2.87 |
3/4 |
40S |
1.71 |
26.67 |
3.91 |
3/4 |
80S |
2.23 |
33.40 |
2.77 |
1 |
10S |
2.13 |
33.40 |
3.38 |
1 |
40S |
2.54 |
33.40 |
4.55 |
1 |
80S |
3.29 |
33.40 |
6.352) |
1 |
160 |
4.30 |
42.16 |
2.77 |
1¼ |
10S |
2.73 |
42.16 |
3.56 |
1¼ |
40S |
3.44 |
42.16 |
4.85 |
1¼ |
80S |
4.53 |
42.16 |
6.352) |
1¼ |
160 |
5.69 |
48.26 |
2.77 |
1½ |
10S |
3.16 |
48.26 |
3.68 |
1½ |
40S |
4.11 |
48.26 |
5.08 |
1½ |
80S |
5.49 |
60.33 |
2.77 |
2 |
10S |
3.99 |
60.33 |
3.91 |
2 |
40S |
5.52 |
60.33 |
5.54 |
2 |
80S |
7.60 |
60.33 |
8.742) |
2 |
160 |
11.29 |
73.03 |
3.05 |
2½ |
10S |
5.35 |
73.03 |
5.16 |
2½ |
40S |
8.77 |
73.03 |
7.01 |
2½ |
80S |
11.59 |
88.90 |
3.05 |
3 |
10S |
6.56 |
88.90 |
5.49 |
3 |
40S |
11.47 |
88.90 |
7.62 |
3 |
80S |
15.51 |
88.90 |
11.132) |
3 |
160 |
21.67 |
101.60 |
3.05 |
3½ |
10S |
7.53 |
101.60 |
5.74 |
3½ |
40S |
13.78 |
101.60 |
8.08 |
3½ |
80S |
18.92 |
114.30 |
3.05 |
4 |
10S |
8.50 |
114.30 |
6.02 |
4 |
40S |
16.32 |
114.30 |
8.56 |
4 |
80S |
22.67 |
114.30 |
13.492) |
4 |
160 |
34.05 |
141.30 |
6.55 |
5 |
40S |
22.10 |
141.30 |
9.53 |
5 |
80S |
31.44 |
141.30 |
15.882) |
5 |
160 |
49.87 |
168.28 |
3.4 |
6 |
10S |
14.04 |
168.28 |
7.11 |
6 |
40S |
28.69 |
168.28 |
10.97 |
6 |
80S |
43.21 |
168.28 |
14.27 |
6 |
120 |
54.75 |
168.28 |
18.262) |
6 |
160 |
68.59 |
219.08 |
8.18 |
8 |
40S |
43.20 |
219.08 |
12.7 |
8 |
80S |
65.63 |
219.08 |
18.23 |
8 |
120 |
91.30 |
219.08 |
23.012) |
8 |
160 |
112.97 |
| Grade | C | Mn | Si | Fe | S | Cr | Al-Ti | Ni | |
| Incoloy 800 Pipes | min. | – | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
| Incoloy 800H Pipes | min. | 0.05 | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
| Incoloy 800HT Pipes | min. | 0.06 | – | – | 39.5 | – | 19.0 | 0.85/0.25 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 1.20/0.60 | 35.0 | |
| Incoloy Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| Incoloy 800-H-HT | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa –205 | 30 | – | – |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 Pipes | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H Pipes | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT Pipes | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
| Incoloy Pipe O.D. (in.) |
Wall Thickness of Pipe (inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| .028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
| Working Pressure (psig) | ||||||||
| 1/8 | 7900 | 10100 | ||||||
| 1/4 | 3700 | 4800 | 7000 | 9500 | ||||
| 5/16 | 3700 | 5400 | 7300 | |||||
| 3/8 | 3100 | 4400 | 6100 | |||||
| 1/2 | 2300 | 3200 | 4400 | |||||
| 3/4 | 2200 | 3000 | 4000 | 4600 | ||||
| 1 | 2200 | 2900 | 3400 | 3900 | 4300 | |||
1/8" IPS(.405"O. D.) |
3 1/2" IPS( 4.000"O. D.) |
|---|---|
SCH 40, 80 |
SCH 10, 40, 80, 160, XXH |
1/4" IPS(.540"O. D.) |
4" IPS(4.500"O. D.) |
SCH 10, 40, 80 |
SCH 10, 40, 80, 160, XXH |
3/8" IPS(.675"O. D.) |
5" IPS( 5.563"O. D.) |
SCH 10, 40, 80 |
SCH 10, 40, 80, 160, XXH |
1/2" IPS(.840"O. D.) |
6" IPS(6.625"O. D.) |
SCH 5, 10, 40, 80, 160, XXH |
SCH 5, 10, 40, 80, 120, 160, XXH |
3/4" IPS(1.050"O. D.) |
8 ” IPS(8.625"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH 5, 10, 40, 80, 120, 160, XXH |
1" IPS:(1.315′O. D.) |
10" IPS(10.750"O. D.) |
SCH 5, 10, 40, 80, 160, XXH |
SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
1-1/4" IPS(1.660"O. D.) |
12" IPS(12.750"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
1-1/2" IPS(1.900"O. D.) |
14" IPS(14.000"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH10 (.188), SCH40 (.375) |
2" IPS(2.375"O. D.) |
16" IPS(16.000"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH10(.188), SCH40(.375) |
2 1/2" IPS(2.875"O. D.) |
18" IPS (18.000"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH-40 (.375) |
3" IPS( 3.500"O. D.) |
|
SCH 5, 10, 40, 80, 160, XXH |
| Incoloy 800 Hollow Pipes | ASTM B407 Incoloy Custom Pipes |
| Alloy 800 Seamless Pipes | ASTM B407 Incoloy Thick Wall Pipes |
| 800 Incoloy Alloy Custom Pipes | UNS N08800 / N08810 / N08811 Incoloy welded pipe |
| Incoloy 800 Bush Hex Pipes | ASTM B407 Incoloy Thin Wall Pipes |
| Incoloy Alloy 800 Thick Wall Pipes | Incoloy 800 Round Pipes |
| 800 Incoloy ERW Pipes | Schedule 5S Incoloy DIN NR. 1.4876 Pipes |
| ASME SB407 Incoloy 800 EFW Pipes | Schedule 40 Inconel Alloy 800 Pipes |
| Incoloy DIN NR. 1.4876 SMLS Pipes | Alloy 800 UNS N08800 Polished Pipes |
| Capillary ASTM B407 Incoloy 800 Thin Pipes | High pressure UNS N08800 Pipes |
| Inconel Alloy 800HT Hollow Pipes | 800HT Alloy Electropolished Pipes |
| ASTM B407 800 Incoloy Custom Pipes | ASTM B407 Incoloy 800 Capillary Pipes |
| Alloy 800 UNS N08800 Round Pipes | Alloy 800 Exhaust Pipes |
| 800HT Alloy Square Pipes | Incoloy 800 Thin Wall Pipes |
| Alloy 800 Rectangular Pipes | Small diameter Incoloy 800 pipe |
| Incoloy 800 Hexagonal Pipes | Nickel Alloy 800 Pipes material |
| Incoloy 800 Bush Hex Pipes | 1.4876 Alloy 800 Clad Pipes |
| Nickel Alloy 800 Fabricated Pipes | ASTM B407 800 Incoloy Annealed pipe |
| Description | Price Per Unit (INR) |
|---|---|
| Incoloy 800h Smls Pipe To Astm B 407 Gruns No 8810 In 5 To 7 Mtrs Length Nace Mr-0175 Size:3 Nbxsch 40s | 46,169 |
| Incoloy Pipe:pipe Wwelded Sch 120 Incoloy 800 Uns No8800 Rt 100% 18x1mr Lg | 764,624 |
| Seamless Incoloy Steel Pipe Astm B407 (Unsn08810) Incoloy 800h Size 4nb X Sch 40s | 18,337 |
| Seamless Incoloy Steel Pipe Astm B407 (Unsn08810) Incoloy 800h Size 6nb X Sch 40s | 35,340 |
| Alloy | Product form | Dimension |
|---|---|---|
| INCOLOY 800 (32 Ni/21 Cr) | Pipe; cold drawn, pickled, annealed | 13.72 x 2.24 mm (¼"nb sch40s) |
| INCOLOY 800HT (32 Ni/21 Cr) | Pipe; seamless, cold finished, solution annealed | 26.67 x 3.91 mm (¾"nb sch80s) |
| INCOLOY 800HT (32 Ni/21 Cr) | Pipe; cold drawn, pickled, solution annealed | 33.40 x 3.38 mm (1"nb sch40s) |
| ALLOY 800HT (32 Ni/21 Cr) | Pipe; seamless, cold finished, annealed | 33.40 x 4.55 mm (1"nb sch80s) |
| ALLOY 800HT (32 Ni/21 Cr) | Pipe; seamless, cold finished, annealed | 48.26 x 3.68 mm (1½"nb Sch40s) |
| INCOLOY 800 (32 Ni/21 Cr) | Pipe; cold drawn, pickled, annealed | 50.8 x 2.64 mm |
| INCOLOY 800HT (32 Ni/21 Cr) | Pipe; cold drawn, pickled, solution annealed | 60.33 x 3.91 mm (2"nb sch40s) |
| INCOLOY 800HT (32 Ni/21 Cr) | Pipe; cold drawn, pickled, solution annealed | 60.33 x 2.77 mm (2"nb Sch10s) |
| INCOLOY 800HT (32 Ni/21 Cr) | Pipe; cold drawn, pickled, solution annealed | 60.33 x 3.91 mm (2"nb sch40s) |
| INCOLOY 800HT (32 Ni/21 Cr) | Pipe; cold drawn, pickled, solution annealed | 88.90 x 5.49 mm (3"nb sch40s) |
| ALLOY 800HT (32 Ni/21 Cr) | Pipe; seamless, hot finished, pickled, passivated | 114.3 x 6.02 mm (4"nb sch40s) |
Incoloy
Incoloy Refers To A Range Of Superalloys Produced By The Special Metals Corporation Group Of Companies.
Incoloy Compositions (Percentages)
| Alloy Name | Balance Metal |
Chro Mium |
Alu Minum |
Tita Nium |
Carbon | Yttrium Oxide | Copper | Man Ganese |
Cobalt | Nickel | Phos Phorus |
Silicon | Sulphur | Moly Bdenum |
Nb +Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 020 | Fe (~40%) | 20 | N/P | N/P | <0.07 | N/P | 3.5 | <2.0 | N/P | 35 | <0.045 | <1.0 | <0.035 | 2.5 | About 1 |
| DS | Fe (~40%) | 18 | N/P | 0.2 | 0.1 | Nil | 0.5 | 0.8-1.5 | 18 (Co+ Ni 38) |
18 (Co+ Ni 38) |
N/P | 2.3 | 0.03 | ||
| MA956 | Fe (~75%) | 20 | 4.75 | 0.4 | <0.1 | 0.5 | <0.15 | <0.3 | <0.3 | <0.5 | <0.02 | N/P | N/P |
Inconel
Inconel Is A Family Of Austenitic Nickel-Chromium-Based Superalloys.
Inconel Composition
| Inconel | Element (% By Mass) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ni | Cr | Fe | Mo | Nb | Co | Mn | Cu | Al | Ti | Si | C | S | P | B | |
| 600 | 72.0 | 14.0–17.0 | 6.0–10.0 | 1.0 | 0.5 | 0.5 | 0.15 | 0.015 | |||||||
| 617 | 44.2–56.0 | 20.0–24.0 | 3.0 | 8.0–10.0 | 10.0–15.0 | 0.5 | 0.5 | 0.8–1.5 | 0.6 | 0.5 | 0.15 | 0.015 | 0.015 | 0.006 | |
| 625 | 58.0 | 20.0–23.0 | 5.0 | 8.0–10.0 | 3.15–4.15 | 1.0 | 0.5 | 0.4 | 0.4 | 0.5 | 0.1 | 0.015 | 0.015 | ||
| 690 | 59.5 | 30 | 9.2 | 0.35 | 0.01 | 0.02 | 0.35 | 0.019 | 0.003 | ||||||
| 718 | 50.0–55.0 | 17.0–21.0 | Balance | 2.8–3.3 | 4.75–5.5 | 1.0 | 0.35 | 0.2–0.8 | 0.65–1.15 | 0.3 | 0.35 | 0.08 | 0.015 | 0.015 | 0.006 |
| X-750 | 70.0 | 14.0–17.0 | 5.0–9.0 | 0.7–1.2 | 1.0 | 1.0 | 0.5 | 0.4–1.0 | 2.25–2.75 | 0.5 | 0.08 | 0.01 | |||
Types of Packaging:
– Wooden Boxes
– Crates (steel/wooden)
– Special crates for Nickel Pipes and Tubes with each radius separated
– Bundles (hexagonal)
– Packaging for Nickel Alloy Seamless Pipe and Tube as per customer’s requirements
| Specification | Title |
|---|---|
| ASTM B407 | Nickel Iron Chromium Alloy Seamless Pipe |
| ASTM B514 | Welded Nickel Iron Chromium Alloy Pipe |
| ASTM B515 | Welded UNS N08120, N08800, N08810 and UNS N08811 Alloy Pipe |
| ASTM B751 | General Requirements for Nickel and Nickel Alloy Welded Pipe |
| ASTM B775 | General Requirements for Nickel and Nickel Alloy Welded Pipe |
| ASTM B829 | General Requirements for Nickel and Nickel Alloy Seamless Pipe |
| Types | Out diameter | Wall thickness | Length |
|---|---|---|---|
| NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
| Incoloy 800 Seamless Pipe (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
| Incoloy 800 Welded Pipe (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
| Products | OD | WT | Length | |||
| Inch | MM | Inch | MM | Ft max. | Mt max. | |
| Incoloy 800 Tube | 1/2’’-3’’ | 12.0-76.2 | 0.02’’-0.5’’ | 0.5-12.0 | 105’ | 32.00 |
| Incoloy 800 Pipe | NPS1/2’’-6’’ | 21.34-168.3 | Sch10-Sch80 | 2.11-12.7 | 98’ | 30.00 |
Tell us what you need — we'll get back within a few hours.
